Company
Service
Media library
News
Careers
Contact
KAISER GROUP
Go back
Flush-mounting installation boxes
- dimensions in accordance with German DIN 49073 - For M20/M25 conduits and cables
Open Cadenas Modal
  • dimensions in accordance with German DIN 49073
  • For 20/25 mm conduits and cables

Device box for flush-mounting/masonry installation, flush-mounting box, designed as a flush-mounting device box in accordance with DIN EN 60670/VDE 0606 and DIN 49073, made of plastic.
Installation opening Ø 60 mm, installation opening Ø 82 mm, depth 46 mm, combination distance 71 mm, protection class IP 20 according to DIN EN 60529, flame retardant according to DIN EN 60695 up to 650° C, halogen-free according to DIN VDE 0604-2-100, for flush-mounting installation,
Entries with break-out openings for electric cables and DIN EN conduits with a diameter of 20/25 mm (2x 20 mm/25 mm in both connectors, 2 x 20 mm and 2 x 25 mm in the side wall, 1 x 20 mm in the box base).
With 4 screw domes and 2 expanding claw fields, with 2 device screws
Read more Read less

One-gang box, Depth 46 mm

Kaiser GmbH & Co.KG
Artikel-No.: 1055-04
EAN: 4013456110502
Halogen-free
VDE
Product depth: 46 mm
Type of entry: electric cable, conduit
Number of entries: 7
For conduit Ø: 20 mm, 25 mm
Wire entry for number of cores and nominal conductor cross-section (mm²) when using NYM: 3x1.5, 3x2.5, 5x1.5, 5x2.5
Type of entry: break-out opening
Halogen-free: Yes
Packaging / Shipping: 25 / 500
More product details
Datasheet (PDF)

accessories

- Reusable - protects interior of box, screwing dome and screw heads when plastering
Signal cover Ø 60 mm
Artikel-No. 1181-60
E-No 372800229
  • Reusable
  • protects interior of box, screwing dome and screw heads when plastering
See more
- to compensate for deep-seated boxes - To maintain IP protection class - With 2 screwed-in device screws - with 2 ring attachment screws
Plaster compensation ring for one-gang and one-gang junction boxes Ø 60 mm, Height 12 mm
Artikel-No. 1155-61
  • to compensate for deep-seated boxes
  • To maintain IP protection class
  • With 2 screwed-in device screws
  • with 2 ring attachment screws
See more
- for all one-gang, one-gang junction and junction boxes - with central exit for light hook - flat cover edge - surface roughened
Universal VDE cover, halogen-free
Artikel-No. 1184-77
  • for all one-gang, one-gang junction and junction boxes
  • with central exit for light hook
  • flat cover edge
  • surface roughened
See more
- With permanent elastic spring
Cover for boxes Ø 60 mm
Artikel-No. 1159-25
E-No 372801729
  • With permanent elastic spring
See more
- for retrofit sealing of all existing one-gang boxes and one-gang junction boxes with Ø 68 mm - permanently flexible plastic
Sealing inserts
Artikel-No. 1040-01
  • for retrofit sealing of all existing one-gang boxes and one-gang junction boxes with Ø 68 mm
  • permanently flexible plastic
See more

similar

- dimensions in accordance with German DIN 49073 - For M20/M25 conduits and cables
One-gang box with device screws, Depth 46 mm
Artikel-No. 1056-04
E-No 372101329
  • dimensions in accordance with German DIN 49073
  • For 20/25 mm conduits and cables
See more

Flush-mounting installation boxes

With the innovative KAISER UP-PLUS technology, the flush-mounting range impresses with a PLUS in terms of fitting convenience and flexibility. This range with the practical combination connection piece for quick, safe combinations ensures a torsion-proof pluggable connection for combinations with the snap-in connector, as well as a guaranteed standardised combination distance of 71 mm. The variable combination connection pieces are suitable for M20/M25 conduits and cables, and are standard for KAISER flush-mounting boxes. There are further entries for M20/M25 conduits and cables around the circumference of the box, as well as an entry for M20 conduits or cables at the bottom of the box. Four screw domes and two expanding claw fields offer secure, flexible mounting options for all types of devices, and thus round off the flush-mounting range.
  • Variable combination connection piece for conduits up to 25 mm and cables
  • Snap-in connector for torsion-proof and guaranteed standardised combination distance of 71 mm
  • Flexible for screw and expanding claw fixing
  • Optimum installation space
  • UP-PLUS – with distance support, tunnel connector and KLEMMFIX® for quick, secure installation

Entries for cables and DIN EN conduits

Entries for cables and DIN EN conduits

Secure combination with the combination connection piece

An audibly secure combination with the KAISER combination connection piece. Place the boxes next to each other. Place the centering piece in the groove and press together until you hear a "click". Now you have a torsion-proof combination with a standardised combination distance of 71 mm.

