Z25 and F25 are the surface-mounted systems for installation-friendly data cabling. Thanks to the smart accessories, the entire contents of the tubes can be used for data cables up to Ø 10 mm. The handy connectors, branch pieces and end pieces ensure a neat finish.
Attachments
1 /
2
Tee/branch connector F25T cream (RAL 1013), LSZH
similar
Tee/branch connector F25T white (RAL 9010)
Article number:
AT5625
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- For use as branch connector to two sides by breaking out the straight-through port in the middle of the guide piece and cover.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Tee/branch connector F25T cream (RAL 1013)
Article number:
AT5605
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- For use as branch connector to two sides by breaking out the straight-through port in the middle of the guide piece and cover.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Attachments
ETIM Product Classification:
Tee for installation duct
Tee for installation duct
Height:
13 mm
Width:
25 mm
Outgoing height:
Outgoing width:
Model:
Base unit and cover
Material:
Plastic
Material quality:
Other
Halogen free:
No
Anti-bacterial treatment:
No
Surface protection:
Untreated
Suitable for circuit integrity:
Type of fastening:
Snap on
Colour:
White
RAL-number:
1.013
With protective foil:
No
Degree of protection (IP):
Impact strength:
Working temperature:
Safety / Properties
- Halogen-free:
- Yes
Tee/branch connector F25T white (RAL 9010)
Article number:
AT5625
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- For use as branch connector to two sides by breaking out the straight-through port in the middle of the guide piece and cover.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.
Tee/branch connector F25T cream (RAL 1013)
Article number:
AT5605
- With special guide piece to bend entire conduit content around corner, with minimal radius of 25 mm.
- For use as branch connector to two sides by breaking out the straight-through port in the middle of the guide piece and cover.
- Temporary mounting using click attachment to Z25 / F25 conduit. Definitive mounting by means of retaining collars under cover.
- Overlaps the cover 5 mm. It is unnecessary to cut perfectly square at exactly the right length.