To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Installation housing

- Toolless combination entry for M20/M25 conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside

HaloX® system for in-situ concrete

- for retrofitting in solid ceilings
- required hole size Ø 150-160 mm
- Take into consideration the ceiling thickness - at least 3 cm concrete cover is needed on top of the box
- suitable for front parts with Art. No. 1281-XX

HaloX® system for retrofitting in concrete ceilings

- One-part housing with integrated mineral fibreboard
- Toolless combination entry for M20/M25 conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside

HaloX® system for factory production

- installation height for built-in luminaires or loudspeakers max. 100 mm
- consists of front and rear parts
- only in combination with front rings 1293-16 up to 1293-71, in facing concrete with front rings 1293-80 to 1293-87
- incl. support elements for installation heights 100/150/200 mm

KompaX®1 system for in-situ concrete and factory production

- for luminaire or loudspeaker housings
- prevents conduits from being inserted too far
- secures conduit against falling out even under extreme load
- required opening Ø in the housing tunnel: 21 mm (cut using universal opening cutter Art. No. 1085-80)

KompaX® system – accessories

- for halogen luminaires and pivoting LED luminaires
- max. installation height for low-voltage luminaire 65 mm, HV luminaire 70 mm
- Heat distortion resistant to 220°C
- lamp wattage LV: max. 35 W with AL reflector / 20 W Cool-Beam
- lamp wattage for HV luminaires max. 35 W with AL reflector (socket GU 10)
- max. LED lamp output 6.6 W
- Front can be used on both sides

ThermoX® system for insulated hollow ceilings

- for installing luminaires, loudspeakers, displays and much more
- Minimum distance inside: min. 40 mm all round
- integrated stress relief (retention force) in accordance with DIN VDE 0606 / DIN EN 60670-1
- only for insulation material with heat resistance > 250 °C
- use only tested heat-resistant cables (N2 GMH 2G) and temperature-resistant terminals (e.g. T100)
- for installation devices up to LxW 120 x 220 mm or Ø 120 mm
- Heat distortion resistant to 220°C
- with 4 screws (FX⁴)

EnoX® system for insulated hollow ceilings and walls

- for rigid and pivoting LED luminaires
- circumferential airtight sealing lip
- Swivel trough for alignment of the luminaire

ThermoX® LED system for insulated hollow ceilings

- for installation in insulated hollow ceilings
- retrofitting from below
- toolless mounting
- For Ø 68 – 80 mm installation openings
- height adjustable from 100 – 40 mm

Spacers for luminaires in insulated ceilings

- Pre-drilled M20 and M25 pipe entries
- Tested with the most common LED spotlights
- For insulated or uninsulated false or suspended ceilings
- Building material class A2-s1, d0, can serve as preventive fire protection
- Fully closed installation housing despite conduit entries

ThermoX® Lite for hollow ceilings