The Consolidation Box from Attema makes it possible to install ICT cabling in a flexible manner, because the installation is divided into two steps. The largest portion of the work takes place during the rough construction, at the same time as the other cabling is installed in the building. As a result, you only have to install a small portion of the ICT cabling during the finishing phase. The Consolidation Box complies with the installation standards of EIA/TIA 568A/B, ISO 11801 and NEN-EN 50173.
Adapters
Adapter W, type Wieland BST14
similar
Adapter W, type Wieland BST14 zwart
Article number:
AT1978.01
- Adapter for mounting of Wieland BST14 snap-in connector in the AK2-D cover.
- This connector can be used for control signals for light control systems and dimmable fixtures with a 0-10V control signal.
Adapters
ETIM Product Classification:
Insert/cover for communication technology
Insert/cover for communication technology
Assembly arrangement:
Modular device for domestic switching devices
Utilization:
Modular Jack
Support ring:
No
With dust cover:
No
With hinged lid:
No
Outlet direction:
Contact type:
Imprintable label:
Without indication field
With imprint:
No
Mounting method:
Module frame
Material:
Plastic
Material quality:
Thermoplastic
Halogen free:
No
Anti-bacterial treatment:
No
Surface protection:
Untreated
Surface finishing:
Matt
Colour:
Grey
RAL-number (similar):
Transparent:
No
Type of fastening:
Engage (snap)
Number of modules (module system):
1
With buses/couplings:
Suitable for number of connectors:
Isolated connections:
With strain relief:
No
Shielded buses:
Shielded housing:
Luster terminal:
No
With lighting:
No
Suitable for degree of protection (IP):
IP20
Impact strength:
Device width:
Device height:
Device depth:
Min. depth of built-in installation box:
Adapter W, type Wieland BST14 zwart
Article number:
AT1978.01
- Adapter for mounting of Wieland BST14 snap-in connector in the AK2-D cover.
- This connector can be used for control signals for light control systems and dimmable fixtures with a 0-10V control signal.