Our company
Service
Media library
News
Contact
KAISER GROUP
Return
Cable-mate® cableboxes for dry indoor use
- Provides closure of lead-ins on the AK2-SU junction box that have been broken out but will not be used. - Can be punctured to allow lead-in of thin cables < Ø 10 mm.
- Provides closure of lead-ins on the AK2-SU junction box that have been broken out but will not be used. - Can be punctured to allow lead-in of thin cables < Ø 10 mm.
1 / 2
- Provides closure of lead-ins on the AK2-SU junction box that have been broken out but will not be used. - Can be punctured to allow lead-in of thin cables < Ø 10 mm.
- Provides closure of lead-ins on the AK2-SU junction box that have been broken out but will not be used. - Can be punctured to allow lead-in of thin cables < Ø 10 mm.
  • Provides closure of lead-ins on the AK2-SU junction box that have been broken out but will not be used.
  • Can be punctured to allow lead-in of thin cables < Ø 10 mm.
Read more Read less

Slide-in cover grey (RAL 7037)

Attema B.V.
Article number:: AT3958
EAN: 8712259334578
Halogen-free
Halogen-free: Yes
Packaging quantity: 50
View more product data
Datasheet (PDF)

Cable-mate® cableboxes for dry indoor use

Cable-mate® is the innovative, award-winning cable box system that excels in terms of time savings and ease of installation. There is a wide selection of versatile cover material that can be attached to the cable box easily, without screws. The completely renovated raceway click attachment system makes rapid installation possible on all common raceways.

Technical information

Modular AK2 Kit. Individually combinable distributor housings. System of housing base, front part and mounting adapter
Modular AK2 Kit. Individually combinable distributor housings. System of housing base, front part and mounting adapter
Push the AT2252 housing base onto the selected mounting adapter until it snaps in.
Push the AT2252 housing base onto the selected mounting adapter until it snaps in.
Remove the KBS cable entries, break out the pre-stamped cutout at the desired location and insert the KBS.
Remove the KBS cable entries, break out the pre-stamped cutout at the desired location and insert the KBS.
Front part AK2-W5 enables the assembly with up to 5 connectors with 3 to 5 poles.
Front part AK2-W5 enables the assembly with up to 5 connectors with 3 to 5 poles.
ETIM Product Classification:
Plug for cable screw gland
Thread type:
Nominal thread size metric/PG:
Nominal thread size inch/gas pipe thread:
Pitch thread:
Material: Plastic
Material quality: Other
Surface protection: Untreated
Halogen free: No
Glass-fibre reinforced: No
Shock resistant: No
Colour: Grey
RAL-number:
Explosion-tested version:
Suitable for Ex-zone gas:
Suitable for Ex-zone dust:
Working temperature:
Pressure-compensating:

Safety / Properties

Halogen-free:
Yes