Coupler F25KG white (RAL 9010)
Article number:
AT5622
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Coupler F25KG cream (RAL 1013)
Article number:
AT5602
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Coupler F25KG cream (RAL 1013), LSZH
Article number:
AT5692
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
End piece F25E white (RAL 9010)
Article number:
AT5623
- Mounting strip with screw hole to prevent movement.
- The mounting strip can be broken off to allow close-fitting installation in a corner.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collar under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
End piece F25E cream (RAL 1013)
Article number:
AT5603
- Mounting strip with screw hole to prevent movement.
- The mounting strip can be broken off to allow close-fitting installation in a corner.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collar under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
End piece F25E cream (RAL 1013), LSZH
Article number:
AT5693
- Mounting strip with screw hole to prevent movement.
- The mounting strip can be broken off to allow close-fitting installation in a corner.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collar under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Flat corner F25FW white (RAL 9010)
Article number:
AT5624
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Flat corner F25FW cream (RAL 1013)
Article number:
AT5604
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Flat corner F25FW cream (RAL 1013), LSZH
Article number:
AT5694
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Tee/branch connector F25T white (RAL 9010)
Article number:
AT5625
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- For use as branch connector to two sides by breaking out the straight-through port in the middle of the guide piece and cover.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Tee/branch connector F25T cream (RAL 1013)
Article number:
AT5605
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- For use as branch connector to two sides by breaking out the straight-through port in the middle of the guide piece and cover.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Tee/branch connector F25T cream (RAL 1013), LSZH
Article number:
AT5695
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- For use as branch connector to two sides by breaking out the straight-through port in the middle of the guide piece and cover.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Inner corner F25IE white (RAL 9010)
Article number:
AT5626
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Inner corner F25IE cream (RAL 1013)
Article number:
AT5606
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Inner corner F25IE cream (RAL 1013), LSZH
Article number:
AT5696
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Outside corner F25AE white (RAL 9010)
Article number:
AT5627
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Outside corner F25AE cream (RAL 1013)
Article number:
AT5607
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Outside corner F25AE cream (RAL 1013), LSZH
Article number:
AT5697
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Reducing sleeve, 16mm conduit F25V16 white (RAL 9010)
Article number:
AT5628
- Suitable for transition from 16 mm conduit to Z25 / F25 raceway duct.
- Temporary mounting using click attachment to Z25 / F25 raceway and conduit. Definitive mounting by means of retaining collar under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Reducing sleeve, 16mm conduit F25V16 cream (RAL 1013)
Article number:
AT5608
- Suitable for transition from 16 mm conduit to Z25 / F25 raceway duct.
- Temporary mounting using click attachment to Z25 / F25 raceway and conduit. Definitive mounting by means of retaining collar under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Reducing sleeve, 16mm conduit F25V16 cream (RAL 1013), LSZH
Article number:
AT5698
- Suitable for transition from 16 mm conduit to Z25 / F25 raceway duct.
- Temporary mounting using click attachment to Z25 / F25 raceway and conduit. Definitive mounting by means of retaining collar under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Reducing sleeve, 19-20mm conduit F25V20 white (RAL 9010)
Article number:
AT5629
- Suitable for transition from 16 mm conduit to Z25 / F25 raceway duct.
- Temporary mounting using click attachment to Z25 / F25 raceway and conduit. Definitive mounting by means of retaining collar under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.