Company
Service
Media library
News
Careers
Contact
KAISER GROUP
Go back
Glow wire tested in-wall mounted back boxes 850ºC
- Flat bearing surface thanks to 4 support points - Voltage transfer is prevented by countersunk screw mounts - Essential in timber construction - Extension frame for sub-ceiling insulation available
- Compatible with Feller SNAPFIX® - Essential in timber construction - Electrically well-insulated, shock and pressure-resistant. - Flat bearing surface thanks to 4 support points - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
1 / 2
Open Cadenas Modal
- Flat bearing surface thanks to 4 support points - Voltage transfer is prevented by countersunk screw mounts - Essential in timber construction - Extension frame for sub-ceiling insulation available
- Compatible with Feller SNAPFIX® - Essential in timber construction - Electrically well-insulated, shock and pressure-resistant. - Flat bearing surface thanks to 4 support points - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
  • Flat bearing surface thanks to 4 support points
  • Voltage transfer is prevented by countersunk screw mounts
  • Essential in timber construction
  • Extension frame for sub-ceiling insulation available
Read more Read less

In-wall back box 115 x 115 x 101 mm, quadratic glow wire tested 850ºC

AGRO AG
Artikel-No.: 9908.01.850
E-No: 155011898
EAN: 7611614231532
SZ
CE
Product length: 115 mm
Product width: 115 mm
Product depth: 101 mm
Number of entries: 24
For conduit Ø: 20 mm, 25 mm
Shipping: 30
More product details
Datasheet (PDF)

accessories

- Conforms to EN 60670-1 - UV-resistant
Push-on cover with diagonal support option, RAL 9010
Artikel-No. 9909.22
E-No 155910028
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - With two isolated and tested centre screws (L=40/70 mm) - UV-resistant
Push-on cover with insulated centre screw, RAL 9010
Artikel-No. 9909.22.37
E-No 155911028
  • Conforms to EN 60670-1
  • With two isolated and tested centre screws (L=40/70 mm)
  • UV-resistant
See more
- Conforms to EN 60670-1 - With two isolated and tested centre screws (L=40/70 mm) - UV-resistant
Push-on cover with diagonal support option, RAL 9010
Artikel-No. 9909.10
E-No 155910808
  • Conforms to EN 60670-1
  • With two isolated and tested centre screws (L=40/70 mm)
  • UV-resistant
See more
- Conforms to EN 60670-1 - With two isolated and tested centre screws (L=40/70 mm) - UV-resistant
Push-on cover with insulated centre screw, RAL 9010
Artikel-No. 9909.10.37
E-No 155911808
  • Conforms to EN 60670-1
  • With two isolated and tested centre screws (L=40/70 mm)
  • UV-resistant
See more
DIAGONAL SUPPORT
DIAGONAL SUPPORT
Artikel-No. 9907.60
E-No 155910128
See more
- Conforms to EN 60670-1 - With two isolated and tested centre screws (L=40/70 mm) - UV-resistant
Push-on cover with central fixing, RAL 9010
Artikel-No. 9909.20
E-No 155910018
  • Conforms to EN 60670-1
  • With two isolated and tested centre screws (L=40/70 mm)
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Push-on cover with corner fixing, RAL 9010
Artikel-No. 9909.12
E-No 155910408
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Screwed-on cover with plastic screws, RAL 9010
Artikel-No. 9909.02
E-No 155910308
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Screwed-on cover with metal screws, RAL 9010
Artikel-No. 9909.05
E-No 155910508
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Cover with socket (Swiss type 13), RAL 9010
Artikel-No. 9909.02.13
E-No 155990108
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Cover with socket (Swiss type 15), RAL 9010
Artikel-No. 9909.02.15
E-No 155990208
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Cover with socket (Swiss type 23), RAL 9010
Artikel-No. 9909.02.23
E-No 155990408
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Cover with socket (Swiss type 25), RAL 9010
Artikel-No. 9909.02.25
E-No 155990508
  • Conforms to EN 60670-1
  • UV-resistant
See more
- with full neoprene seal - Cover fixing with enclosed screws, non-rusting
Waterproof cover
Artikel-No. 9909.03
E-No 155900098
  • with full neoprene seal
  • Cover fixing with enclosed screws, non-rusting
See more
- For increasing the front-to-back depth of the box or for sub-ceiling insulation - Multiple extensions possible - With two fixing screws
Extension piece - 13mm - for junction box
Artikel-No. 9908.68
E-No 155992098
  • For increasing the front-to-back depth of the box or for sub-ceiling insulation
  • Multiple extensions possible
  • With two fixing screws
See more
- For increasing the front-to-back depth of the box or for sub-ceiling insulation - Multiple extensions possible - With two fixing screws
Extension piece - 45mm - for junction box
Artikel-No. 9908.68.45
E-No 155992498
  • For increasing the front-to-back depth of the box or for sub-ceiling insulation
  • Multiple extensions possible
  • With two fixing screws
See more

similar

- Flat bearing surface thanks to 4 support points - Voltage transfer is prevented by countersunk screw mounts - Essential in timber construction - Extension frame for sub-ceiling insulation available
In-wall back box 115 x 115 x 76 mm, quadratic glow wire tested 850ºC
Artikel-No. 9909.01.850
E-No 155011398
  • Flat bearing surface thanks to 4 support points
  • Voltage transfer is prevented by countersunk screw mounts
  • Essential in timber construction
  • Extension frame for sub-ceiling insulation available
See more

