RK25 Wall-ceiling transition cream (RAL 1013)
Article number:
AT11970
- Attachment to K25/P25/Z25 conduit using click connection.
- Includes screw hole on one side for attachment to ceiling, floor etc.
- Overlaps the cover 5 mm. It is unnecessary to cut the cover perfectly square at exactly the right length.
RK25 Wall-ceiling transition black (RAL 9005)
Article number:
AT11971
- Attachment to K25/P25/Z25 conduit using click connection.
- Includes screw hole on one side for attachment to ceiling, floor etc.
- Overlaps the cover 5 mm. It is unnecessary to cut the cover perfectly square at exactly the right length.
RK25 Wall-ceiling transition white (RAL 9010)
Article number:
AT11972
- Attachment to K25/P25/Z25 conduit using click connection.
- Includes screw hole on one side for attachment to ceiling, floor etc.
- Overlaps the cover 5 mm. It is unnecessary to cut the cover perfectly square at exactly the right length.
ME25 Mounting plate cream (RAL 1013)
Article number:
AT5500
- Equipped with 2 brass bushes M4.
- Suitable for simplex surface-mount domestic switching devices.
ME25 Mounting plate white (RAL 9010)
Article number:
AT5502
- Equipped with 2 brass bushes M4.
- Suitable for simplex surface-mount domestic switching devices.
ME25 Mounting plate black (RAL 9005)
Article number:
AT5503
- Equipped with 2 brass bushes M4.
- Suitable for simplex surface-mount domestic switching devices.
MZ25 Mounting plate cream (RAL 1013)
Article number:
AT5510
- Equipped with 2 brass bushes M4.
- Suitable for duplex surface-mount domestic switching devices and combinations.
MZ25 Mounting plate black (RAL 9005)
Article number:
AT5511
- Equipped with 2 brass bushes M4.
- Suitable for duplex surface-mount domestic switching devices and combinations.
MZ25 Mounting plate white (RAL 9010)
Article number:
AT5512
- Equipped with 2 brass bushes M4.
- Suitable for duplex surface-mount domestic switching devices and combinations.
MS25 Mounting plate cream (RAL 1013)
Article number:
AT5520
- Equipped with 6 brass bushes M4.
- Suitable for dual mounting of simplex surface-mount domestic switching devices.
MS25 Mounting plate black (RAL 9005)
Article number:
AT5521
- Equipped with 6 brass bushes M4.
- Suitable for dual mounting of simplex surface-mount domestic switching devices.
MS25 Mounting plate white (RAL 9010)
Article number:
AT5522
- Equipped with 6 brass bushes M4.
- Suitable for dual mounting of simplex surface-mount domestic switching devices.
VM25 Reducing sleeve 16 mm cream (RAL 1013)
Article number:
AT5560
- Suitable for transition from 16 mm conduit to K25/P25/Z25 raceway duct.
- Attachment to K25/P25/Z25 conduit using click connection.
VM25 Reducing sleeve 16 mm black (RAL 9005)
Article number:
AT5561
- Suitable for transition from 16 mm conduit to K25/P25/Z25 raceway duct.
- Attachment to K25/P25/Z25 conduit using click connection.
VM25 Reducing sleeve 16 mm white (RAL 9010)
Article number:
AT5562
- Suitable for transition from 16 mm conduit to K25/P25/Z25 raceway duct.
- Attachment to K25/P25/Z25 conduit using click connection.
VM25 Reducing sleeve 19 mm cream (RAL 1013)
Article number:
AT5570
- Suitable for transition from 19 mm conduit to K25/P25/Z25 raceway duct.
- Attachment to K25/P25/Z25 conduit using click connection.
VM25 Reducing sleeve 19 mm black (RAL 9005)
Article number:
AT5571
- Suitable for transition from 19 mm conduit to K25/P25/Z25 raceway duct.
- Attachment to K25/P25/Z25 conduit using click connection.
VM25 Reducing sleeve 19 mm white (RAL 9010)
Article number:
AT5572
- Suitable for transition from 19 mm conduit to K25/P25/Z25 raceway duct.
- Attachment to K25/P25/Z25 conduit using click connection.
WS25 Two-way switch cream (RAL 1013)
Article number:
AT5574
- 10A / 250V with plug-in contacts for solid conductors.
- Consists of base plate with pre-assembled element, cover, rocker operation and mounting hardware.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
WS25 Two-way switch white (RAL 9010)
Article number:
AT5576
- 10A / 250V with plug-in contacts for solid conductors.
- Consists of base plate with pre-assembled element, cover, rocker operation and mounting hardware.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
WS25 Two-way switch black (RAL 9005)
Article number:
AT5578
- 10A / 250V with plug-in contacts for solid conductors.
- Consists of base plate with pre-assembled element, cover, rocker operation and mounting hardware.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
ZC25 Double socket cream (RAL 1013)
Article number:
AT5580
- 2-pin with rim earthing.
- 16A / 250V with plug-in contacts for solid conductors.
- Consists of base plate with pre-assembled element, cover and mounting hardware.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
ZC25 Double socket black (RAL 9005)
Article number:
AT5581
- 2-pin with rim earthing.
- 16A / 250V with plug-in contacts for solid conductors.
- Consists of base plate with pre-assembled element, cover and mounting hardware.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
ZC25 Double socket white (RAL 9010)
Article number:
AT5582
- 2-pin with rim earthing.
- 16A / 250V with plug-in contacts for solid conductors.
- Consists of base plate with pre-assembled element, cover and mounting hardware.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.