Our company
Service
Media library
News
Contact
KAISER GROUP
Return
Installation housing ThermoX® LED
- for rigid and pivoting LED luminaires - circumferential airtight sealing lip - Swivel trough for alignment of the luminaire
Open Cadenas Modal
  • for rigid and pivoting LED luminaires
  • circumferential airtight sealing lip
  • Swivel trough for alignment of the luminaire

Installation housing, for hollow ceiling installation.
Installation housing, designed as an installation housing for front installation in insulated hollow ceilings, made of plastic, with air-tight design in accordance with DIN 18015-5, for the installation of rigid and swivelling LED built-in luminaires.
Exit opening max. diameter 70 mm
(for square or rectangular cut-outs, diagonal max. 70 mm
Light installation height max. 60 mm
Installation opening Ø 74 mm, depth 75 mm.
Lamp power max. 6.6 W
Read more Read less

ThermoX® LED housing

Kaiser GmbH & Co.KG
Article number:: 9320-10
EAN: 4013456544628
Product depth: 75 mm
Installation opening (wall/ceiling) Ø: 70 mm
Power consumption in housing LED: 6.6 W
Packaging quantity: 10
View more product data
Datasheet (PDF)

similar

- for rigid and pivoting LED luminaires - circumferential airtight sealing lip - Swivel trough for alignment of the luminaire
ThermoX® LED housing
Article number: 9320-11
  • for rigid and pivoting LED luminaires
  • circumferential airtight sealing lip
  • Swivel trough for alignment of the luminaire
Read more
- for rigid and pivoting LED luminaires - circumferential airtight sealing lip - Swivel trough for alignment of the luminaire
ThermoX® LED housing
Article number: 9320-20
  • for rigid and pivoting LED luminaires
  • circumferential airtight sealing lip
  • Swivel trough for alignment of the luminaire
Read more
- for rigid and pivoting LED luminaires - circumferential airtight sealing lip - Swivel trough for alignment of the luminaire
ThermoX® LED housing
Article number: 9320-21
  • for rigid and pivoting LED luminaires
  • circumferential airtight sealing lip
  • Swivel trough for alignment of the luminaire
Read more

Installation housing ThermoX® LED

ThermoX® LED installation housing for the airtight installation of rigid and pivoting LED built-in luminaires in different ceiling constructions. The housing protects the surrounding material (vapour barrier foil, insulation etc.) against the high operating temperatures and the LED luminairesthemselves from contamination, and creates an airtight separation. In combination with the thermal separation between luminaire and operating device, in this way a maximum operating lifetime is obtained.
  • For installation in insulated hollow ceilings
  • Retrofitting from underneath
  • Toolless installation of the housing
  • Guarantees airtight installation
  • Rear surface structure ensures optimal heat management
  • Permanent and secure retention of the luminaire in the housing

Examples of use

ThermoX® LED installation housings can be installed in seamless sub-ceiling constructions made of plywood...
ThermoX® LED installation housings can be installed in seamless sub-ceiling constructions made of plywood...
...MdF board,...
...MdF board,...
...slab ceilings with single battens with overlying insulation...
...slab ceilings with single battens with overlying insulation...
...and installing plasterboard.
...and installing plasterboard.

Temperature profiles ThermoX® LED (room temperature 25ºC)

ThermoX® LED 9320-10 LED 6.6 W
ThermoX® LED 9320-10 LED 6.6 W
ThermoX® LED 9320-11 LED 9 W
ThermoX® LED 9320-11 LED 9 W
ThermoX® LED 9320-20 LED 8 W
ThermoX® LED 9320-20 LED 8 W
ThermoX® LED 9320-21 LED 10 W
ThermoX® LED 9320-21 LED 10 W

Air-tight installation and fire-preventive protection

The ThermoX® LED housing protects the surrounding material against the extremely high temperatures that may occur during the operation of LED lamps. The housing must be installed without any surrounding insulating material coating. This protective measure can be taken both for new constructions and for retrofitting. The LED housing allows for air-tight installation because it does not destroy the vapour barrier foil that contributes to the air-tight building shell. Because of their air tightness, LED housings are also suitable for use in all suspended ceiling systems where uncontrolled air exchange is to be avoided (e.g. climate or cooling ceilings) and dustproof installation needs to be achieved (e.g. prevention of dust particles due to material removal).

