Products

An overview of our innovations

Here you can find our innovations quickly and clearly summarised on a single page. Discover the wide range of fields of application and solutions. Each product is also accompanied by a short, informative video where you can learn more about how to install it quickly and safely.

Read more

- The conduit entries are secured against accidental opening due to impacts from reinforcement steel or kicks
- Open conduit entries are easily identified during inspections thanks to the junction box’s two colours
- Horizontal and vertical slits in the sealing membrane enable the marking cross on the formwork to be seen through the membrane
- Two-part design
- Version with tunnel extension (Art.-No. 9907.30) accommodates a driver for LED strip lighting in residential buildings

Electrical installation

- Progress EMV powerCONNECT
- Two-piece sealing insert
- not overall length insulated

Industrial products

E-mobility

KAISER Connectivity / Fibre optic broadband expansion

Electrical installation

With AGRO’s innovative installation solutions, you can rely on quality, safety and practical installation. Our product range supports standardised electrical installations and offers suitable solutions for a wide variety of applications – from Flush-mounting and cavity wall installations to concrete construction and fire protection.

Concrete construction

- Compatible with Feller SNAPFIX®
- Suitable for screw or claw fixing of accessories
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- With injection-moulded signal cover
- For assembling combinations, centre distance 60 mm
- Low-lying plaster grips

Flush-mounted

- Compatible with Feller SNAPFIX®
- for plate thickness > 10 - 40 mm
- Airtight design with sealing membranes
- Toolless pipe inlets
- For Ø 20 mm and Ø 25 mm
- No shadow gaps of the covers
- Pipe inlet 90° swivelling

Hollow wall

- 5-pole input and output, including locks, for a 3-phase power supply.
- Cover with (2+2)x3p chassis parts, including locks, power supply from L1 and L2.
- Pre-shaped plastic assembly bracket for quick click-assembly on all common cable ducts.
- Wiring: 2.5 mm²
- Set of mounting brackets for quick "click" mounting on all common cable trays

Plug-in installation

- Compatible with Feller SNAPFIX®
- for F30-F90 or EI30-EI90 fire-protection walls
- For timber stud walls F30-F90 or EI30-EI90
- VKF approval 21042
- also for opposing installation
- for plate thickness > 10 - 40 mm
- matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm

Prefix® concrete boxes for fastening to reinforcement

- Toolless combination entry for M20/M25 conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside

Installation enclosure

- For cable introductions
- With plug-in cover
- Halogen-free

Surface-mounted

- for cables 4 - 25 mm² or round conductors up to Ø 6.6 mm
- low contact resistance due to two terminals

Earthing / potential equalisation

Feller SNAPFIX® compatible products

- With holder and centring drill
- Fits all electric drills with 13 mm chuck
- For junction boxes Art. No. 9073-01/-78 and 9273-92/-78 as well as installation housing 9273-50

Tools

- Standard design for all common tubes
- special designs "made to measure

Press ring sealing inserts

- Two-part design with secure catch mechanism
- Air-tight component closure for front and rear installation in the boarding of wall elements or modules
- Flexible cable pull-in from both directions thanks to 90° bend without abutting edges
- Wall connection element can be used on both sides for 90° bends and electrical conduit
- Flat collar for a firm and flush fit in the wall element

Modular and prefabricated house construction

Cable glands

AGRO Progress® and Syntec® cable glands. The best for cables.
AGRO Progress® cable glands, made from plastic or metal and featuring protruding compression technology, ensure a high level of sealing and extremely gentle strain relief for cables
AGRO Syntec® cable glands, available in plastic or brass, are the ideal solution for your day-to-day installation tasks
AGRO Progress® EMC cable glands, made from brass, ensure a low-impedance connection between the shielding braid and the metal housing, whilst also providing a secure cable entry
AGRO Ex Progress® cable glands, made from plastic or brass, are certified for use in potentially explosive atmospheres.

- Syntec® facade lead-through with push-in connection
- Black

Facade feed-through

- Two-piece sealing insert
- not overall length insulated

Cable glands

Accessories for cable glands

- High tightness IP6X / IPX8 / IPX9K according to EN62444
- Absolute process safety
- Flexibility in the clamping area due to multiLAYER sealing units
- High pull-out forces according to EN 62444
- Fast and cost-saving assembly
- Extremely robust and flexible
- No auxiliary materials and lubricants necessary
- Prefabrication

Multiple feed-through MCE

Cable protection hoses

AGRO universal swivel adapter nickel-plated brass

Accessories for cable protection hoses

Connectivity / Fibre-optic broadband roll-out

Access network – NE3 (splice)
Building network – NE4 (splicing)
Building network – NE4 (pluggable)

Optical telecommunications socket (OTO) splicing

Optical telecommunications socket (OTO) E3S pluggable

Building distribution

- Flexibility in FttH concept.
- Multi-functional product.
- Suitable for cable / duct diameters: Ø 5,5 mm – Ø 10,0 mm.
- Integrated strain relief per cable / duct.
- Window Cut possibility.
- Plug & Play installation.
- 2x 12 splice protectors heatshrink Ø 2.4 mm x 45 mm

Street distribution

Products

An overview of our innovations

Electrical installation

Cable glands

Connectivity / Fibre-optic broadband roll-out