Lighting and loudspeaker housings
The right installation housings for presentation and meeting rooms
Lighting, loudspeakers, sensors and audiovisual equipment must be integrated safely and accurately into ceilings and walls. ATTEMA offers a comprehensive range of installation housings for concrete, solid ceilings and insulated hollow ceilings.
Our innovative systems provide sufficient installation space, protect surrounding materials and support fast and reliable installation. This allows you to create a professional result without compromising safety, appearance or flexibility.
HaloX® system for in-situ concrete
A flexible installation solution for luminaires and loudspeakers in concrete
With the ATTEMA HaloX® system, luminaires and loudspeakers can be integrated easily into concrete ceilings and walls. The housings provide space for LED lighting, halogen lighting, ceiling loudspeakers and the associated drivers, transformers and connection components.
- Toolless combination entry for 20/25 mm conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside
- Toolless combination entry for 20/25 mm conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside
- Toolless combination entry for 20/25 mm conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside
- Toolless combination entry for 20/25 mm conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside
- No reinforcement cuts in tunnel section area
- Toolless combination entry for 20/25 mm conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside
- No reinforcement cuts in tunnel section area
- Toolless combination entry for 20/25 mm conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside
- No reinforcement cuts in tunnel section area
HaloX® for solid ceilings
Fast and reliable retrofitting of luminaires, LED lighting and loudspeakers in concrete
HaloX® for solid ceilings makes it easy to install luminaires, LED lighting and loudspeakers retrospectively in existing precast ceilings and solid concrete slabs.
It is ideal when an additional lighting point, loudspeaker or other recessed ceiling component is required in a completed concrete structure. The HaloX® 100 installation system has been developed for fast and safe installation in concrete.
Robust click connections support efficient installation on site while minimising the impact on the concrete structure. A core-drilled opening of Ø 150–160 mm is sufficient to install the housing.
With installation openings of up to Ø 100 mm, the system provides considerable freedom when selecting luminaires, LED spotlights and loudspeakers. Where additional installation depth is required, the available space can be increased using the appropriate extension rings.
HaloX® is designed to withstand demanding site conditions and provide reliable long-term performance in solid concrete structures.
- for retrofitting in solid ceilings
- required hole size Ø 150-160 mm
- Take into consideration the ceiling thickness - at least 3 cm concrete cover is needed on top of the box
- suitable for front parts with Art. No. 1281-XX
- for retrofitting of HaloX®-O housings into slab ceilings
- required hole size Ø 150-160 mm
ThermoX® LED for insulated hollow ceilings
Airtight installation space for recessed LED luminaires
The ThermoX® LED installation housing enables fixed and adjustable recessed LED luminaires to be installed safely and airtight in different ceiling constructions.
The housing has been developed specifically for insulated hollow ceilings and prevents uncontrolled air movement between the room and the ceiling void. ThermoX® LED protects surrounding materials, including vapour-control membranes, insulation and ceiling finishes, against high operating temperatures.
This creates a safe, durable and airtight installation. It helps reduce energy loss and lowers the risk of long-term damage, including moisture problems and mould growth in the ceiling insulation.
The housing can be installed retrospectively from below. Its tool-free installation method enables fast, clean and efficient working. The surface structure on the rear supports effective thermal management, while the luminaire remains securely fixed inside the housing.
- for rigid and pivoting LED luminaires
- circumferential airtight sealing lip
- Swivel trough for alignment of the luminaire
- for rigid and pivoting LED luminaires
- circumferential airtight sealing lip
- Swivel trough for alignment of the luminaire
- for rigid and pivoting LED luminaires
- circumferential airtight sealing lip
- Swivel trough for alignment of the luminaire
- for rigid and pivoting LED luminaires
- circumferential airtight sealing lip
- Swivel trough for alignment of the luminaire
ThermoX® for heat-generating light sources
Safe installation space for halogen and LED lighting in insulated ceilings
- for halogen luminaires and pivoting LED luminaires
- max. installation height for low-voltage luminaire 65 mm, HV luminaire 70 mm
- Heat distortion resistant to 220°C
- lamp wattage LV: max. 35 W with AL reflector / 20 W Cool-Beam
- lamp wattage for HV luminaires max. 35 W with AL reflector (socket GU 10)
- max. LED lamp output 6.6 W
- Front can be used on both sides
- saves time - no plastering; close joint gap if necessary
- ceiling exit (CE) up to Ø 86 mm possible
- Heat distortion resistant to 220°C
- max. installation height for low-voltage luminaire 65 mm, HV luminaire 70 mm
- lamp wattage LV: max. 35 W with AL reflector / 20 W Cool-Beam
- lamp power for HV luminaires max. 35 W with AL reflector (base GU 10) /20 W Cool-Beam
- max. LED lamp output 6.6 W
- for retrofitting or as spare part
- Universal front ring
- metal with galvanised or powder coating
- only for interiors
- minimum diameter of the luminaire 79 mm with ceiling exit Ø 68 and 75 mm
- Minimum diameter of luminaire covering 86 mm with ceiling exit Ø 82 mm
- metal with galvanised or powder coating
- only for interiors
- minimum diameter of the luminaire 79 mm with ceiling exit Ø 68 and 75 mm
- Minimum diameter of luminaire covering 86 mm with ceiling exit Ø 82 mm
- metal with galvanised or powder coating
- only for interiors
- minimum diameter of the luminaire 79 mm with ceiling exit Ø 68 and 75 mm
- Minimum diameter of luminaire covering 86 mm with ceiling exit Ø 82 mm
HaloX® for voice alarm loudspeakers
Spacious installation housing for voice alarm systems
For installers working on voice alarm systems and fire-safety projects, providing sufficient installation space can be challenging. The ATTEMA HaloX® 250 offers a practical solution thanks to its large diameter and generous internal volume. It has the largest installation diameter within the HaloX® range and is therefore particularly suitable for larger ceiling components such as loudspeakers, sensors and specialist luminaires. When combined with the optional tunnel version, additional space is created for cabling, transformers and other installation components.