Glow wire tested in-wall mounted back boxes 850ºC

UP-Dosen und Einlasskasten für den Einbau in Hohldecken, Hohlwänden und auf brennbaren Teilen müssen die Glühdrahtprüfung, nach EN 60695-2-11, mit 850°C bestanden haben.
  • Flat bearing surface thanks to 4 support points
  • Voltage transfer is prevented by countersunk screw mounts
  • Essential in timber construction
  • Extension frame for sub-ceiling insulation available

Application examples

Dimensions / Form

Product length:
115 mm
Product width:
115 mm
Product depth:
101 mm

Connections / Entries

Number of entries:
24
For conduit Ø:
20 mm, 25 mm

Assembly / Installation

Assembly type:
HW (drywall/lightweight construction)
- Conforms to EN 60670-1 - UV-resistant
Push-on cover with diagonal support option, RAL 9010
Artikel-No. 9909.22
E-No 155910028
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - With two isolated and tested centre screws (L=40/70 mm) - UV-resistant
Push-on cover with insulated centre screw, RAL 9010
Artikel-No. 9909.22.37
E-No 155911028
  • Conforms to EN 60670-1
  • With two isolated and tested centre screws (L=40/70 mm)
  • UV-resistant
See more
- Conforms to EN 60670-1 - With two isolated and tested centre screws (L=40/70 mm) - UV-resistant
Push-on cover with diagonal support option, RAL 9010
Artikel-No. 9909.10
E-No 155910808
  • Conforms to EN 60670-1
  • With two isolated and tested centre screws (L=40/70 mm)
  • UV-resistant
See more
- Conforms to EN 60670-1 - With two isolated and tested centre screws (L=40/70 mm) - UV-resistant
Push-on cover with insulated centre screw, RAL 9010
Artikel-No. 9909.10.37
E-No 155911808
  • Conforms to EN 60670-1
  • With two isolated and tested centre screws (L=40/70 mm)
  • UV-resistant
See more
DIAGONAL SUPPORT
DIAGONAL SUPPORT
Artikel-No. 9907.60
E-No 155910128
See more
- Conforms to EN 60670-1 - With two isolated and tested centre screws (L=40/70 mm) - UV-resistant
Push-on cover with central fixing, RAL 9010
Artikel-No. 9909.20
E-No 155910018
  • Conforms to EN 60670-1
  • With two isolated and tested centre screws (L=40/70 mm)
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Push-on cover with corner fixing, RAL 9010
Artikel-No. 9909.12
E-No 155910408
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Screwed-on cover with plastic screws, RAL 9010
Artikel-No. 9909.02
E-No 155910308
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Screwed-on cover with metal screws, RAL 9010
Artikel-No. 9909.05
E-No 155910508
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Cover with socket (Swiss type 13), RAL 9010
Artikel-No. 9909.02.13
E-No 155990108
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Cover with socket (Swiss type 15), RAL 9010
Artikel-No. 9909.02.15
E-No 155990208
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Cover with socket (Swiss type 23), RAL 9010
Artikel-No. 9909.02.23
E-No 155990408
  • Conforms to EN 60670-1
  • UV-resistant
See more
- Conforms to EN 60670-1 - UV-resistant
Cover with socket (Swiss type 25), RAL 9010
Artikel-No. 9909.02.25
E-No 155990508
  • Conforms to EN 60670-1
  • UV-resistant
See more
- with full neoprene seal - Cover fixing with enclosed screws, non-rusting
Waterproof cover
Artikel-No. 9909.03
E-No 155900098
  • with full neoprene seal
  • Cover fixing with enclosed screws, non-rusting
See more
- For increasing the front-to-back depth of the box or for sub-ceiling insulation - Multiple extensions possible - With two fixing screws
Extension piece - 13mm - for junction box
Artikel-No. 9908.68
E-No 155992098
  • For increasing the front-to-back depth of the box or for sub-ceiling insulation
  • Multiple extensions possible
  • With two fixing screws
See more
- For increasing the front-to-back depth of the box or for sub-ceiling insulation - Multiple extensions possible - With two fixing screws
Extension piece - 45mm - for junction box
Artikel-No. 9908.68.45
E-No 155992498
  • For increasing the front-to-back depth of the box or for sub-ceiling insulation
  • Multiple extensions possible
  • With two fixing screws
See more
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
- Flat bearing surface thanks to 4 support points - Voltage transfer is prevented by countersunk screw mounts - Essential in timber construction - Extension frame for sub-ceiling insulation available
In-wall back box 115 x 115 x 76 mm, quadratic glow wire tested 850ºC
Artikel-No. 9909.01.850
E-No 155011398
  • Flat bearing surface thanks to 4 support points
  • Voltage transfer is prevented by countersunk screw mounts
  • Essential in timber construction
  • Extension frame for sub-ceiling insulation available
See more