Attema's Magvast® concrete construction system is used mainly in concrete factories, but also on building sites. Magvast® works with magnets that are clamped into the boxes to prevent concrete water from entering the boxes.
After measuring, the magnets are placed on which the box is then placed. After the formwork is removed, the magnet remains behind on the steel table or formwork, after which it can be removed and reused. Magvast® is then ready for the next cycle. It is a flexible system that does not damage the formwork.
Attema has magnets for various types of boxes in its range. Magnets have a high clamping force (>100 kg).
Suitable for steel formwork.
Attached without drilling, so no damage to the formwork.
Magvast concrete system junction boxes
MV50 Magvast junction box Ø 20 mm
similar
MV50 Magvast junction box Ø 19 mm
Article number:
AT4839
- 2 conical tube entries with tube snapper; one of which is closed by a breakout port.
- Including 2 M3 x 12 mm screws.
MV50 Magvast junction box Ø 16 mm
Article number:
AT4880
- 2 conical tube entries with tube snapper; one of which is closed by a breakout port.
- Including 2 M3 x 12 mm screws.
Magvast concrete system junction boxes
Installationdetails
- Assembly type:
- BB (solid construction)
Safety / Properties
- Halogen-free:
- Yes
- Special application:
- on-site mixed concrete
MV50 Magvast junction box Ø 19 mm
Article number:
AT4839
- 2 conical tube entries with tube snapper; one of which is closed by a breakout port.
- Including 2 M3 x 12 mm screws.
MV50 Magvast junction box Ø 16 mm
Article number:
AT4880
- 2 conical tube entries with tube snapper; one of which is closed by a breakout port.
- Including 2 M3 x 12 mm screws.