AK2 Data basic housing with screw holes fixing
Artikel-No.
AT1963
- Suitable for attachment to wiring-duct mounting plate (art. no. AT2228).
- Each cable box includes 2 soft slide-in data lead-ins and 1 slide-in blind cover'.
- Matching AK2 front part can be ordered separately.
- 2 cable entries and 1 blanking plug are included per item
- Matching AK2 front part can be ordered separately
- Suitable for cable support systems from well-known manufacturers
AK2 Data front part for max. 6 modules
Artikel-No.
AT1964
- Raised AK2 cover equipped with 6 knock-out ports for the placement of adapters.
- The adapter allows attachment of any brand or type of RJ45 connector and can be ordered separately.
- The cover has provisions along the edge to allow easy labelling.
- Front part equipped with break-out openings for adapters to accommodate Keystone modules
AK2 Data front part for max. 4 modules
Artikel-No.
AT1965
- Raised AK2 cover equipped with 4 knock-out ports for the placement of adapters.
- The adapter allows attachment of almost any brand or type of RJ45 connector and can be ordered separately.
- The cover has provisions along the edge to allow easy labelling.
- Front part equipped with break-out openings for adapters to accommodate Keystone modules
Blanking plug
Artikel-No.
AT1970
- Blind cover for sealing an open break-out port in the AK2-D cover after a change or a mistake.
- Blind cover for sealing an open break-out port in the Patch Cabinet after a change or a mistake.
- The blind cover is used to seal any opening behind the dust cap in the Universal Data Box.
- can be used in AK2 Data front parts
Adapter A, CommScope Systimax type
Artikel-No.
AT1972
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Avaya-Systimax (see selection table on the website).
- Version 'AL' has a label window for applying a coding strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules
- suitable for data modules from CommScope Systimax and others
Adapter B, 20.4 x 14.9 mm type
Artikel-No.
AT1974
- Adapter for mounting in the AK2-D lid of an RJ45 connector from AMP-Tyco, Brand-rex and Nexans, among others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules, mounting cut-out: 20.4 x 14.9 mm
- suitable for data modules from MP-Tyco, Brand-Rex and Nexans, and others
Adapter C, Keystone type
Artikel-No.
AT1976
- Adapter for mounting in the AK2-D lid of an RJ45 connector from 3M, Krone, Siemon, Radial and others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules, mounting cut-out: 19.4 x 14.9 mm
- suitable for Keystone modules from Rutenbeck, Metz Connect, Telegärtner, Digitus, 3M, and others
Adapter RM, Reichle & De-Massari type
Artikel-No.
AT1980
- Adapter for attachment of a Reichle & DeMassari RJ45 connector in the Universal Data Box, Patch Cabinet or the AK2-D cover.
- can be used in AK2 Data front parts
- for mounting RJ45 modules
- suitable for data modules from Reichle & De-Massari and others
Adapter L, LexCom type
Artikel-No.
AT1986
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules
- suitable for data modules from LexCom and others