Go back

Universal opening cutter

for manufacture of exact entry size
for low-voltage wiring of Ø 4 - 7.5 mm
for sheathed cabling up to 5 x 2.5 or 7 x 1.5
for cable NYY up to 5 x 2.5
for DIN EN conduits (flexible) with outer Ø of up to 20/25 mm
with 1/4" chuck size for battery-powered drills

Universal opening cutter for plastics

Kaiser GmbH & Co.KG

Artikel-No.: 1085-80

E-No: 983228469

EAN: 4013456251380

For openings: 4-22.5 mm

Shipping: 10

More product details

Datasheet (PDF)

Product Information

Universal opening cutter

Universal opening cutter for creating exact openings for cable and conduit entries in plastics. Creating exact openings for boxes and housings always results in exact air-tight, smoke-tight and concrete-tight entries.

For conduit and cable entries
For air-tight and smoke-tight openings
For strain-relieved openings
For all types of plastic

Examples of use

Use the universal opening cutter (Art. No. 1085-80) to cut the matching conical opening.

Details of suitable drill settings for the universal opening cutter in respect of cable sizes are shown in the table.

Make exact cable entries...

...with the universal opening cutter (Art. No. 1085-80).

Operation

Depending on the use, find the required diameter in the corresponding table and locate on tool.

Press snap-in button. Turn the handle and push to required position until the arrow point is visible in the opening. Turn handle back and click into place.

Push the point into the housing and cut out required opening by turning to the right.

TIP: To cut several openings or work with hard plastic, you can fit the opening cutter on the 1/4" bit of a battery-powered drill.

Assignment table for universal cavity wall opening cutter

Assignment table for universal concrete construction opening cutter

Technical Data

Features

For openings:: 4-22.5 mm