CD80R Kitvast junction box with tape Ø 16/19 mm
Article number:
AT1037
- Applicable in wide slab floors and on tunnel formwork.
- Distance from underside of pipe entries to underside of the box: 60 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Fitted with adhesive lid.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
CD100R Kitvast junction box with tape Ø 16/19 mm
Article number:
AT1039
- Applicable in wide slab floors and on tunnel formwork.
- Distance from the bottom of the conduit entry to the open side of the box: 80 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Fitted with adhesive lid.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
KV40 Kitvast junction box Ø 16 mm
Article number:
AT4827
- Fitted with adhesive lid.
- Equipped with conical tube inlet with tube snapper.
- Including 2 M3 x 12 mm screws.
KV40 Kitvast junction box Ø 19 mm
Article number:
AT4829
- Fitted with adhesive lid.
- Equipped with conical tube inlet with tube snapper.
- Including 2 M3 x 12 mm screws.
KV50 Kitvast junction box Ø 19 mm
Article number:
AT4821
- Fitted with adhesive lid.
- Including 2 M3 x 12 mm screws.
- 2 conical tube entries with tube snapper; one of which is closed by a breakout port.
KV50 Kitvast junction box Ø 16 mm
Article number:
AT4834
- Fitted with adhesive lid.
- Including 2 M3 x 12 mm screws.
- 2 conical tube entries with tube snapper; one of which is closed by a breakout port.
KV50 Kitvast junction box Ø 20 mm
Article number:
AT4841
- Fitted with adhesive lid.
- Including 2 M3 x 12 mm screws.
- 2 conical tube entries with tube snapper; one of which is closed by a breakout port.
KVD50 Kitvast Duo-box Ø 19 mm
Article number:
AT4843
- Fitted with adhesive lid.
- Equipped with conical tube inlet with tube snapper.
- Mounting screws: M3 x 18 mm.
- Dimensions of the box is according to 2 coupled MV50 boxes.
KVD50 Kitvast Duo-box Ø 20 mm
Article number:
AT4845
- Fitted with adhesive lid.
- Equipped with conical tube inlet with tube snapper.
- Mounting screws: M3 x 18 mm.
- Dimensions of the box is according to 2 coupled MV50 boxes.
KVK40 Kitvast Compact junction box Ø 19 mm
Article number:
AT4848
- Fitted with adhesive lid.
- Equipped with conical tube inlet with tube snapper.
- Mounting screws: M3 x 18 mm.
- Flush-mounting box for flush-mounting of special double-socket outlet with earthed earthing.
- Internal dimensions: 65 x 100 mm.
KV Kitvast Perilex box Ø 19 mm
Article number:
AT4849
- Fitted with adhesive lid.
- Equipped with conical tube inlet with tube snapper.
- Mounting screws: M3 x 18 mm.
Kitvast wall-ceiling transition box Ø 16 mm
Article number:
AT5272
- Fitted with adhesive lid.
- Equipped with conical tube inlet with tube snapper.
- Applicable for floor-wall connections/connections and floor-meter box connections/connections.
- Quick and easy realisation of a relevant end.
- Without unnecessary bends, easy wire pulling.
Kitvast wall-ceiling transition box Ø 19 mm
Article number:
AT5285
- Fitted with adhesive lid.
- Equipped with conical tube inlet with tube snapper.
- Applicable for floor-wall connections/connections and floor-meter box connections/connections.
- Quick and easy realisation of a relevant end.
- Without unnecessary bends, easy wire pulling.
Kitvast wall-ceiling transition box Ø 20 mm
Article number:
AT5288
- Fitted with adhesive lid.
- Equipped with conical tube inlet with tube snapper.
- Applicable for floor-wall connections/connections and floor-meter box connections/connections.
- Quick and easy realisation of a relevant end.
- Without unnecessary bends, easy wire pulling.