Our company
Service
Media library
News
Contact
KAISER GROUP

Our products

Attema develops and manufactures a wide range of innovative solutions for the professional installation and construction sector. From pluggable installation systems and enclosures for various construction methods to smart fibre optic solutions and flexible plastic floor spacers: all products are designed in close collaboration with professionals in the field. This ensures that they optimally meet the requirements of energy efficiency, ease of installation, sustainability and functional performance.

Installation
Distribution boards
Connectivity
Construction

Installation

Click-mate NXT Distribution boards
Installation 2.0
- Applicable in hollow ceiling constructions. - Suitable for rachel ceilings and metal stud ceilings. - Connectors from Wago-Winsta RD - Equipped with 1x power supply (male black), 1x switch (female brown), 1x light point on central box cover.
Installation RD
Flush-mounted boxes
- Suitable for rachel ceilings and metal stud ceilings. - Application: thick(er) ceiling tiles (e.g. 2 x 12.5 mm plasterboard). - 45% more welding space than a traditional square central box. - 12 combi spouts 16 and 19 mm. - Equipped with conical tube inlet with tube snapper. - Screw slots between the pipe entries. - Screw cams for bottom mounting. - Clamps: a 3rd hand for rachels 22 mm. - Suitable for cable entry in combination with KST (art. no. AT1062). - Matching covers: (art. no. AT5010 and art. no. AT5011).
Central junction boxes
Fire protection
- Can be used in wide boarded floors. - Distance from the underside of the conduit entries to the open side of the box: 60 mm. - The penetration of concrete water into conduit entries is prevented by adhesive tape. - Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately. - Suitable covers for mounting: Art. no. AT5010 and AT5011. - For in-factory installation - Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
Concrete construction system
- Toolless combination entry for M20/M25 conduits - Conduit entry limitation to prevent the need to shorten the conduit inside - No reinforcement cuts in tunnel section area
Installation housings
Junction boxes
Cable-mate junction boxes
- Each cable box includes 2 soft slide-in data lead-ins and 1 slide-in blind cover'. - Version with set plastic mounting plate for quick click-assembly on cable trays. - Matching AK2-D lid and RJ45 adapters can be ordered separately. - Suitable for cable trays from Legrand (Van Geel), Stago, Niedax, Vergokan, PUK and OBO. - 2 cable entries and 1 blanking plug are included per item - Matching AK2 front part can be ordered separately - Suitable for cable support systems from well-known manufacturers
Consolidation box
- Dimensions: 102 x 67 x 50 mm (LxWxH) - Adapters of choice can be ordered separately. - Break-out ports in the cover for various sizes of cable conduits.
Universal ICT solutions
- Supplied with mounted cover. - Suitable for bell, signal, telephone, control and coax cable. - Internal dimensions: 16 x 9 mm
Mini and Cable Trunking
- Quick installation due to attachment holes in 'double' bottom. - Alignment correction possible thanks to slot and hole pattern in bottom. - Internal dimensions: 23 x 8 mm
P25/K25 Trunking system (flat tube system)
- Cover included. - Can be used in combination with the corner pieces for the K25 / P25 raceway system. - Includes slots and nail holes. - Internal dimensions: 22.5 x 10.5 mm
Z25/F25 Trunking system
- 2 completely separated compartments. - Suitable for installation with insulated installation wires. - Includes 4 sets clip C40 (short and long).
K40 Skirting Trunking System
- Cover included. - Bottom perforation according to standard.
Wiring ducts
Flexible conduits
- For detecting obstructions in pipe. - Complete set, delivered in steel case. - Works on 9V batteries (not included). - Consists of transmitter, receiver, push-button and probe.
Tools & support materials
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Airtight sealing sleeves

Distribution boards

Click-mate NXT | Pluggable distribution boards
Click-mate NXT | Empty boxes and parts
Click-mate NXT | Components
Click-mate NXT | Extension enclosures
Click-mate NXT | PV Distribution Boards
Click-mate NXT | Main switch enclosures
Click-mate NXT | with RCDs and MCBs
Click-mate NXT | Distribution Boards with RCBOs
Click-mate XL 115 S | Extension enclosure

