Installation 2.0 is a pluggable installation system based on pre-wired central and cable boxes in combination with prefabricated mounted switching material and a pluggable group box. These components are connected with flexible cables. The installation time is therefore greatly reduced compared to traditional installation, and failure costs are kept to a minimum.
Cca cords
Fire class Cca cords are available upon request. Contact us for current delivery times.
Installation 2.0 Cables
Eca - aansluitsnoer dimmer, Female - open eind, 12 meter
Cable length:
12 m
Cable/electric cable Ø:
7.8 mm
Assembled electric cable type:
Type 1
Packaging quantity:
5
Installation 2.0 Cables
Installation 2.0
Installation 2.0 is a unique and innovative concept. Thanks to the extremely complete range, you can install 100% pluggable: from distribution box to switching material. All products are assembled according to your wishes, tested and, if desired, delivered per floor or unit to the agreed location and time. Plug in. Assemble. Done! With Install 2.0, you work three times faster on the construction site than with traditional installation. And you also reduce your failure costs by 90%.
ETIM Product Classification:
Patch cord for plug-in building installation
Patch cord for plug-in building installation
Rated voltage:
400 V
Rated current:
16 A
Number of poles:
4
Degree of protection (IP):
IP20
Type of finished cable:
Other
Type side 1:
Plug
Type side 2:
Free conductor end
Conductor end treatment:
Ultrasonic compressed wire ends
Total length:
12.000 mm
Mechanical coding:
No
Colour coding/contact insert:
Blue
RAL-number coding/contact insert:
Housing material:
Housing colour:
Black
Cable type:
H05VV-F
Cable diameter:
78 mm
Dismantle length:
90 mm
Strip length:
12 mm
Colour outer sheath:
Brown
Pole codification:
1, 2, 3
Nominal cross section conductor:
1,5 mm²
Type of locking:
Integrated in plug-in connector
Insulating piece permanent temperature-resistant:
90 °C
Cable permanent temperature-resistant to:
60 °C
Max. operating temperature at conductor:
50 °C
Halogen free:
No
Fire load:
4,08 kWh
Contact material:
Surface coating contacts:
Tinned
Pollution degree:
2
Continuity resistance:
0 mOhm
Rated surge voltage:
4 kV
Reaction-to-fire according to EN 13501-6: Class:
Reaction-to-fire according to EN 13501-6: Smoke production:
Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
Reaction-to-fire according to EN 13501-6: Acidity:
Dimensions / Form
- Cable length:
- 12 m
Electrical Properties
- Cable/electric cable Ø:
- 7.8 mm
- Assembled electric cable type:
- Type 1
- Cable function:
- Function 1
Certificates & Quality marks
- Fire class:
- ECA