Company
Service
Media library
News
Contact
KAISER GROUP
Go back
UP¹ Flush-mounting boxes
- Side-neutral combination - Many through-wiring possibilities - With 4 x 3 screw domes and 2 expanding claw fields - Standardised combination distance 71 mm
Open Cadenas Modal
  • Side-neutral combination
  • Many through-wiring possibilities
  • With 4 x 3 screw domes and 2 expanding claw fields
  • Standardised combination distance 71 mm

One-gang junction box for flush-mounting/masonry installation, flush-mounting box, designed as a flush-mounting device junction box in accordance with DIN EN 60670/VDE 0606 and DIN 49073, made of plastic.
Installation opening Ø 60 mm, installation opening Ø 82 mm, depth 66 mm, combination distance 71 mm, protection class IP 20 according to DIN EN 60529, flame retardant according to DIN EN 60695 up to 650° C, halogen-free according to DIN VDE 0604-2-100, for flush-mounting installation,
Entries with break-out openings for electric cables and DIN EN conduits with a diameter of 20/25 mm (2x 20 mm/25 mm and 2x up to 11 mm in the combination area, 8 x 20 mm/25 mm in the side wall, 1 x 20 mm/25 mm and 1x up to 11 mm in the box base).
Open through-wiring, fully insulated through-wiring near the bottom, with 4 x 3 screw domes and 2 expanding claw fields, with 2 device screws
Read more Read less

One-gang junction box UP¹ with device screws

Kaiser GmbH & Co.KG
Article No.: 1556-05
EAN: 4013456594029
Halogen-free
VDE
Environmental Declarations
Product depth: 66 mm
For conduit Ø: 20 mm, 25 mm
Wire entry Ø max.: 11 mm
Halogen-free: Yes
Environmental Declarations: SHI-Produktpass 15286-10-1000
Packaging / Shipping: 25 / 250
More product details
Datasheet (PDF)

accessories

- to compensate for deep-seated boxes - To maintain IP protection class - With 2 screwed-in device screws - with 2 ring attachment screws
Plaster compensation ring Ø 60 mm, height 12 mm
Article No. 1155-63
  • to compensate for deep-seated boxes
  • To maintain IP protection class
  • With 2 screwed-in device screws
  • with 2 ring attachment screws
See more

recommendations

- Side-neutral combination - Many through-wiring possibilities - With 4 x 3 screw domes - Standardised combination distance 71 mm
One-gang box UP¹ with device srews
Article No. 1056-05
  • Side-neutral combination
  • Many through-wiring possibilities
  • With 4 x 3 screw domes
  • Standardised combination distance 71 mm
See more
- Side-neutral combination - Many through-wiring possibilities - Standardised combination distance 71 mm
Electronics box UP¹
Article No. 1068-05
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more
- Side-neutral combination - Many through-wiring possibilities - Standardised combination distance 71 mm
Two-gang junction box UP¹
Article No. 1656-05
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more

UP¹ Flush-mounting boxes

UP¹, the new flush-mounted range for electrical installations, takes installation to a whole new level and makes it easier than ever before. The tried-and-tested standard flush-mounted box has been updated and now boasts many new, practical features.
  • Side-neutral combination
  • Many through-wiring possibilities
  • With 4 x 3 screw domes and 2 expanding claw fields
  • Standardised combination distance 71 mm

Secure connection with the new side-neutral combination

The audibly secure connection with the KAISER combination: simply connect the boxes to each other – in any alignment – and press them together with a distinct ‘click’. This creates a stable combination with a standardised distance of 71 mm.
No matter which way the boxes meet...
No matter which way the boxes meet...
...put them together...
...put them together...
...and the boxes lock together stably.
...and the boxes lock together stably.
Stable and side-neutral combination in 71 mm standardised combination distance.
Stable and side-neutral combination in 71 mm standardised combination distance.

