Click-mate NXT | Pluggable distribution boards

Click-mate NXT | Pluggable distribution boards

The group boxes for "pluggable installation" are equipped with an output bridge with (optional) Wieland GST18 or WAGO Winsta Midi connectors. The fully pre-wired pluggable output bridge can be fitted with a maximum of 9 to 13 connectors for 1-phase end groups. Connections for electric cooking, mechanical ventilation or power groups have also been taken into account: space has been reserved in the output bridge for a maximum of 2 to 4 pieces of 5-pole connectors. All connectors are pre-wired with 2.5 mm² and fitted with locking as standard. Almost all "traditional" group boxes can be equipped with a fully pre-wired pluggable output bridge with Wieland GST18 or WAGO Winsta Midi connectors. Just like the standard group boxes, the pluggable group boxes are also fully assembled by Attema within a few days according to your wishes. If you are looking for a different configuration, you can put together your own pluggable group box in no time at all.
ETIM Product Classification:
Small distribution board equipped
Mounting method: Surface mounted
Number of rows:
Number of phases: 1
Protection: Miniature-/earth leakage circuit breaker
Number of single-phase miniature circuit breakers (MCB):
Number of three-phase miniature circuit breakers (MCB):
Release characteristic:
Rated short-circuit breaking capacity Icn according to EN 60898 at 230 V:
Power consumption:
Total number of groups: 4
Number of direct groups: 0
Number of light groups: 4
Number of groups behind earth leakage switch: 4
Number of earth leakage circuit breakers: 0
Number of earth leakage switches 30 mA: 2
Number of earth leakage switches 300 mA: 0
Number of arc fault detection devices AFDD: 0
Number of earth leakage circuit breakers/AFDD:
Protection main switch: No
Number of poles main switch: 2
Main switch rated current: 40 A
Protection incoming RCD: No
Protection high integrity: No
Protection split load: No
Protection dual RCD: No
Number of outgoing ways: 4
Suitable for data: No
Cooker group: None
Cooker group suitable as power current group: No
With socket outlet: No
With bell transformer: No
Overvoltage protection: No
Type of overvoltage protection device:
Outgoing connections with connectors for plug-in building installation:
With meter: No
With N-disconnect slide:
Connection type:
Housing material: Plastic
Degree of protection (IP): IP20
Height: 250 mm
Built-in height:
Width: 220 mm
Built-in width:
Width in number of modular spacings: 12
Depth: 110 mm
Built-in depth:
Extension possible: No
Type of covering:
With transparent cover: No
Type of closure:
Lockable: No
Colour:
RAL-number:

Dimensions / Form

Product width:
220 mm
Product depth:
250 mm

Electrical Properties

Rated current:
40 A
Number of residual current circuit breakers 2P:
2
Total number of circuit breakers:
4
Main switch (xxA):
40 A
Connection (1/3-phase):
1-phase
Grey groups:
2
Installation instructions
130.6 KB | 23/05/2025
Brochure
7.6 MB