Company
Service
Media library
News
Careers
Contact
KAISER GROUP
Go back
Fire protection cavity wall box
- Compatible with Feller SNAPFIX® - for F30-F90 or EI30-EI90 fire-protection walls - For timber stud walls F30-F90 or EI30-EI90 - VKF approval 21042 - also for opposing installation - for plate thickness > 10 - 40 mm - matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10 - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Open Cadenas Modal
  • Compatible with Feller SNAPFIX®
  • for F30-F90 or EI30-EI90 fire-protection walls
  • For timber stud walls F30-F90 or EI30-EI90
  • VKF approval 21042
  • also for opposing installation
  • for plate thickness > 10 - 40 mm
  • matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm

Quickbox ® HWD 90 1x1 for Swiss device inserts
Fire protection box for cavity walls, designed as a one-gang junction box in accordance with EN 1363-1 and EN 1364-1, made of plastic, for fire protection walls EI30-EI90, VKF approval 21042, glow wire resistance 850° C, for Swiss device inserts, maintains the sound insulation function of the wall, for opposing installation, IP30
Combination 1x1, cut hole Ø 83 mm, length 83 mm, width 83 mm, depth 50 mm, for panel thickness >10-40 mm, with 2 screw domes and 2 plus-minus device screws, for device screws Ø 3 mm, max. tightening torque 0.5 Nm
Read more Read less

Quickbox® HWD 90 1x1

Kaiser GmbH & Co.KG
Artikel-No.: 9498-77
E-No: 155012029
EAN: 4013456536425
SZ
CE
Feller SNAPFIX compact
Product Ø: 83 mm
Product length: 83 mm
Product width: 83 mm
Product depth: 50 mm
Installation opening (wall/ceiling) Ø: 83 mm
Drill/cut hole Ø: 83 mm
fire resistance class: EI 30, EI 90
Packaging / Shipping: 10 / 100
More product details
Datasheet (PDF)

tools

Universal opening cutter for plastics
Universal opening cutter for plastics
Artikel-No. 1085-80
E-No 983228469
  • for manufacture of exact entry size
  • for low-voltage wiring of Ø 4 - 7.5 mm
  • for sheathed cabling up to 5 x 2.5 or 7 x 1.5
  • for cable NYY up to 5 x 2.5
  • for DIN EN conduits (flexible) with outer Ø of up to 20/25 mm
  • with 1/4" chuck size for battery-powered drills
See more

similar

- Compatible with Feller SNAPFIX® - for F30-F90 or EI30-EI90 fire-protection walls - For timber stud walls F30-F90 or EI30-EI90 - VKF approval 21042 - also for opposing installation - for plate thickness > 10 - 40 mm - matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10 - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Quickbox® HWD 90 2x1
Artikel-No. 9498-77.02
E-No 155013029
  • Compatible with Feller SNAPFIX®
  • for F30-F90 or EI30-EI90 fire-protection walls
  • For timber stud walls F30-F90 or EI30-EI90
  • VKF approval 21042
  • also for opposing installation
  • for plate thickness > 10 - 40 mm
  • matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - for F30-F90 or EI30-EI90 fire-protection walls - For timber stud walls F30-F90 or EI30-EI90 - VKF approval 21042 - also for opposing installation - for plate thickness > 10 - 40 mm - matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10 - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Quickbox® HWD 90 3x1
Artikel-No. 9498-77.03
E-No 155014029
  • Compatible with Feller SNAPFIX®
  • for F30-F90 or EI30-EI90 fire-protection walls
  • For timber stud walls F30-F90 or EI30-EI90
  • VKF approval 21042
  • also for opposing installation
  • for plate thickness > 10 - 40 mm
  • matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more

Fire protection cavity wall box

HWD 90 cavity wall boxes for EI30-EI90 fire-protection walls ensure certified and fire-protection compliant electrical installation. Intelligent AFS technology reacts immediately to fire and heat and automatically seals the installation opening. This guarantees the fire resistance class of the fire-protection wall and secures escape routes. Use in all fire-protection walls and the fire-resistance duration of up to 90 minutes ensures maximum flexibility, even when the planning is changed. At the same time, it also maintains the wall's sound insulation requirements.
  • Compatible with Feller SNAPFIX®
  • For fire-protection walls F30-F90 or EI30-EI90
  • For timber stud walls F30-F90 or EI30-EI90
  • Maintains the wall's sound insulation protection
  • Retrofitting also possible
  • With fire-protection cover, can be used as a junction box
  • Also for directly opposing installation
  • May not be used inside encapsulated walls

Processing note

Final assembly of certain flush-mounted devices for unplastered surfaces:
Due to the contact edge of the box, a small joint may form between the cover and the wall surface.
If the surface is not plastered, it is advisable to countersink the edge of the box holder into the wall to avoid any joints.

