Flush-mounted boxes U40/U50/UD50
Renewed Flush-mounted boxes: immediately wall-mounted (drill hole of Ø 82 mm)
To increase the installer's ease of use, the U-flush-mounted boxes have been renewed. Thanks to the very good clamping fastening, the boxes are immediately stuck in plaster blocks, aerated concrete and sand-lime brick.
One clamping solution for every brick wall
More and more clamping installation is being done, but especially with sand-lime brick the clamping was less and quick plaster still had to be used. This means an extra job and extra costs. The new flush-mounted boxes from Attema are immediately secured to the wall: in plaster blocks, aerated concrete and sand-lime brick. That makes a world of difference.
View the products
U40 Junction box Self-fixating
Article number:
AT1112.01
- Removable, flexible abdominal spout.
- Drill-hole Ø 82 mm.
- Suitable for conduit 16, 19 and 20 mm.
- Fastening screws M3 x 20 mm.
- 360º degree rotating ring.
- Halogen-free.
U40 Junction box Self-fixating
Article number:
AT1222.01
- Removable, flexible abdominal spout.
- Drill-hole Ø 82 mm.
- Suitable for conduit 16, 19 and 20 mm.
- Fastening screws M3 x 20 mm.
- 360º degree rotating ring.
- Halogen-free.
U50 Junction box Self-fixating
Article number:
AT1102.01
- Removable, flexible abdominal spout.
- Drill-hole Ø 82 mm.
- Suitable for conduit 16, 19 and 20 mm.
- Fastening screws M3 x 20 mm.
- 360º degree rotating ring.
- Halogen-free.
U50 Junction box Self-fixating
Article number:
AT1224.01
- Removable, flexible abdominal spout.
- Drill-hole Ø 82 mm.
- Suitable for conduit 16, 19 and 20 mm.
- Fastening screws M3 x 20 mm.
- 360º degree rotating ring.
- Halogen-free.
Conduit entry, single, multi-diameter 16/19/20 mm U40/U50 (50x10)
Article number:
AT4065.01
- Suitable for conduit 16, 19 and 20 mm.
- Halogen-free.
Conduit entry, dual, multi-diameter 16/19/20 mm U40/U50
Article number:
AT4067.01
- Combi tube entry, applicable on U40, U50 and UD50.
- Suitable for conduit 16, 19 and 20 mm.
- Halogen-free.