The Consolidation Box from Attema makes it possible to install ICT cabling in a flexible manner, because the installation is divided into two steps. The largest portion of the work takes place during the rough construction, at the same time as the other cabling is installed in the building. As a result, you only have to install a small portion of the ICT cabling during the finishing phase. The Consolidation Box complies with the installation standards of EIA/TIA 568A/B, ISO 11801 and NEN-EN 50173.
Consolidation Box
AK2 Data front part for max. 4 modules
Product length:
125 mm
Product width:
100 mm
Product depth:
60 mm
Halogen-free:
Yes
Packaging quantity:
25
accessories
Adapter C, Keystone type
Article number:
AT1976
- Adapter for mounting in the AK2-D lid of an RJ45 connector from 3M, Krone, Siemon, Radial and others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
Blanking plug
Article number:
AT1970
- Blind cover for sealing an open break-out port in the AK2-D cover after a change or a mistake.
- Blind cover for sealing an open break-out port in the Patch Cabinet after a change or a mistake.
- The blind cover is used to seal any opening behind the dust cap in the Universal Data Box.
Adapter A, CommScope Systimax type
Article number:
AT1972
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Avaya-Systimax (see selection table on the website).
- Version 'AL' has a label window for applying a coding strip.
Adapter AL, CommScope Systimax type with label window
Article number:
AT1973
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Avaya-Systimax (see selection table on the website).
- Version 'AL' has a label window for applying a coding strip.
Adapter B, 20.4 x 14.9 mm type
Article number:
AT1974
- Adapter for mounting in the AK2-D lid of an RJ45 connector from AMP-Tyco, Brand-rex and Nexans, among others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
Adapter BL, 20.4 x 14.9 mm type with label window
Article number:
AT1975
- Adapter for mounting in the AK2-D lid of an RJ45 connector from AMP-Tyco, Brand-rex and Nexans, among others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
Adapter CL, Keystone type with label window
Article number:
AT1977
- Adapter for mounting in the AK2-D lid of an RJ45 connector from 3M, Krone, Siemon, Radial and others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
Adapter I+, Infra Plus type
Article number:
AT1979
- Adapter for attachment of an InfraPlus RJ45 connector in the Universal Data Box, Patch Cabinet or the AK2-D cover.
Adapter RM, Reichle & De-Massari type
Article number:
AT1980
- Adapter for attachment of a Reichle & DeMassari RJ45 connector in the Universal Data Box, Patch Cabinet or the AK2-D cover.
Adapter L, LexCom type
Article number:
AT1986
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
Adapter LL, LexCom type with label window
Article number:
AT1987
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
Adapter PL, Panduit type with label window
Article number:
AT1989
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Panduit (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
Consolidation Box
ETIM Product Classification:
Cover for box/housing for surface mounting on the wall/ceiling
Cover for box/housing for surface mounting on the wall/ceiling
Diameter:
Length:
125 mm
Width:
100 mm
Depth:
60 mm
Shape:
Rectangular
Type of fastening:
Click
Model:
Suitable for data link
Colour:
Grey
Transparent:
No
RAL-number:
1.013
With connection cable:
No
Number of socket outlets:
Number of 3-pole connectors:
0
Number of 4-pole connectors:
0
Number of 5-pole connectors:
0
Outgoing connections with connectors for plug-in building installation:
Degree of protection (IP):
IP40
Degree of protection (NEMA):
Dimensions / Form
- Product length:
- 125 mm
- Product width:
- 100 mm
- Product depth:
- 60 mm
Safety / Properties
- Halogen-free:
- Yes
Certificates & Quality marks
- VDE:
- Yes
Adapter C, Keystone type
Article number:
AT1976
- Adapter for mounting in the AK2-D lid of an RJ45 connector from 3M, Krone, Siemon, Radial and others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
Blanking plug
Article number:
AT1970
- Blind cover for sealing an open break-out port in the AK2-D cover after a change or a mistake.
- Blind cover for sealing an open break-out port in the Patch Cabinet after a change or a mistake.
- The blind cover is used to seal any opening behind the dust cap in the Universal Data Box.
Adapter A, CommScope Systimax type
Article number:
AT1972
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Avaya-Systimax (see selection table on the website).
- Version 'AL' has a label window for applying a coding strip.
Adapter AL, CommScope Systimax type with label window
Article number:
AT1973
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Avaya-Systimax (see selection table on the website).
- Version 'AL' has a label window for applying a coding strip.
Adapter B, 20.4 x 14.9 mm type
Article number:
AT1974
- Adapter for mounting in the AK2-D lid of an RJ45 connector from AMP-Tyco, Brand-rex and Nexans, among others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
Adapter BL, 20.4 x 14.9 mm type with label window
Article number:
AT1975
- Adapter for mounting in the AK2-D lid of an RJ45 connector from AMP-Tyco, Brand-rex and Nexans, among others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
Adapter CL, Keystone type with label window
Article number:
AT1977
- Adapter for mounting in the AK2-D lid of an RJ45 connector from 3M, Krone, Siemon, Radial and others (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.
Adapter I+, Infra Plus type
Article number:
AT1979
- Adapter for attachment of an InfraPlus RJ45 connector in the Universal Data Box, Patch Cabinet or the AK2-D cover.
Adapter RM, Reichle & De-Massari type
Article number:
AT1980
- Adapter for attachment of a Reichle & DeMassari RJ45 connector in the Universal Data Box, Patch Cabinet or the AK2-D cover.
Adapter L, LexCom type
Article number:
AT1986
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
Adapter LL, LexCom type with label window
Article number:
AT1987
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
Adapter PL, Panduit type with label window
Article number:
AT1989
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Panduit (see selection table on the website).
- Version 'L' has a label window for attaching an encoder strip.