CD80R Junction box round with tape Ø 16/19 mm
Article number:
AT1031
- Can be used in wide boarded floors.
- Distance from the underside of the conduit entries to the open side of the box: 60 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
MD-CD80R centre ceiling box
Article number:
AT1032
- Can be used in wide boarded floors.
- Distance from the underside of the conduit entries to the open side of the box: 60 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
CD100R Junction box round with tape Ø 16/19 mm
Article number:
AT1035
- Can be used in wide boarded floors.
- Distance from the bottom of the conduit entry to the open side of the box: 80 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
MD-CD100R centre ceiling box
Article number:
AT1036
- Can be used in wide boarded floors.
- Distance from the bottom of the conduit entry to the open side of the box: 80 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
CD80R Junction box, round, in plastic bag Ø 16/19 mm
Article number:
AT1033
- Can be used in wide boarded floors.
- Distance from the underside of the conduit entries to the open side of the box: 60 mm.
- Plastic bag against ingress of concrete water.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
CD100R Junction box, round, in plastic bag Ø 16/19 mm
Article number:
AT1034
- Can be used in wide boarded floors.
- Distance from the bottom of the conduit entry to the open side of the box: 80 mm.
- Plastic bag against ingress of concrete water.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
CA70R Junction box 16/19 mm with tape Ø 16/19 mm
Article number:
AT1019
- Equipped with 9 combi-heads 16/19 mm.
- Applicable in solid floors and hollow core slab floors.
- Clip-resistant in borehole ø 80 mm.
- Matching covers: (art. no. AT5010 and art. no. AT5011).
Plaster compensation ring, round junction boxes
Article number:
AT1511
- Easy to cut per 5 mm.
- Height correction possible from 5 to 30 mm.
Plaster compensation ring 25 mm round junction boxes
Article number:
AT1514
- Fitted with inserts and pre-assembled M4 screws.
- Stackable underneath.
- Universally applicable on any round central box.
Junction box cover, round without terminal block
Article number:
AT5010
- Flat design, so that the welding space in the central box is used optimally.
- Suspension hook and 2 bolts M4x14 fixed in the lid.
- M4 bolts with combi head; suitable for automatic screwdriver.
- Universally applicable on any round central box.
Junction box round, with screw-type plug-in terminal block
Article number:
AT5011
- Flat design, so that the welding space in the central box is used optimally.
- Suspension hook and 2 bolts M4x14 fixed in the lid.
- M4 bolts with combi head; suitable for automatic screwdriver.
- Universally applicable on any round central box.