The concrete ceiling junction boxes are specially developed for the installation of conventional systems in concrete ceilings. These junction boxes are equipped with combi-inlets combined for 16 mm and 19 mm conduits. The ceiling junction boxes Concrete are used in solid floors and concrete hollow-core floors, orprecast slab floors.
Central junction boxes concrete ceiling
1 /
3
MD-CD80R centre ceiling box
Product Ø:
85 mm
Product depth:
85 mm
Installation opening (wall/ceiling) Ø:
80 mm
Number of entries:
8
For conduit Ø:
16 mm, 19 mm
Halogen-free:
Yes
Packaging quantity:
54
recommendations
MD-CD100R centre ceiling box
Article number:
AT1036
- Can be used in wide boarded floors.
- Distance from the bottom of the conduit entry to the open side of the box: 80 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
CD80R Junction box round with tape Ø 16/19 mm
Article number:
AT1031
- Can be used in wide boarded floors.
- Distance from the underside of the conduit entries to the open side of the box: 60 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
similar
CD80R Junction box round with tape Ø 16/19 mm
Article number:
AT1031
- Can be used in wide boarded floors.
- Distance from the underside of the conduit entries to the open side of the box: 60 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
Central junction boxes concrete ceiling
ETIM Product Classification:
Box/housing for built-in mounting in the wall/ceiling
Box/housing for built-in mounting in the wall/ceiling
Mounting method:
Concrete building
Shape:
Round
Construction type:
Central conduit box
Model:
Single
Provided with revolving ring:
No
Couplable:
No
Equipped with:
None
Diameter:
77 mm
Length:
Width:
Depth:
Inner depth:
80 mm
Suitable for wall/board thickness:
50 - 60 mm
Suitable for number of device inserts:
1
Mounting switching equipment:
With screws:
No
Number of non-adjustable device fixing lugs:
Number of adjustable device fixing lugs:
Housing feed-through by break-out opening:
No
Housing feed-through by seal membrane:
No
Housing feed-through by nozzle:
No
Housing feed-through by step membrane:
No
Suitable for tube diameter:
16/19 mm
Suitable for cable diameter:
Pipe locking:
No
Pipe locking optional:
No
Inlet from the rear:
No
Number of inlets:
8
Number of included spouts:
0
Material:
Plastic
Halogen free:
No
Surface protection:
Untreated
Colour:
Grey
Degree of protection (IP):
IP20
Degree of protection (NEMA):
Cover model:
None
Transparent cover:
Cover attachment:
Snapped on
Sealable:
No
Circuit integrity:
None
With screening:
No
Airtight:
No
Max. conductor cross section:
6 mm²
Number of poles of the clamp:
0
Clamp position fixed:
No
Luminaire hook mounting:
No
Nozzle:
Tunnel branch pipe
Special application:
None
With partition panel:
No
Compliant with BS 4662:
Dimensions / Form
- Product Ø:
- 85 mm
- Product depth:
- 85 mm
- Installation opening (wall/ceiling) Ø:
- 80 mm
Connections / Entries
- Number of entries:
- 8
- For conduit Ø:
- 16 mm, 19 mm
Safety / Properties
- Halogen-free:
- Yes
MD-CD100R centre ceiling box
Article number:
AT1036
- Can be used in wide boarded floors.
- Distance from the bottom of the conduit entry to the open side of the box: 80 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
CD80R Junction box round with tape Ø 16/19 mm
Article number:
AT1031
- Can be used in wide boarded floors.
- Distance from the underside of the conduit entries to the open side of the box: 60 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
CD80R Junction box round with tape Ø 16/19 mm
Article number:
AT1031
- Can be used in wide boarded floors.
- Distance from the underside of the conduit entries to the open side of the box: 60 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)