- Compatible with Feller SNAPFIX®
- Glow wire tested at 850°C according to EN 60695-2-11
- For insulation ticknesses from 80 to 200 mm
- Combinations are possible
- To entries for tubes at the base
- A scale on the extension allows for precise adaption of the insulation without need of measuring
- Depth stop at the base of the box
- The box may be fixed from the front
Telescopic flush mounted box 1x1 for insulation thicknesses 80 - 200 mm
1 /
2
Telescopic flush mounted back box
Product length:
105 mm
Product width:
105 mm
For conduit Ø:
20 mm
Min. insulation thickness:
80 mm
Insulation thickness max.:
200 mm
Shipping:
10
accessories
Flush mounted back box for combinations with 1159-81
Artikel-No.
1159-82
E-No
372901609
- Compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
similar
Flush mounted back box for combinations with 1159-81
Artikel-No.
1159-82
E-No
372901609
- Compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Telescopic flush mounted box 1x1 for insulation thicknesses 80 - 200 mm
Installation
Installation
Dimensions / Form
- Product length:
- 105 mm
- Product width:
- 105 mm
Connections / Entries
- For conduit Ø:
- 20 mm
Assembly / Installation
- Min. insulation thickness:
- 80 mm
- Insulation thickness max.:
- 200 mm
Flush mounted back box for combinations with 1159-81
Artikel-No.
1159-82
E-No
372901609
- Compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Flush mounted back box for combinations with 1159-81
Artikel-No.
1159-82
E-No
372901609
- Compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm