P25 Trunking System now also available in trendy black!
Strikingly subtle: P25 in black
Attema introduces the complete P25 range in trendy black! The well-known P25 trunking and corresponding accessories are now also available in black, in addition to white and cream.
ZC25 Double socket in black (RAL 9005)
The P25 cable trunking is easy to expand with matching surface-mounted products, now also available in black. All products have compact dimensions, fit perfectly with the P25 trunking, and are KEMA-certified. The black ZC25 2-gang socket outlet also fits seamlessly with the P25 trunking – click the button below for more information.
Discover the complete P25 range from Attema
P25 Trunking base + cover, 2 m black
Article number:
AT9264
- Quick installation due to attachment holes in 'double' bottom.
- Alignment correction possible thanks to slot and hole pattern in bottom.
- Internal dimensions: 23 x 8 mm
ZC25 Double socket black (RAL 9005)
Article number:
AT5581
- 2-pin with rim earthing.
- 16A / 250V with plug-in contacts for solid conductors.
- Consists of base plate with pre-assembled element, cover and mounting hardware.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
WS25 Two-way switch black (RAL 9005)
Article number:
AT5578
- 10A / 250V with plug-in contacts for solid conductors.
- Consists of base plate with pre-assembled element, cover, rocker operation and mounting hardware.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
ME25 Mounting plate black (RAL 9005)
Article number:
AT5503
- Equipped with 2 brass bushes M4.
- Suitable for simplex surface-mount domestic switching devices.
MS25 Mounting plate black (RAL 9005)
Article number:
AT5521
- Equipped with 6 brass bushes M4.
- Suitable for dual mounting of simplex surface-mount domestic switching devices.
FW25 Flat bend black (RAL 9005)
Article number:
AT5663
- Includes guide piece with radius protection for ICT cabling (UTP, FTP and STP).
- Attachment to K25/P25/Z25 conduit using click connection.
- Overlaps the cover 5 mm. It is unnecessary to cut the cover perfectly square at exactly the right length.
AE25 Outside corner black (RAL 9005)
Article number:
AT5681
- With guide piece.
- Attachment to K25/P25/Z25 conduit using click connection.
- Overlaps the cover 5 mm. It is unnecessary to cut the cover perfectly square at exactly the right length.
RK25 Wall-ceiling transition black (RAL 9005)
Article number:
AT11971
- Attachment to K25/P25/Z25 conduit using click connection.
- Includes screw hole on one side for attachment to ceiling, floor etc.
- Overlaps the cover 5 mm. It is unnecessary to cut the cover perfectly square at exactly the right length.
VM25 Reducing sleeve 16 mm black (RAL 9005)
Article number:
AT5561
- Suitable for transition from 16 mm conduit to K25/P25/Z25 raceway duct.
- Attachment to K25/P25/Z25 conduit using click connection.
VM25 Reducing sleeve 19 mm black (RAL 9005)
Article number:
AT5571
- Suitable for transition from 19 mm conduit to K25/P25/Z25 raceway duct.
- Attachment to K25/P25/Z25 conduit using click connection.