• Straatkast:
• 60 - 80 μm polyester poedercoating.
• Geïntegreerde fundering
• Roestvrij staal
• Universele ½ Euro-cilinder
• Weerbestendig montagepaneel
• Afneembaar voorpaneel
• Voorgemonteerde bevestigingspunten voor buis en kabels.
• FM-Box:
• 48 hybride invoerpoorten Ø 3,0 - 8,0 mm.
• Flexibiliteit in FttX concept.
• Flexibiliteit in beheer van het glasvezelnetwerk.
• Geïntegreerde trekontlasting per kabel / buis.
• Eenvoudige waterdichte invoerpoorten voor elke individuele kabel of buis.
• Gestructureerd management van kabels, vezels en lasbeschermers.
• Geschikt voor direct buried klantkabels en buis
• Eenvoudig te installeren.
• Bespaar op arbeidstijd
• IP65 Waterdicht
• Slagvast.
• Scope of delivery: Gf-NVt, FMB including splice cassettes, 4x stainless steel bolts, sealing material, moisture absorber

Power distribution box consisting of distribution cabinet and splice distributor housing (FMB – Fibre Management Box). Removable front door provides quick access when needed. Lock with profile half cylinder secures against unauthorised access. Two-part design, 1/3 of the distributor is buried below ground level. Distribution cabinet made of stainless steel with 60–80 µm polyester powder coating. Overlength management of 6,300 mm of cable or conduit systems is carried out in the distribution cabinet via a pre-assembled cable and conduit guidance system. Stainless steel mounting wall for fixing the splice distributor housing (FMB). Network distributor complies with protection class IP65.
Splice distributor housing with cover (FMB) for providing a slot for up to 2x fibre optic main cables with a diameter of 4.5 to 8.3 mm and 1x additional break-out opening for diameters M12/16/20/25. 48x outputs with integrated strain relief and holder for individual pull-through sealing for fibre optic cables and microducts with a diameter of 3.0 to 8.0 mm. Cover plugs for unused outputs, dustproof and waterproof closing. Mounting rail for slots to hold up to 4x splice cassette holders. Splice cassette holders for up to 4x splice cassettes (12x fibre optics per splice cassette) with a height of 4 mm. Pre-mounted Velcro fastener tape for securing the splice cassettes. Storage for ANT crimp splice protection and mini heat-shrink tubing. Slot for up to 192x optical fibres and splices distributed across 16x splice cassettes.
Dimensions: 1170 x 500 x 250 mm (LxWxH)
Colour: Grey (RAL 7035)
Scope of delivery: Network distributor, splice distributor housing with cover including splice cassettes (pre-assembled), 4 screws, mounting bracket
Installation type: Above ground
Degree of protection: IP65
Chemical resistance: Yes
Vibration resistance: Yes
Impact resistance: Yes
Halogen-free: Yes
Total number of fibres: 192
Number of fibres: 12 (splice cassette)
Number of splice cassettes: 16
Splice cassette height: 4 mm
Cascadable (loop function): No
Loop length: 300 mm (splice cassette)
Bending radius: R = 30 mm (splice cassette)
Splice protection holder: ANT crimp / mini heat-shrink tubing
Number of cable/conduit inlets: 2
Cable/conduit inlet Ø: 4.5 – 8.3 mm
Number of cable/conduit break-out openings: 1
Cable/conduit break-out opening Ø: M12/16/20/25
Number of cable/conduit outputs: 48
Cable/conduit output Ø: 3.0 – 8.0 mm
Fastening option: Screw attachment
Storage temperature range: -10 °C / +50 °C
Installation temperature range: -10 °C / +50 °C
Operating temperature range: -20 °C / +60 °C