Installation

Make cut opening (e.g. cutter PROFI, Art. No. 1081-20).
Make cut opening (e.g. cutter PROFI, Art. No. 1081-20).
To enlarging existing installation openings from Ø 68 mm to Ø 74 mm using centering insert (Art. No. 1083-99).
To enlarging existing installation openings from Ø 68 mm to Ø 74 mm using centering insert (Art. No. 1083-99).
Installation of the operating device (driver).
Installation of the operating device (driver).
Feed connector from below through the entry of the LED installation housing.
Feed connector from below through the entry of the LED installation housing.
Connection of the plug-in contacts. Feed the sealing element round the cable and insert into the opening.
Connection of the plug-in contacts. Feed the sealing element round the cable and insert into the opening.
Installation of the ThermoX® LED housing in the installation opening.
Installation of the ThermoX® LED housing in the installation opening.
Inserting the spotlight into the housing.
Inserting the spotlight into the housing.
Rear surface structure minimises pressure on the vapour barrier and ensures optimal heat dissipation.
Rear surface structure minimises pressure on the vapour barrier and ensures optimal heat dissipation.

Technical processing instructions/standards

  • use only certified (EN 60598) luminaires which are suitable for direct installation on normally flammable materials

Processing instructions

Guaranteed air tightness even when the fixing springs are expanded.
Guaranteed air tightness even when the fixing springs are expanded.
Expanding pockets ensure secure fit for the built-in luminaire.
Expanding pockets ensure secure fit for the built-in luminaire.
Swivel pocket permits targeted alignment of the built-in luminaire
Swivel pocket permits targeted alignment of the built-in luminaire
For ceiling-flush installation of ThermoX® LED (DA 86), use bi-metal cutter Ø 86 mm (Art. No. 1084-86).
For ceiling-flush installation of ThermoX® LED (DA 86), use bi-metal cutter Ø 86 mm (Art. No. 1084-86).

Installation notes

Art. No. 9320-10 ThermoX® LED, Ø 74 x 75 mm
Art. No. 9320-10 ThermoX® LED, Ø 74 x 75 mm
Art. No. 9320-11 ThermoX® LED, Ø 74 x 95 mm
Art. No. 9320-11 ThermoX® LED, Ø 74 x 95 mm
Art. No. 9320-20 ThermoX® LED, Ø 86 x 75 mm
Art. No. 9320-20 ThermoX® LED, Ø 86 x 75 mm
Art. No. 9320-10 ThermoX® LED, Ø 86 x 95 mm
Art. No. 9320-10 ThermoX® LED, Ø 86 x 95 mm

Air-tightness certificate

Guaranteed airtight housing for the energy-efficient electrical installation of luminaires. The appropriate certificate can be obtained from us or downloaded from our website.
ETIM Product Classification:
Accessories/spare parts for junction boxes/cases for mounting in the wall
Type of accessory/spare part: Other
Accessory: No
Spare part:
Suitable for built-in installation box: No
Suitable for central conduit box: No

Dimensions / Form

Product depth:
75 mm
Installation opening (wall/ceiling) Ø:
70 mm

Installationdetails

Assembly type:
HW (drywall/lightweight construction), hollow ceiling

Safety / Properties

Power consumption in housing LED:
6.6 W
Special application:
air-tight
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
- for rigid and pivoting LED luminaires - circumferential airtight sealing lip - Swivel trough for alignment of the luminaire
ThermoX® LED housing
Article number: 9320-11
  • for rigid and pivoting LED luminaires
  • circumferential airtight sealing lip
  • Swivel trough for alignment of the luminaire
Read more
- for rigid and pivoting LED luminaires - circumferential airtight sealing lip - Swivel trough for alignment of the luminaire
ThermoX® LED housing
Article number: 9320-20
  • for rigid and pivoting LED luminaires
  • circumferential airtight sealing lip
  • Swivel trough for alignment of the luminaire
Read more
- for rigid and pivoting LED luminaires - circumferential airtight sealing lip - Swivel trough for alignment of the luminaire
ThermoX® LED housing
Article number: 9320-21
  • for rigid and pivoting LED luminaires
  • circumferential airtight sealing lip
  • Swivel trough for alignment of the luminaire
Read more