Processing instructions – Entries

Due to entries being close to the base, the cable can be stowed directly on the base and take up little space.
Due to entries being close to the base, the cable can be stowed directly on the base and take up little space.
Maximum usable space, thanks through-wiring close to the base.
Maximum usable space, thanks through-wiring close to the base.
Maximum flexibility thanks to three feeds up to M25 from one direction...
Maximum flexibility thanks to three feeds up to M25 from one direction...
...e.g. next to door openings.
...e.g. next to door openings.

Processing instructions - Combination after plastering

Devices can be connected in four different ways:
Devices can be connected in four different ways:
...classic connection in the middle area of the one-gang junction box...
...classic connection in the middle area of the one-gang junction box...
...or by the fully insulated connection close to the base in the one-gang junction boxes,...
...or by the fully insulated connection close to the base in the one-gang junction boxes,...
...without routing the cable in bends from one box to the other.
...without routing the cable in bends from one box to the other.
Moreover, in the case of permanently installed boxes, it is possible to break out the separator wall between the combined boxes in the upper area simply with a pair of combination pliers by means of a tilting movement...
Moreover, in the case of permanently installed boxes, it is possible to break out the separator wall between the combined boxes in the upper area simply with a pair of combination pliers by means of a tilting movement...
...furthermore, the underlying electric cable/conduit entry can also be removed to provide even more wiring space.
...furthermore, the underlying electric cable/conduit entry can also be removed to provide even more wiring space.
This makes it possible to insert the connecting cables of pre-wired accessories, such as sockets, quickly and easily without having to connect them in the sockets first.
This makes it possible to insert the connecting cables of pre-wired accessories, such as sockets, quickly and easily without having to connect them in the sockets first.
All UP¹ one-gang boxes offer generous installation space for convenient accommodation of cables, connection terminals and installation accessories.
All UP¹ one-gang boxes offer generous installation space for convenient accommodation of cables, connection terminals and installation accessories.

Electrical installation

After plastering, the signal bristles indicate the position of the boxes.
After plastering, the signal bristles indicate the position of the boxes.
Opening the boxes with a blow of the hammer.
Opening the boxes with a blow of the hammer.
Device mounting using: expanding claws or...
Device mounting using: expanding claws or...
...device screws into the 4 x 3 screw domes for maximum flexibility.
...device screws into the 4 x 3 screw domes for maximum flexibility.

Assembly and connection option with distance support

Position the distance support on the box...
Position the distance support on the box...
...and create a box combination with a 91 mm spacing.
...and create a box combination with a 91 mm spacing.
The distance support (Art. No. 1159-35) guarantees a precise and secure distance of 91 mm.
The distance support (Art. No. 1159-35) guarantees a precise and secure distance of 91 mm.
Example of installation with a 91-mm spacing.
Example of installation with a 91-mm spacing.

Dimensions / Form

Product depth:
66 mm

Connections / Entries

For conduit Ø:
20 mm, 25 mm
Wire entry Ø max.:
11 mm

Assembly / Installation

Assembly type:
UP (solid construction)

Safety / Properties

Halogen-free:
Yes

Features

Number of screw domes:
4 x 3

Approvals / Certifications

VDE:
Yes
Environmental Declarations:
SHI-Produktpass 15286-10-1000
- to compensate for deep-seated boxes - To maintain IP protection class - With 2 screwed-in device screws - with 2 ring attachment screws
Plaster compensation ring Ø 60 mm, height 12 mm
Article No. 1155-63
  • to compensate for deep-seated boxes
  • To maintain IP protection class
  • With 2 screwed-in device screws
  • with 2 ring attachment screws
See more
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
- Side-neutral combination - Many through-wiring possibilities - With 4 x 3 screw domes - Standardised combination distance 71 mm
One-gang box UP¹ with device srews
Article No. 1056-05
  • Side-neutral combination
  • Many through-wiring possibilities
  • With 4 x 3 screw domes
  • Standardised combination distance 71 mm
See more
- Side-neutral combination - Many through-wiring possibilities - Standardised combination distance 71 mm
Electronics box UP¹
Article No. 1068-05
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more
- Side-neutral combination - Many through-wiring possibilities - Standardised combination distance 71 mm
Two-gang junction box UP¹
Article No. 1656-05
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more