Installation of Quickbox HWD 90 in fire protection walls EI30 - EI90

Cut a circular installation opening Ø 83 mm using a circular drill bit (e.g. AGRO Basic Cutter Art.-No. 1084-83).
Cut a circular installation opening Ø 83 mm using a circular drill bit (e.g. AGRO Basic Cutter Art.-No. 1084-83).
Create precisely fitting cable entries.
Create precisely fitting cable entries.
Only the cable is to be inserted into the cavity wall box!
Only the cable is to be inserted into the cavity wall box!
Place the cavity wall box in the installation opening and ensure it is properly aligned.
Place the cavity wall box in the installation opening and ensure it is properly aligned.
Secure the cavity wall box using the two pre-fitted FX4 screws.
Secure the cavity wall box using the two pre-fitted FX4 screws.
Install the appliance in the standard way.
Install the appliance in the standard way.

Dimensions / Form

Product Ø:
83 mm
Product length:
83 mm
Product width:
83 mm
Product depth:
50 mm
Installation opening (wall/ceiling) Ø:
83 mm
Drill/cut hole Ø:
83 mm

Assembly / Installation

Assembly type:
HW (drywall/lightweight construction)

Safety / Properties

Special application:
Fire protection

Approvals / Certifications

fire resistance class:
EI 30, EI 90
Certificate

VKF approval Quickbox HWD 90

121.3 KB | 05/09/2024
Certificate

Test report in short form 9498-77.XX HWD90

5.3 MB | 17/08/2021
Download
Instruction

Assembly instructions fire protection and sound insulation boxes.

Instructions available in German and French.

5.7 MB | 11/10/2022
Instruction

Fire-stop box Quickbox HWD90.

Fire-stop box Quickbox HWD 90 for electrical installations in fire-protection walls EI 30 - EI 90.

For installations with cables.

887.3 KB | 24/01/2020
Download
Fire protection.
Brochure

Fire protection.

Box, housing and sealing systems for fire-protection walls and ceilings.

21.1 MB
Universal opening cutter for plastics
Universal opening cutter for plastics
Artikel-No. 1085-80
E-No 983228469
  • for manufacture of exact entry size
  • for low-voltage wiring of Ø 4 - 7.5 mm
  • for sheathed cabling up to 5 x 2.5 or 7 x 1.5
  • for cable NYY up to 5 x 2.5
  • for DIN EN conduits (flexible) with outer Ø of up to 20/25 mm
  • with 1/4" chuck size for battery-powered drills
See more
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
- Compatible with Feller SNAPFIX® - for F30-F90 or EI30-EI90 fire-protection walls - For timber stud walls F30-F90 or EI30-EI90 - VKF approval 21042 - also for opposing installation - for plate thickness > 10 - 40 mm - matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10 - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Quickbox® HWD 90 2x1
Artikel-No. 9498-77.02
E-No 155013029
  • Compatible with Feller SNAPFIX®
  • for F30-F90 or EI30-EI90 fire-protection walls
  • For timber stud walls F30-F90 or EI30-EI90
  • VKF approval 21042
  • also for opposing installation
  • for plate thickness > 10 - 40 mm
  • matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more
- Compatible with Feller SNAPFIX® - for F30-F90 or EI30-EI90 fire-protection walls - For timber stud walls F30-F90 or EI30-EI90 - VKF approval 21042 - also for opposing installation - for plate thickness > 10 - 40 mm - matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10 - For device screws Ø 3 mm - Max. tightening torque 0.5 Nm
Quickbox® HWD 90 3x1
Artikel-No. 9498-77.03
E-No 155014029
  • Compatible with Feller SNAPFIX®
  • for F30-F90 or EI30-EI90 fire-protection walls
  • For timber stud walls F30-F90 or EI30-EI90
  • VKF approval 21042
  • also for opposing installation
  • for plate thickness > 10 - 40 mm
  • matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
See more