Connectivity

- One universal product for the civil team, independent of the chosen "direct buried" customer connection cable or duct. - Standard detection coil in the lid (Telecom 101.4 kHz). - Easy assembly. - Sand-tight port seals. - Parts in order of use packed in a sturdy cardboard box. - Assembly instructions included. - Dimensions: 90 x 35 x 30 cm (LxWxH), ground cover 30 cm for pipes at a depth of 60 cm. - Scope of delivery: distribution closure, sand seal
FttX Distribution closure
- 48 hybrid entry ports Ø 3,0 - 8,0 mm. - Flexibility in the FTTX concept. - Flexibility in fiber network management. - Integrated strain relief per cable / duct. - Easy entry seal for each individual cable or duct. - Structured management of cables, fibres and welding protectors. - Suitable for direct buried customer cables and ducts - Easy to install. - Save on working time - IP65 Waterproof - Impact-resistant. - Window Cut. - Scope of delivery: FMB including splice cassettes, 4x mounting screws, sealing material, mounting bracket
Fiber Management Box
- Compact dimensions: Ø 85 mm x 155 mm - IP68 waterproof, according to EN 60529 - Suitable for cable diameters Ø 5 mm - Ø 6.5 mm - Integrated strain relief per cable - Cassette is suitable for fiber optic with R = 22.5 mm - The splice tray capacity is 2 splice connectors ANT/mini heatshrink or 2 splice protectors heatshrink Ø 2.4 mm x 45 mm. - Packed individually in transparent foil - Scope of delivery: repair sleeve
Connection & repair closures
- Very compact and sleek design. - Supplied as standard with coupling bushes SC/APC, with integrated dust seal. - Simple, clean and secure patch connection with plug-in module. - Sealable on both the passive and the active side. - Time saving due to systematic assembly sequence. - Can also be used pre-installed. - Scope of delivery: FTU, 2× SC/APC Simplex coupling
Fiber Termination Unit
- Set of patent splice trays for heat-shrink splice protector Ø 2.4mm x length 45 mm. - Contains: - 2 cassettes HS12 / 8 mm, each containing 12 heat-shrink splice protectors + 1 grooved cassette case, overall capacity 24 splices. - Scope of delivery: cassette, holder
Fiber splice cassettes
- Each cable box includes 2 soft slide-in data lead-ins and 1 slide-in blind cover'. - Version with flat plastic mounting plate for quick click-mounting on cable trays. - Matching AK2-D lid and RJ45 adapters can be ordered separately. - Suitable for cable trays from Legrand (Van Geel), Stago, Niedax, Vergokan, PUK and OBO. - 2 cable entries and 1 blanking plug are included per item - Matching AK2 front part can be ordered separately - Suitable for cable support systems from well-known manufacturers
Consolidation box
- Dimensions: 102 x 67 x 50 mm (LxWxH) - Adapters of choice can be ordered separately. - Break-out ports in the cover for various sizes of cable conduits.
Universal ICT solutions
- Easy to install. - Universal applicable. - Impact-resistant. - Ability to drill holes over the entire length of the cable duct. - Suitable to cover up existing COAX-cable ducts. - Paintable with use of primer. - Easy to saw. - Increased UV resistance.
Facade profile
- Cover included. - Can be used in combination with the corner pieces for the K25 / P25 raceway system. - Includes slots and nail holes. - Internal dimensions: 22.5 x 10.5 mm
Z25/F25 Trunking system
- Mount using BC25 wall clips (art. no. AT5600). - Stackable. - Internal dimensions: 23 x 8 mm
P25/K25 Trunking System
- 2 completely separated compartments. - Suitable for installation with insulated installation wires. - Includes 4 sets clip C40 (short and long).
K40 Skirting Trunking System
- Cover included. - Includes slots and nail holes. - Internal dimensions: 37 x 37 mm
Mini and Cable Trunking
- Cover included. - Bottom perforation according to standard.
Wiring ducts
- Sealed package. - Internal diameter: Ø 11.5 mm
Flexible conduit
- for sealing electrical installation conduits - ECON® technology for easy cable entry - permanently flexible plastic
Tools & support materials

Construction

- Very good clamping. - Quick to assemble, even at low temperatures. - Large flow of concrete.
Ring spacers
- Colour suitable for self-compacting concrete. - Suitable for heavy nets - Stable due to wide support
Floor spacers
- Quick to process - Manageable length - Small contact surface with mould - Good circulation - Stable - Coupling to longer lengths
Floor spacers | Strips
- Hand-friendly design. - Easy to assemble. - Large range of bar diameters per version.
Rebar End Spacer
- For bonding insulation material to concrete. - Approximately 4 - 5 pieces per m²
Insulation fixing materials - PN
- Corner frame without nail strip. - Usable several times.
Corner frames and nail strips
- Prevents damage to concrete elements during storage. - Usable several times. - Equipped with nail holes.
Support materials
- Screw sleeve breakaway in formwork. - Screw-on sleeve. - Concrete pouring and stripping, part of the formwork breaks off. - Do not unscrew the threaded section until assembly is complete.
Concrete Construction Accessories

  • Nederlands vakmanschap uit Gorinchem

    Veel ATTEMA-producten worden ontwikkeld en geproduceerd in Gorinchem, Nederland. Hier combineren we jarenlange ervaring met slimme innovaties en hoogwaardige productietechnieken. Zo maken we installatieoplossingen die betrouwbaar, praktisch en eenvoudig te verwerken zijn – ontwikkeld met oog voor de dagelijkse praktijk van de installateur.