Company
Service
Media library
News
Careers
Contact
KAISER GROUP
Go back
Prefix® installation system
- Facilitates fixing to the reinforcement - Fast and easy installation on opposing formwork without support element and abutment - Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
  • Facilitates fixing to the reinforcement
  • Fast and easy installation on opposing formwork without support element and abutment
  • Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
Read more Read less

Prefix® wing set, 4 pieces for AGRO inlet box 9902.xx

AGRO AG
Artikel-No.: 9940.25
E-No: 155906308
EAN: 7611614333014
Product length: 150.1 mm
Product width: 59 mm
Product depth: 16 mm
Shipping: 5
More product details
Datasheet (PDF)

accessories

- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 2x1
Artikel-No. 9902.22
E-No 372118219
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 3x1
Artikel-No. 9902.23
E-No 372118319
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 2x2
Artikel-No. 9902.24
E-No 372118229
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 4x1
Artikel-No. 9902.24.40
E-No 372118419
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 3x2
Artikel-No. 9902.26
E-No 372118329
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 4x2
Artikel-No. 9902.28
E-No 372118429
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 3x3
Artikel-No. 9902.29
E-No 372118339
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Flush-mounted box 4x3
Artikel-No. 9902.12
E-No 372118439
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more

similar

- Facilitates fixing to the reinforcement - Fast and easy installation on opposing formwork without support element and abutment - Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
Prefix® wing set, 12 pieces for AGRO inlet box 9902.xx
Artikel-No. 9940.50
E-No 155907308
  • Facilitates fixing to the reinforcement
  • Fast and easy installation on opposing formwork without support element and abutment
  • Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
See more

Mounting of the Prefix® wing brackets on the Varifix® inlet box

The nail channels of the AGRO inlet box also serve as connectors for the Prefix wing brackets to slide onto.
The nail channels of the AGRO inlet box also serve as connectors for the Prefix wing brackets to slide onto.
The Prefix wing brackets have round connection holes at one end ..
The Prefix wing brackets have round connection holes at one end ..
... and are slid onto the nail channel ..
... and are slid onto the nail channel ..
... until a "click" is heard and the wing bracket can move no further.
... until a "click" is heard and the wing bracket can move no further.
Pre-connect to the reinforcement, quickly and easily, using the Prefix installation technology.
Pre-connect to the reinforcement, quickly and easily, using the Prefix installation technology.
Checking the concrete cover. If any need to adjust, the wing brackets may be removed and rotated 180°C.
Checking the concrete cover. If any need to adjust, the wing brackets may be removed and rotated 180°C.
Securing with tying wire. The use of cable ties is not recommended.
Securing with tying wire. The use of cable ties is not recommended.
Tying with wire at every point where a wing bracket has contact with a rebar reduces the risk of the unit becoming displaced during concreting.
Tying with wire at every point where a wing bracket has contact with a rebar reduces the risk of the unit becoming displaced during concreting.

Note regarding tying of Prefix® wing brackets

When installing with Prefix®, care should be taken to ensure that the contact points with the reinforcement are outside the hatched zone in the picture.
Tying of Prefix® wing brackets
When installing with Prefix®, care should be taken to ensure that the contact points with the reinforcement are outside the hatched zone in the picture.

Compatibility of Prefix® wing brackets

The 1x1 inlet boxes 9902.21 and 9902.21.14 cannot be equipped and installed with the Prefix® wing brackets. Articles 9941 & 9940 may be used for this purpose.

Dimensions / Form

Product length:
150.1 mm
Product width:
59 mm
Product depth:
16 mm

Assembly / Installation

Assembly type:
BB (solid construction)

Safety / Properties

Special application:
on-site mixed concrete
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 2x1
Artikel-No. 9902.22
E-No 372118219
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 3x1
Artikel-No. 9902.23
E-No 372118319
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 2x2
Artikel-No. 9902.24
E-No 372118229
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 4x1
Artikel-No. 9902.24.40
E-No 372118419
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 3x2
Artikel-No. 9902.26
E-No 372118329
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 4x2
Artikel-No. 9902.28
E-No 372118429
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Inlet casing 3x3
Artikel-No. 9902.29
E-No 372118339
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - Nail domes also serve as Prefix® connection points - Increased stability - Separately guided nailing points - With separator wall and stabilisation lid - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Flush-mounted box 4x3
Artikel-No. 9902.12
E-No 372118439
  • Compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Facilitates fixing to the reinforcement - Fast and easy installation on opposing formwork without support element and abutment - Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
Prefix® wing set, 12 pieces for AGRO inlet box 9902.xx
Artikel-No. 9940.50
E-No 155907308
  • Facilitates fixing to the reinforcement
  • Fast and easy installation on opposing formwork without support element and abutment
  • Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
See more