Installation housings

HaloX® system for on-site mixed concrete

HaloX® system for retrofitting installation in concrete ceilings

- One-part housing with integrated mineral fibreboard
- Toolless combination entry for M20/M25 conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside

HaloX® system for factory production

- for rigid and pivoting LED luminaires
- circumferential airtight sealing lip
- Swivel trough for alignment of the luminaire

ThermoX® LED system for insulated hollow ceilings

- for halogen luminaires and pivoting LED luminaires
- max. installation height for low-voltage luminaire 65 mm, HV luminaire 70 mm
- Heat distortion resistant to 220°C
- lamp wattage LV: max. 35 W with AL reflector / 20 W Cool-Beam
- lamp wattage for HV luminaires max. 35 W with AL reflector (socket GU 10)
- max. LED lamp output 6.6 W
- Front can be used on both sides

ThermoX® housing for suspended ceilings

- One-part housing for holding the system magnet (Art. No. 1299-69) and system magnet PLUS (Art. No. 1299-70)
- Toolless combination entry for M20/M25 conduits
- Conduit entry limitation to prevent the need to shorten the conduit inside
- Suitable with signal cover

HaloX: build-in housing for evacuation speaker systems

For installers working on voice evacuation systems and fire safety projects, securing sufficient installation space is often a challenge. The HaloX 250 from ATTEMA offers a solution to this problem thanks to its large diameter and generous installation volume. Within the HaloX series, the HaloX 250 is the model with the largest installation diameter. This makes this enclosure particularly suitable for larger ceiling components such as loudspeakers, sensors and specialised light fittings. When combined with the optional tunnel version, it provides extra space for cabling, transformers and other installation components.