Each flush-mounted junction box has a large number of break-out conduit inlets. They are equally suitable for use with flexible plastic conduits of the corrugated (KRFG) or the smooth (KRF) type. The electrician can easily and quickly insert the conduits into the box or pull them through.
Flush-mounted junction boxes for flexible plastic conduits (KRF or KRFG)
Flush-mounted junction box - 101mm
Product length:
115 mm
Product width:
115 mm
Product depth:
101 mm
For conduit Ø:
20 mm, 25 mm
Shipping:
30
accessories
Push-on cover with diagonal support option, RAL 9010
Artikel-No.
9909.22
E-No
155910028
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with diagonal support option, RAL 7047
Artikel-No.
9909.22.65
E-No
155910138
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with diagonal support option, RAL 7012
Artikel-No.
9909.22.67
E-No
155910148
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with diagonal support option, RAL 9005
Artikel-No.
9909.22.60
E-No
155910158
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with insulated centre screw, RAL 9010
Artikel-No.
9909.22.37
E-No
155911028
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with insulated centre screw, RAL 7047
Artikel-No.
9909.22.37.65
E-No
155910238
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with insulated centre screw, RAL 7012
Artikel-No.
9909.22.37.67
E-No
155910248
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with insulated centre screw, RAL 9005
Artikel-No.
9909.22.37.60
E-No
155910258
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with diagonal support option, RAL 9010
Artikel-No.
9909.10
E-No
155910808
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with insulated centre screw, RAL 9010
Artikel-No.
9909.10.37
E-No
155911808
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Extension piece - 13mm - for junction box
Artikel-No.
9908.68
E-No
155992098
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
Push-on cover with central fixing, RAL 9010
Artikel-No.
9909.20
E-No
155910018
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Screwed-on cover with plastic screws, RAL 9010
Artikel-No.
9909.02
E-No
155910308
- Conforms to EN 60670-1
- UV-resistant
Screwed-on cover with metal screws, RAL 9010
Artikel-No.
9909.05
E-No
155910508
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with corner fixing, RAL 9010
Artikel-No.
9909.12
E-No
155910408
- Conforms to EN 60670-1
- UV-resistant
Waterproof cover
Artikel-No.
9909.03
E-No
155900098
- with full neoprene seal
- Cover fixing with enclosed screws, non-rusting
Cover with socket (Swiss type 13), RAL 9010
Artikel-No.
9909.02.13
E-No
155990108
- Conforms to EN 60670-1
- UV-resistant
Cover with socket (Swiss type 23), RAL 9010
Artikel-No.
9909.02.23
E-No
155990408
- Conforms to EN 60670-1
- UV-resistant
Cover with socket (Swiss type 15), RAL 9010
Artikel-No.
9909.02.15
E-No
155990208
- Conforms to EN 60670-1
- UV-resistant
Cover with socket (Swiss type 25), RAL 9010
Artikel-No.
9909.02.25
E-No
155990508
- Conforms to EN 60670-1
- UV-resistant
Extension piece - 45mm - for junction box
Artikel-No.
9908.68.45
E-No
155992498
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
similar
Flush-mounted junction box - 145mm
Artikel-No.
9908.01.21
E-No
155110509
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction box - 150mm
Artikel-No.
9908.21
E-No
155010998
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction box - 76mm
Artikel-No.
9909.01
E-No
155010398
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction boxes for flexible plastic conduits (KRF or KRFG)
Dimensions / Form
- Product length:
- 115 mm
- Product width:
- 115 mm
- Product depth:
- 101 mm
Connections / Entries
- For conduit Ø:
- 20 mm, 25 mm
Assembly / Installation
- Assembly type:
- BB (solid construction)
Safety / Properties
- Special application:
- on-site mixed concrete
Push-on cover with diagonal support option, RAL 9010
Artikel-No.
9909.22
E-No
155910028
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with diagonal support option, RAL 7047
Artikel-No.
9909.22.65
E-No
155910138
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with diagonal support option, RAL 7012
Artikel-No.
9909.22.67
E-No
155910148
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with diagonal support option, RAL 9005
Artikel-No.
9909.22.60
E-No
155910158
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with insulated centre screw, RAL 9010
Artikel-No.
9909.22.37
E-No
155911028
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with insulated centre screw, RAL 7047
Artikel-No.
9909.22.37.65
E-No
155910238
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with insulated centre screw, RAL 7012
Artikel-No.
9909.22.37.67
E-No
155910248
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with insulated centre screw, RAL 9005
Artikel-No.
9909.22.37.60
E-No
155910258
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with diagonal support option, RAL 9010
Artikel-No.
9909.10
E-No
155910808
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with insulated centre screw, RAL 9010
Artikel-No.
9909.10.37
E-No
155911808
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Extension piece - 13mm - for junction box
Artikel-No.
9908.68
E-No
155992098
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
Push-on cover with central fixing, RAL 9010
Artikel-No.
9909.20
E-No
155910018
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Screwed-on cover with plastic screws, RAL 9010
Artikel-No.
9909.02
E-No
155910308
- Conforms to EN 60670-1
- UV-resistant
Screwed-on cover with metal screws, RAL 9010
Artikel-No.
9909.05
E-No
155910508
- Conforms to EN 60670-1
- UV-resistant
Push-on cover with corner fixing, RAL 9010
Artikel-No.
9909.12
E-No
155910408
- Conforms to EN 60670-1
- UV-resistant
Waterproof cover
Artikel-No.
9909.03
E-No
155900098
- with full neoprene seal
- Cover fixing with enclosed screws, non-rusting
Cover with socket (Swiss type 13), RAL 9010
Artikel-No.
9909.02.13
E-No
155990108
- Conforms to EN 60670-1
- UV-resistant
Cover with socket (Swiss type 23), RAL 9010
Artikel-No.
9909.02.23
E-No
155990408
- Conforms to EN 60670-1
- UV-resistant
Cover with socket (Swiss type 15), RAL 9010
Artikel-No.
9909.02.15
E-No
155990208
- Conforms to EN 60670-1
- UV-resistant
Cover with socket (Swiss type 25), RAL 9010
Artikel-No.
9909.02.25
E-No
155990508
- Conforms to EN 60670-1
- UV-resistant
Extension piece - 45mm - for junction box
Artikel-No.
9908.68.45
E-No
155992498
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
Flush-mounted junction box - 145mm
Artikel-No.
9908.01.21
E-No
155110509
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction box - 150mm
Artikel-No.
9908.21
E-No
155010998
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction box - 76mm
Artikel-No.
9909.01
E-No
155010398
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²