• Met snelle bevestiging voor montage zonder pleisterwerk
• Met 4 x 3 schroefhouders
• Zijkantneutrale combinatie
• Veelzijdig doorlussen
• Standaard hartafstand 71 mm

One-gang junction box, air-tight with multi-membrane, as an electronics box for flush-mounting/masonry installation, flush-mounting box. Flush-mounting one-gang junction box design as an electronics box in accordance with DIN EN 60670/DIN VDE 0606 and DIN 49073, made of plastic, air-tight design in accordance with DIN 18015-5.
Installation opening Ø 60 mm, installation opening 152 mm x 82 mm, depth 68 mm, combination distance 71 mm, with fixing for installation without plaster, with lateral terminal compartment for device inserts and electronic components as well as for compliance with bending radii, protection class IP 20 according to DIN EN 60529, flame-retardant according to DIN EN 60695 up to 650° C, halogen-free according to DIN VDE 0604-2-100, for flush-mounting installation.
Toolless wire entries for cables and EN conduits with diameters of 20/25/32 (3 x 20 mm/25 mm and 3 wire entries in the combination areas, 2 x 32 mm, 3 x 20 mm/25 mm in the side wall, as well as 8 segmented entries for up to 4 wire entries each for NYM cables 3 x 1.5 mm², 3 x 2.5 mm² or 5 x 1.5 mm², 5 x 2.5 mm² or 7 x 1.5 mm², 2x 25 mm and 4 wire entries in the box base,
open through-wiring, fully insulated through-wiring near the base, with 4x3 screw domes, with 2 device screws