Entries for cables and DIN EN conduits

Entries for cables and DIN EN conduits

Fitting instructions

After breaking out the cable or conduit,
After breaking out the cable or conduit,
simply insert it into the box.
simply insert it into the box.
The simple break-out opening for cable and conduit entry reduces the installation effort and simplifies the fitting.
The simple break-out opening for cable and conduit entry reduces the installation effort and simplifies the fitting.
Installation example for a switch/socket combination.
Installation example for a switch/socket combination.

Combination with one-gang box and one-gang junction box, conduit entry and KLEMMFIX®

Position the KLEMMFIX® on the bottom of the box...
Position the KLEMMFIX® on the bottom of the box...
...then latch on.
...then latch on.
Since the plaster penetrates up to the lamella ring...
Since the plaster penetrates up to the lamella ring...
...the box is securely and permanently fixed in place.
...the box is securely and permanently fixed in place.

Mounting and connection option with distance support

Position the distance support on the support connector...
Position the distance support on the support connector...
...and create the box combination at a 91-mm spacing.
...and create the box combination at a 91-mm spacing.
The distance support (item no. 1159-34) ensures an exact, safe distance of 91 mm.
The distance support (item no. 1159-34) ensures an exact, safe distance of 91 mm.
Example of installation with a 91-mm spacing.
Example of installation with a 91-mm spacing.

Assembly and connection option with tunnel connector

Remove the break-out openings under the support connector on both one-gang junction boxes.
Remove the break-out openings under the support connector on both one-gang junction boxes.
Plug the one-gang junction boxes together and insert the tunnel connector (item no. 1159-36) between the two one-gang junction boxes...
Plug the one-gang junction boxes together and insert the tunnel connector (item no. 1159-36) between the two one-gang junction boxes...
...then plug the support connector in from below for fully insulated through-wiring in the floor area.
...then plug the support connector in from below for fully insulated through-wiring in the floor area.
Cable entry through the tunnel connector. For installation with low-seated installation accessories.
Cable entry through the tunnel connector. For installation with low-seated installation accessories.

Fitting instructions

After breaking out the cable or conduit,
After breaking out the cable or conduit,
simply insert it into the box.
simply insert it into the box.
The simple break-out opening for cable and conduit entry reduces the installation effort and simplifies the fitting.
The simple break-out opening for cable and conduit entry reduces the installation effort and simplifies the fitting.
Installation example for a switch/socket combination.
Installation example for a switch/socket combination.

Combination with one-gang box and one-gang junction box, conduit entry and KLEMMFIX®

Position the KLEMMFIX® on the bottom of the box...
Position the KLEMMFIX® on the bottom of the box...
...then latch on.
...then latch on.
Since the plaster penetrates up to the lamella ring...
Since the plaster penetrates up to the lamella ring...
...the box is securely and permanently fixed in place.
...the box is securely and permanently fixed in place.

Dimensions / Form

Product depth:
46 mm

Connections / Entries

Type of entry:
electric cable, conduit
Number of entries:
7
For conduit Ø:
20 mm, 25 mm
Wire entry for number of cores and nominal conductor cross-section (mm²) when using NYM:
3x1.5, 3x2.5, 5x1.5, 5x2.5
Type of entry:
break-out opening

Assembly / Installation

Assembly type:
UP (solid construction)

Safety / Properties

Halogen-free:
Yes
Special application:
Without

Features

Number of screw domes:
4

Approvals / Certifications

VDE:
Yes
- Reusable - protects interior of box, screwing dome and screw heads when plastering
Signal cover Ø 60 mm
Artikel-No. 1181-60
E-No 372800229
  • Reusable
  • protects interior of box, screwing dome and screw heads when plastering
See more
- to compensate for deep-seated boxes - To maintain IP protection class - With 2 screwed-in device screws - with 2 ring attachment screws
Plaster compensation ring for one-gang and one-gang junction boxes Ø 60 mm, Height 12 mm
Artikel-No. 1155-61
  • to compensate for deep-seated boxes
  • To maintain IP protection class
  • With 2 screwed-in device screws
  • with 2 ring attachment screws
See more
- for all one-gang, one-gang junction and junction boxes - with central exit for light hook - flat cover edge - surface roughened
Universal VDE cover, halogen-free
Artikel-No. 1184-77
  • for all one-gang, one-gang junction and junction boxes
  • with central exit for light hook
  • flat cover edge
  • surface roughened
See more
- With permanent elastic spring
Cover for boxes Ø 60 mm
Artikel-No. 1159-25
E-No 372801729
  • With permanent elastic spring
See more
- for retrofit sealing of all existing one-gang boxes and one-gang junction boxes with Ø 68 mm - permanently flexible plastic
Sealing inserts
Artikel-No. 1040-01
  • for retrofit sealing of all existing one-gang boxes and one-gang junction boxes with Ø 68 mm
  • permanently flexible plastic
See more
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
- dimensions in accordance with German DIN 49073 - For M20/M25 conduits and cables
One-gang box with device screws, Depth 46 mm
Artikel-No. 1056-04
E-No 372101329
  • dimensions in accordance with German DIN 49073
  • For 20/25 mm conduits and cables
See more