Attema has expanded its sleek, modern and patented K25/P25 Trunking system with a series of contemporary switchgear, especially suitable for flat tubes. This switching material (in cream and white) is distinguished by its compact dimensions, sleek design, easy processing and of course the top quality that you have come to expect from Attema.
K25/P25 Trunking Accessories
DP25 single data point Cat 5e white (RAL 9010)
Product width:
64 mm
Product depth:
51 mm
Product length:
64 mm
Packaging quantity:
10
similar
DP25 single data point Cat 5e cream (RAL 1013)
Article number:
AT5592
- Consists of base plate, cap, Cat 5e RJ45 jack with toolless cutting contacts for data cable connection, transparent mounting plate with simple click installation of RJ45 jack, cover with dust cap and mounting hardware.
- Mounting plate and cover can be rotated for both horizontal and vertical application, so that the RJ45 jack and dust cap are always in the correct position.
- Application possible in combination with K25/P25 or Z25/F25 duct.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
DP25 single data point Cat 5e black (RAL 9005)
Article number:
AT5593
- Consists of base plate, cap, Cat 5e RJ45 jack with toolless cutting contacts for data cable connection, transparent mounting plate with simple click installation of RJ45 jack, cover with dust cap and mounting hardware.
- Mounting plate and cover can be rotated for both horizontal and vertical application, so that the RJ45 jack and dust cap are always in the correct position.
- Application possible in combination with K25/P25 or Z25/F25 duct.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
K25/P25 Trunking Accessories
ETIM Product Classification:
Insert/cover for communication technology
Insert/cover for communication technology
Assembly arrangement:
Basic element with housing top
Utilization:
Modular Jack
Support ring:
No
With dust cover:
No
With hinged lid:
No
Outlet direction:
Contact type:
Imprintable label:
Without indication field
With imprint:
No
Mounting method:
Surface mounted
Material:
Plastic
Material quality:
Thermoplastic
Halogen free:
No
Anti-bacterial treatment:
No
Surface protection:
Untreated
Surface finishing:
Glossy
Colour:
White
RAL-number (similar):
9.010
Transparent:
Type of fastening:
Mounting with screw
Number of modules (module system):
With buses/couplings:
Suitable for number of connectors:
Isolated connections:
With strain relief:
No
Shielded buses:
Shielded housing:
Luster terminal:
No
With lighting:
No
Suitable for degree of protection (IP):
IP40
Impact strength:
Device width:
Device height:
Device depth:
Min. depth of built-in installation box:
Dimensions / Form
- Product width:
- 64 mm
- Product depth:
- 51 mm
- Product length:
- 64 mm
DP25 single data point Cat 5e cream (RAL 1013)
Article number:
AT5592
- Consists of base plate, cap, Cat 5e RJ45 jack with toolless cutting contacts for data cable connection, transparent mounting plate with simple click installation of RJ45 jack, cover with dust cap and mounting hardware.
- Mounting plate and cover can be rotated for both horizontal and vertical application, so that the RJ45 jack and dust cap are always in the correct position.
- Application possible in combination with K25/P25 or Z25/F25 duct.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.
DP25 single data point Cat 5e black (RAL 9005)
Article number:
AT5593
- Consists of base plate, cap, Cat 5e RJ45 jack with toolless cutting contacts for data cable connection, transparent mounting plate with simple click installation of RJ45 jack, cover with dust cap and mounting hardware.
- Mounting plate and cover can be rotated for both horizontal and vertical application, so that the RJ45 jack and dust cap are always in the correct position.
- Application possible in combination with K25/P25 or Z25/F25 duct.
- Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
- Integrated stop on base plate for duct and cover.
- Overlaps duct cover by 5 mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
- Knockout in the base plate for rear inlet of duct Ø 16 mm.