Especially for the Installation 2.0 concept, Attema has extended its range of Click-mate NXT distribution boards with a pluggable output bridge. The fully pre-wired pluggable output bridge can be fitted with up to 12 to 16 connections for single-phase end groups. Connections for electric cooking, mechanical ventilation or power groups have also been taken into account: space is reserved in the output bridge for up to 2 to 4 pieces of 5-pin flat connectors. All connectors are pre-wired with 2.5 mm² and equipped with locking latches as standard.
Almost all "traditional" distribution boards can be equipped with a fully pre-wired output bridge with round connectors. Just like the standard distribution boards, Attema assembles the pluggable distribution boards completely as desired within a few days.
Looking for a different configuration? Use the Click-mate NXT Assistant tool to assemble your own pluggable distribution box in no time. Or ask one of our sales staff about the possibilities.
Installation 2.0 Click-mate NXT distribution boards
NXT SAW-22/22-H2 Distribution board
Product width:
220 mm
Product depth:
250 mm
Rated current:
40 A
Number of residual current circuit breakers 2P:
2
Total number of circuit breakers:
4
Main switch (xxA):
40 A
Connection (1/3-phase):
1-phase
Grey groups:
2
similar
Installation 2.0 Click-mate NXT distribution boards
Pluggable distribution box Click-mate NXT
Installation 2.0
Installation 2.0 is a unique and innovative concept. Thanks to the extremely complete range, you can install 100% pluggable: from distribution box to switching material. All products are assembled according to your wishes, tested and, if desired, delivered per floor or unit to the agreed location and time. Plug in. Assemble. Done! With Install 2.0, you work three times faster on the construction site than with traditional installation. And you also reduce your failure costs by 90%.
ETIM Product Classification:
Small distribution board equipped
Small distribution board equipped
Mounting method:
Surface mounted
Number of rows:
Number of phases:
1
Protection:
Miniature-/earth leakage circuit breaker
Number of single-phase miniature circuit breakers (MCB):
Number of three-phase miniature circuit breakers (MCB):
Release characteristic:
Rated short-circuit breaking capacity Icn according to EN 60898 at 230 V:
Power consumption:
Total number of groups:
4
Number of direct groups:
0
Number of light groups:
4
Number of groups behind earth leakage switch:
4
Number of earth leakage circuit breakers:
0
Number of earth leakage switches 30 mA:
2
Number of earth leakage switches 300 mA:
0
Number of arc fault detection devices AFDD:
Number of earth leakage circuit breakers/AFDD:
Protection main switch:
Number of poles main switch:
2
Main switch rated current:
40 A
Protection incoming RCD:
Protection high integrity:
Protection split load:
Protection dual RCD:
Number of outgoing ways:
Suitable for data:
Cooker group:
None
Cooker group suitable as power current group:
With socket outlet:
No
With bell transformer:
No
Overvoltage protection:
No
Type of overvoltage protection device:
Outgoing connections with connectors for plug-in building installation:
With meter:
With N-disconnect slide:
Connection type:
Housing material:
Plastic
Degree of protection (IP):
IP2XC
Height:
250 mm
Built-in height:
Width:
220 mm
Built-in width:
Width in number of modular spacings:
12
Depth:
110 mm
Built-in depth:
Extension possible:
No
Type of covering:
With transparent cover:
No
Type of closure:
Lockable:
No
Colour:
RAL-number:
Dimensions / Form
- Product width:
- 220 mm
- Product depth:
- 250 mm
Electrical Properties
- Rated current:
- 40 A
- Number of residual current circuit breakers 2P:
- 2
- Total number of circuit breakers:
- 4
- Main switch (xxA):
- 40 A
- Connection (1/3-phase):
- 1-phase
- Grey groups:
- 2