similar

CW75-2E0, enkelpolige schakeling
Article number: AT8403-0
  • Applicable in hollow ceiling constructions.
  • Suitable for rachel ceilings and metal stud ceilings.
CW75-2E1, enkelpolige schakeling
Article number: AT8403-1
  • Applicable in hollow ceiling constructions.
  • Suitable for rachel ceilings and metal stud ceilings.
CW75-2E3, enkelpolige schakeling
Article number: AT8403-3
  • Applicable in hollow ceiling constructions.
  • Suitable for rachel ceilings and metal stud ceilings.
CW75-2E4, enkelpolige schakeling
Article number: AT8403-4
  • Applicable in hollow ceiling constructions.
  • Suitable for rachel ceilings and metal stud ceilings.

Installation 2.0

Installation 2.0 is a unique and innovative concept. Thanks to the extremely complete range, you can install 100% pluggable: from distribution box to switching material. All products are assembled according to your wishes, tested and, if desired, delivered per floor or unit to the agreed location and time. Plug in. Assemble. Done! With Install 2.0, you work three times faster on the construction site than with traditional installation. And you also reduce your failure costs by 90%.
Save time and prevent failure costs. Install the Click-mate NXT Distribution Box Plug & Play.
Save time and prevent failure costs. Install the Click-mate NXT Distribution Box Plug & Play.
Wide range of pluggable cords, suitable for use in hollow spaces and maintenance-free according to EN-IEC 61535, equipped with Attema connectors.
Wide range of pluggable cords, suitable for use in hollow spaces and maintenance-free according to EN-IEC 61535, equipped with Attema connectors.
Easily connect to the pluggable cable boxes equipped with Attema connectors.
Easily connect to the pluggable cable boxes equipped with Attema connectors.
Pluggable CW75 Central boxes, applicable in hollow ceiling constructions.
Suitable for batten ceilings and metal stud ceilings, equipped with Attema connectors.
Pluggable CW75 Central boxes, applicable in hollow ceiling constructions. Suitable for batten ceilings and metal stud ceilings, equipped with Attema connectors.
ETIM Product Classification:
Box/housing for built-in mounting in the wall/ceiling
Mounting method: Hollow ceiling
Shape: Round
Construction type: Central conduit box
Model: Single
Provided with revolving ring: No
Couplable: No
Equipped with: Other
Diameter: 76 mm
Length:
Width:
Depth: 79 mm
Inner depth: 77 mm
Suitable for wall/board thickness: 25 mm
Suitable for number of device inserts:
Mounting switching equipment:
With screws: No
Number of non-adjustable device fixing lugs:
Number of adjustable device fixing lugs:
Housing feed-through by break-out opening: No
Housing feed-through by seal membrane: No
Housing feed-through by nozzle: No
Housing feed-through by step membrane: No
Suitable for tube diameter: 16/19 mm
Suitable for cable diameter:
Pipe locking: No
Pipe locking optional: No
Inlet from the rear: No
Number of inlets: 12
Number of included spouts:
Material: Plastic
Halogen free: No
Surface protection: Untreated
Colour: Grey
Degree of protection (IP): IP20
Degree of protection (NEMA):
Cover model: Mounting cover
Transparent cover: No
Cover attachment: Screwed
Sealable: No
Circuit integrity: None
With screening: No
Airtight: No
Max. conductor cross section: 2,5 mm²
Number of poles of the clamp:
Clamp position fixed: No
Luminaire hook mounting: No
Nozzle: Tunnel branch pipe
Special application: Other
With partition panel:
Compliant with BS 4662:

Dimensions / Form

Product Ø:
79 mm
Installation opening (wall/ceiling) Ø:
76 mm

Connections / Entries

Number of entries:
12
For conduit Ø:
16 mm, 19 mm

Installationdetails

Assembly type:
hollow ceiling

Safety / Properties

Special application:
Without

Electrical Properties

Number of outputs:
2
Circuit:
2x 1-pole
CW75-2E0, enkelpolige schakeling
Article number: AT8403-0
  • Applicable in hollow ceiling constructions.
  • Suitable for rachel ceilings and metal stud ceilings.
CW75-2E1, enkelpolige schakeling
Article number: AT8403-1
  • Applicable in hollow ceiling constructions.
  • Suitable for rachel ceilings and metal stud ceilings.
CW75-2E3, enkelpolige schakeling
Article number: AT8403-3
  • Applicable in hollow ceiling constructions.
  • Suitable for rachel ceilings and metal stud ceilings.
CW75-2E4, enkelpolige schakeling
Article number: AT8403-4
  • Applicable in hollow ceiling constructions.
  • Suitable for rachel ceilings and metal stud ceilings.