Our company
Service
Media library
News
Contact
KAISER GROUP
Return
HaloX® 100 installation kit
- for retrofitting of HaloX®-O housings into slab ceilings - required hole size Ø 150-160 mm
Open Cadenas Modal
  • for retrofitting of HaloX®-O housings into slab ceilings
  • Core drilling Ø 150 - 160 mm.

HaloX® 100 installation kit, for retrofitting in slab ceilings
Front part for concrete construction installation, on-site mixed concrete, for retrofitting HaloX® 100 installation housings in slab ceilings
Plastic installation kit, depth 30 mm, for insertion between housing and front part, suitable for housing (1281-XX and 1290-30), with lateral support seats for dowel fixing, flame retardant according to DIN EN 60695 up to 650° C, halogen-free in accordance with DIN VDE 0604-2-100
Read more Read less

HaloX® 100 installation kit

Kaiser GmbH & Co.KG
Article number:: 1281-20
EAN: 4013456546783
Product depth: 30 mm
Packaging quantity: 10
View more product data
Datasheet (PDF)

HaloX® 100 installation kit

HaloX® 100 installation kit can be retrofitted in existing slab ceilings (50 mm thickness and greater) with or without transformer tunnel.
  • For retrofitting in slab ceilings
  • Minimal effect on statics
  • Large selection of opening sizes up to Ø 100 mm
  • Extension rings for bridging the slab ceiling element and for increasing the luminaire installation depth

Note

Note

HaloX® installation kit mounting

Cut drilling hole (Ø 150–160 mm) in the slab ceiling.
Cut drilling hole (Ø 150–160 mm) in the slab ceiling.
Combine the extension ring and front part to correspond to the ceiling thickness and installation depth.
Combine the extension ring and front part to correspond to the ceiling thickness and installation depth.
Attach the housing and place in the drilling hole, mark and fasten. Install the conduit in the KSK entry.
Attach the housing and place in the drilling hole, mark and fasten. Install the conduit in the KSK entry.
If necessary, secure the fixed housing with wire to the reinforcement.
If necessary, secure the fixed housing with wire to the reinforcement.
Order front part separately
ETIM Product Classification:
Accessories/spare parts for luminaire mounting box
Type of accessory/spare part: Built-in set
Accessory: No
Spare part:

Dimensions / Form

Product depth:
30 mm

Installationdetails

Assembly type:
BB (solid construction)

Safety / Properties

Special application:
on-site mixed concrete
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)