The Consolidation Box from Attema makes it possible to install ICT cabling in a flexible manner, because the installation is divided into two steps. The largest portion of the work takes place during the rough construction, at the same time as the other cabling is installed in the building. As a result, you only have to install a small portion of the ICT cabling during the finishing phase. The Consolidation Box complies with the installation standards of EIA/TIA 568A/B, ISO 11801 and NEN-EN 50173.
Consolidation Box
AK2 Data front part for max. 4 modules
Product length:
125 mm
Product width:
100 mm
Product depth:
60 mm
Halogen-free:
Yes
Shipping:
25
accessories
Adapter C, Keystone type
Artikel-No.
AT1976
- Adapter for mounting in the AK2-D lid of an RJ45 connector from 3M, Krone, Siemon, Radial and others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules, mounting cut-out: 19.4 x 14.9 mm
- suitable for Keystone modules from Rutenbeck, Metz Connect, Telegärtner, Digitus, 3M, and others
Blanking plug
Artikel-No.
AT1970
- Blind cover for sealing an open break-out port in the AK2-D cover after a change or a mistake.
- Blind cover for sealing an open break-out port in the Patch Cabinet after a change or a mistake.
- The blind cover is used to seal any opening behind the dust cap in the Universal Data Box.
- can be used in AK2 Data front parts
Adapter A, CommScope Systimax type
Artikel-No.
AT1972
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Avaya-Systimax (see selection table on the website).
- Version 'AL' has a label window for applying a coding strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules
- suitable for data modules from CommScope Systimax and others
Adapter B, 20.4 x 14.9 mm type
Artikel-No.
AT1974
- Adapter for mounting in the AK2-D lid of an RJ45 connector from AMP-Tyco, Brand-rex and Nexans, among others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules, mounting cut-out: 20.4 x 14.9 mm
- suitable for data modules from MP-Tyco, Brand-Rex and Nexans, and others
Adapter RM, Reichle & De-Massari type
Artikel-No.
AT1980
- Adapter for attachment of a Reichle & DeMassari RJ45 connector in the Universal Data Box, Patch Cabinet or the AK2-D cover.
- can be used in AK2 Data front parts
- for mounting RJ45 modules
- suitable for data modules from Reichle & De-Massari and others
Adapter L, LexCom type
Artikel-No.
AT1986
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules
- suitable for data modules from LexCom and others
Consolidation Box
Dimensions / Form
- Product length:
- 125 mm
- Product width:
- 100 mm
- Product depth:
- 60 mm
Safety / Properties
- Halogen-free:
- Yes
Approvals / Certifications
- VDE:
- Yes
Adapter C, Keystone type
Artikel-No.
AT1976
- Adapter for mounting in the AK2-D lid of an RJ45 connector from 3M, Krone, Siemon, Radial and others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules, mounting cut-out: 19.4 x 14.9 mm
- suitable for Keystone modules from Rutenbeck, Metz Connect, Telegärtner, Digitus, 3M, and others
Blanking plug
Artikel-No.
AT1970
- Blind cover for sealing an open break-out port in the AK2-D cover after a change or a mistake.
- Blind cover for sealing an open break-out port in the Patch Cabinet after a change or a mistake.
- The blind cover is used to seal any opening behind the dust cap in the Universal Data Box.
- can be used in AK2 Data front parts
Adapter A, CommScope Systimax type
Artikel-No.
AT1972
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Avaya-Systimax (see selection table on the website).
- Version 'AL' has a label window for applying a coding strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules
- suitable for data modules from CommScope Systimax and others
Adapter B, 20.4 x 14.9 mm type
Artikel-No.
AT1974
- Adapter for mounting in the AK2-D lid of an RJ45 connector from AMP-Tyco, Brand-rex and Nexans, among others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules, mounting cut-out: 20.4 x 14.9 mm
- suitable for data modules from MP-Tyco, Brand-Rex and Nexans, and others
Adapter RM, Reichle & De-Massari type
Artikel-No.
AT1980
- Adapter for attachment of a Reichle & DeMassari RJ45 connector in the Universal Data Box, Patch Cabinet or the AK2-D cover.
- can be used in AK2 Data front parts
- for mounting RJ45 modules
- suitable for data modules from Reichle & De-Massari and others
Adapter L, LexCom type
Artikel-No.
AT1986
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
- can be used in AK2 Data front parts
- for mounting RJ45 modules
- suitable for data modules from LexCom and others