Our company
Service
Media library
News
Contact
KAISER GROUP
Return
Air-tight sleeve
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
1 / 2
Open Cadenas Modal
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free

Air-tight sleeve for permanent sealing of pipe penetrations through air-tight layers,
Self-adhesive air-tight sleeve with anti-kink sleeve to compensate for movements during installation or on-site, for individual electric cables Ø 8-12 mm, air-tight design in accordance with DIN 18015-5.
Temperature resistant from -30°C to 80°C, UV resistant, halogen-free in accordance with DIN VDE 0604-2-100
Read more Read less

Air-tight sleeves for cables

Kaiser GmbH & Co.KG
Article number:: 9059-46
EAN: 4013456480322
air tightness
Product length: 150 mm
Product width: 150 mm
Product depth: 30 mm
air tightness: Yes
Packaging / Packaging quantity: 10 / 30
View more product data
Datasheet (PDF)

accessories

- The self-adhesive primer is water and heat resistant. It can also be used on Styrofoam, EPS, XPS etc.
Primer 250 ml, solvent-free
Article number: 9000-02
  • The self-adhesive primer is water and heat resistant. It can also be used on Styrofoam, EPS, XPS etc.
Read more

similar

- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for cables
Article number: 9059-44
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for cables
Article number: 9059-45
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for cables
Article number: 9059-47
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-48
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-55
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-49
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-51
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-52
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-53
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-54
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more

Air-tight sleeve

Air-tight sleeve for sealing conduit and cable entries in the interior of air-tight building shells.
  • extremely strong adhesion
  • For guaranteed air-tight feed-throughs, especially in the attic
  • 12 types for different conduit and cable diameters
  • Suitable for moisture barrier foils, sarking membranes, OSB boards *

Examples of use

Processing instructions

Air-tight conduit entries can be made cleanly and easily by using the self-adhesive KAISER air-tight sleeves.
The sleeves create faster, more stable and, above all, more air-tight transitions than improvised methods.
Please ensure that the base is dry and free from dust and grease. Processing should be carried out at a temperature higher than -5°C, and full adhesive strength is achieved after 24 hours. The sleeves have an unlimited shelf life when stored cool and dry at room temperature. * For fibreboard, we recommend a pre-coat using primer

Measuring the air-tightness

Installation

Push the sleeve over the cable or conduit.
Push the sleeve over the cable or conduit.
Remove the foil from the sleeve.
Remove the foil from the sleeve.
Stick on the sleeve and press firmly on to the base, working outwards from the centre.
Stick on the sleeve and press firmly on to the base, working outwards from the centre.
ETIM Product Classification:
Accessories/spare parts for junction boxes/cases for mounting in the wall
Type of accessory/spare part: Other
Accessory: No
Spare part:
Suitable for built-in installation box: No
Suitable for central conduit box: No

Dimensions / Form

Product length:
150 mm
Product width:
150 mm
Product depth:
30 mm

Installationdetails

Assembly type:
HW (drywall/lightweight construction)

Safety / Properties

air tightness:
Yes
- The self-adhesive primer is water and heat resistant. It can also be used on Styrofoam, EPS, XPS etc.
Primer 250 ml, solvent-free
Article number: 9000-02
  • The self-adhesive primer is water and heat resistant. It can also be used on Styrofoam, EPS, XPS etc.
Read more
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for cables
Article number: 9059-44
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for cables
Article number: 9059-45
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for cables
Article number: 9059-47
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-48
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-55
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-49
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-51
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-52
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-53
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more
- Continuous sealing by means of air-tight layers for penetration of cables - extremely strong adhesion - Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C - UV-resistant, halogen-free
Air-tight sleeves for conduits
Article number: 9059-54
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Read more