Electronics box UP¹ and Two-gang junction box UP¹

- Side-neutral combination
- Many through-wiring possibilities
- Standardised combination distance 71 mm

1 / 2

Side-neutral combination
Many through-wiring possibilities
Standardised combination distance 71 mm

two-gang junction box, for Flush-mounting/masonry installation, flush-mounting box, designed as a Flush-mounting two-gang junction box in accordance with DIN EN 60670/VDE 0606 and DIN 49073, made of plastic.
Installation opening 2x Ø 60 mm, installation opening 152 mm x 82 mm, depth 68 mm, combination distance 71 mm, protection class IP 20 according to DIN EN 60529, flame retardant according to DIN EN 60695 up to 650° C, halogen-free according to DIN VDE 0604-2-100, for flush-mounting installation.
Entries with break-out openings for electric cables and EN conduits with diameters of 20/25 and 25/32 mm (3x 20 mm/25 mm and 3x up to 11 mm in the combination area, 3 x 20 mm/25 mm and 2x 25 mm/32 mm in the side wall, 2 x 20 mm/25 mm and 4x up to 11 mm in the box base),
open through-wiring, fully insulated through-wiring close to the base, with 6 x 3 screw domes, with 4 device screws

Two-gang junction box UP¹

Kaiser GmbH & Co.KG

Article No.: 1656-05

EAN: 4013456594289

Product width: 80 mm

Product depth: 68 mm

Product length: 149 mm

For conduit Ø: 20 mm, 25 mm

Wire entry Ø max.: 11 mm

Drill/cut hole Ø: 2x82 mm

Halogen-free: Yes

Environmental Declarations: SHI-Produktpass 15286-10-1000

Packaging / Shipping: 10 / 100

More product details

Datasheet (PDF)

accessories

- to compensate for deep-seated boxes
- To maintain IP protection class
- With 2 screwed-in device screws
- with 2 ring attachment screws

Plaster compensation ring Ø 60 mm, height 12 mm

Article No. 1155-63

to compensate for deep-seated boxes
To maintain IP protection class
With 2 screwed-in device screws
with 2 ring attachment screws

recommendations

Electronics box UP¹

Article No. 1068-05

Side-neutral combination
Many through-wiring possibilities
Standardised combination distance 71 mm

- Side-neutral combination
- Many through-wiring possibilities
- With 4 x 3 screw domes
- Standardised combination distance 71 mm

One-gang box UP¹ with device srews

Article No. 1056-05

Side-neutral combination
Many through-wiring possibilities
With 4 x 3 screw domes
Standardised combination distance 71 mm

- Side-neutral combination
- Many through-wiring possibilities
- With 4 x 3 screw domes and 2 expanding claw fields
- Standardised combination distance 71 mm

One-gang junction box UP¹ with device screws

Article No. 1556-05

Side-neutral combination
Many through-wiring possibilities
With 4 x 3 screw domes and 2 expanding claw fields
Standardised combination distance 71 mm

similar

Electronics box UP¹

Article No. 1068-05

Side-neutral combination
Many through-wiring possibilities
Standardised combination distance 71 mm

Product Information

Electronics box UP¹ and Two-gang junction box UP¹

The electronics box UP¹ and two-gang junction UP¹ box offer generous device installation space and additional installation space for accommodating small switch actuators, for example. The associated separator enables standardised installation of bus and operating voltage in one box.

Side-neutral combination
Many through-wiring possibilities
Standardised combination distance 71 mm

Verarbeitungshinweise / Anwendungsbeispiele Electronic- und Doppel-Geräte-Verbindungsdose

Two combination entries up to M25/M32 enable the Insertion of pre-assembled Electric cables with connectors such as HDMI.

By inserting the separator, two different voltage types can be standardised in the electronics box. It also offers generous installation space.

Thanks to the electronics box, it is easy to install radio-controlled actuators, etc., without putting excessive strain on cables or accessories.

Network connection boxes can be used while maintaining the cable bending radii and with the best possible data transfer speeds.

Thanks to its large Installation opening without a central bridge, the two-gang Junction box allows…

…the use of pre-wired accessories, block inserts, and many more.

Double-row combination with the two-gang Junction box (Art. No. 1656-05) and one-gang junction boxes (Art.No. 1556-05) with distance supports (Art. No. 1159-35)...

...for an optimal Installation image (6 side by side).

Technical Data

Dimensions / Form

Product width:: 80 mm
Product depth:: 68 mm
Product length:: 149 mm
Drill/cut hole Ø:: 2x82 mm

Connections / Entries

For conduit Ø:: 20 mm, 25 mm
Wire entry Ø max.:: 11 mm

Assembly / Installation

Assembly type:: UP (solid construction)

Safety / Properties

Halogen-free:: Yes

Features

Number of screw domes:: 4 x 3

Approvals / Certifications

VDE:: Yes
Environmental Declarations:: SHI-Produktpass 15286-10-1000

Accessories

Plaster compensation ring Ø 60 mm, height 12 mm

Article No. 1155-63

to compensate for deep-seated boxes
To maintain IP protection class
With 2 screwed-in device screws
with 2 ring attachment screws

Tools

Planning Data

PARTcommunity

Planning Data (CAD/3D/2D)

Product Recommendations

Electronics box UP¹

Article No. 1068-05

Side-neutral combination
Many through-wiring possibilities
Standardised combination distance 71 mm

One-gang box UP¹ with device srews

Article No. 1056-05

Side-neutral combination
Many through-wiring possibilities
With 4 x 3 screw domes
Standardised combination distance 71 mm

One-gang junction box UP¹ with device screws

Article No. 1556-05

Side-neutral combination
Many through-wiring possibilities
With 4 x 3 screw domes and 2 expanding claw fields
Standardised combination distance 71 mm

Two-gang junction box UP¹

Product Information

Electronics box UP¹ and Two-gang junction box UP¹

Verarbeitungshinweise / Anwendungsbeispiele Electronic- und Doppel-Geräte-Verbindungsdose

Technical Data

Dimensions / Form

Connections / Entries

Assembly / Installation

Safety / Properties

Features

Approvals / Certifications

Accessories

Tools

Planning Data

PARTcommunity

Product Recommendations

Similar Products