The Consolidation Box from Attema makes it possible to install ICT cabling in a flexible manner, because the installation is divided into two steps. The largest portion of the work takes place during the rough construction, at the same time as the other cabling is installed in the building. As a result, you only have to install a small portion of the ICT cabling during the finishing phase. The Consolidation Box complies with the installation standards of EIA/TIA 568A/B, ISO 11801 and NEN-EN 50173.
Adapters
1 /
2
Adapter L, LexCom type
Product length:
28.5 mm
Product width:
27 mm
Product depth:
10.3 mm
Halogen-free:
Yes
Packaging quantity:
100
recommendations
AK2 Data front part for max. 6 modules
Article number:
AT1964
- Raised AK2 cover equipped with 6 knock-out ports for the placement of adapters.
- The adapter allows attachment of any brand or type of RJ45 connector and can be ordered separately.
- The cover has provisions along the edge to allow easy labelling.
AK2 Data front part for max. 4 modules
Article number:
AT1965
- Raised AK2 cover equipped with 4 knock-out ports for the placement of adapters.
- The adapter allows attachment of almost any brand or type of RJ45 connector and can be ordered separately.
- The cover has provisions along the edge to allow easy labelling.
similar
Adapter LL, LexCom type with label window
Article number:
AT1987
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
Adapter L, type Lexcom zwart
Article number:
AT1986.01
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
Adapters
ETIM Product Classification:
Insert/cover for communication technology
Insert/cover for communication technology
Assembly arrangement:
Modular device for domestic switching devices
Utilization:
Modular Jack
Support ring:
No
With dust cover:
No
With hinged lid:
No
Outlet direction:
Straight
Contact type:
Imprintable label:
Without indication field
With imprint:
No
Mounting method:
Module frame
Material:
Plastic
Material quality:
Thermoplastic
Halogen free:
No
Anti-bacterial treatment:
No
Surface protection:
Untreated
Surface finishing:
Matt
Colour:
Grey
RAL-number (similar):
7.035
Transparent:
No
Type of fastening:
Engage (snap)
Number of modules (module system):
1
With buses/couplings:
Suitable for number of connectors:
1
Isolated connections:
With strain relief:
No
Shielded buses:
No
Shielded housing:
No
Luster terminal:
No
With lighting:
No
Suitable for degree of protection (IP):
IP20
Impact strength:
Device width:
27 mm
Device height:
28,4 mm
Device depth:
10 mm
Min. depth of built-in installation box:
Dimensions / Form
- Product length:
- 28.5 mm
- Product width:
- 27 mm
- Product depth:
- 10.3 mm
Safety / Properties
- Halogen-free:
- Yes
AK2 Data front part for max. 6 modules
Article number:
AT1964
- Raised AK2 cover equipped with 6 knock-out ports for the placement of adapters.
- The adapter allows attachment of any brand or type of RJ45 connector and can be ordered separately.
- The cover has provisions along the edge to allow easy labelling.
AK2 Data front part for max. 4 modules
Article number:
AT1965
- Raised AK2 cover equipped with 4 knock-out ports for the placement of adapters.
- The adapter allows attachment of almost any brand or type of RJ45 connector and can be ordered separately.
- The cover has provisions along the edge to allow easy labelling.
Adapter LL, LexCom type with label window
Article number:
AT1987
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.
Adapter L, type Lexcom zwart
Article number:
AT1986.01
- Adapter for mounting in the AK2-D cover of an RJ45 connector from Lexcom (see selection table on the website).
- The 'LL' version has a label window for attaching a coding strip.