Cable-mate® cableboxes for dry indoor use

recommendations

Pluggable AK2 front part, Wieland GST18, out: 2x5pin DALI blue
Article number: AT6510
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, Wieland GST18, out: 3x5pin DALI blue
Article number: AT6328
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, Wieland GST18, out: 4x5pin DALI blue
Article number: AT6504
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, WAGO WINSTA® MIDI, out: 2x5pin DALI blue
Article number: AT7739
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, WAGO WINSTA® MIDI, out: 3x5pin DALI blue
Article number: AT7746
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, WAGO WINSTA® MIDI, out: 4x5pin DALI blue
Article number: AT7752
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²

Cable-mate® cableboxes for dry indoor use

Cable-mate® is the innovative, award-winning cable box system that excels in terms of time savings and ease of installation. There is a wide selection of versatile cover material that can be attached to the cable box easily, without screws. The completely renovated raceway click attachment system makes rapid installation possible on all common raceways.

Technical information

Modular AK2 Kit. Individually combinable distributor housings. System of housing base, front part and mounting adapter
Modular AK2 Kit. Individually combinable distributor housings. System of housing base, front part and mounting adapter
Push the AT2252 housing base onto the selected mounting adapter until it snaps in.
Push the AT2252 housing base onto the selected mounting adapter until it snaps in.
Remove the KBS cable entries, break out the pre-stamped cutout at the desired location and insert the KBS.
Remove the KBS cable entries, break out the pre-stamped cutout at the desired location and insert the KBS.
Front part AK2-W5 enables the assembly with up to 5 connectors with 3 to 5 poles.
Front part AK2-W5 enables the assembly with up to 5 connectors with 3 to 5 poles.
ETIM Product Classification:
Box/housing for surface mounting on the wall/ceiling
Model:
Equipped with: Mounting plate
Max. conductor cross section: 6 mm²
Number of poles:
Number of clamp positions per pole:
Shape: Rectangular
Mounting method: On cable tray
Mounting in the soil: No
Mounting under water: No
Suitable for tube diameter: 16 mm
Number of inlets: 10
Inlet from the rear: No
Length: 120 mm
Width: 95 mm
Depth: 40 mm
Diameter:
Number of cable glands included:
Connectable: No
Type of housing feed-through: Preembossing
With strain relief:
Material: Plastic
Halogen free: No
Surface protection: Untreated
Colour: Grey
RAL-number (similar):
Degree of protection (IP): IP40
Degree of protection (NEMA):
Cover model: None
Outgoing connections with connectors for plug-in building installation:
Transparent cover: No
Castable: No
Cover attachment: Snapped on
Casting compound included: No
Sealable: No
Rated insulation voltage Ui: 690 V
Circuit integrity: None
With screening: No
Weatherproof: No
Working temperature: -40 - 70 °C
Explosion-tested version: No
Suitable for Ex-zone gas: None
Suitable for Ex-zone dust: None

Dimensions / Form

Product length:
120 mm
Product width:
95 mm
Product depth:
40 mm

Connections / Entries

Number of entries:
10
For conduit Ø:
16 mm

Installationdetails

Fastening type (other):
Hole matrix

Safety / Properties

Halogen-free:
Yes

Certificates & Quality marks

VDE:
Yes

Storage / Installation / Operation

Minimum operating temperature:
-40 °C
Maximum operating temperature:
70 °C
Pluggable AK2 front part, Wieland GST18, out: 2x5pin DALI blue
Article number: AT6510
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, Wieland GST18, out: 3x5pin DALI blue
Article number: AT6328
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, Wieland GST18, out: 4x5pin DALI blue
Article number: AT6504
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, WAGO WINSTA® MIDI, out: 2x5pin DALI blue
Article number: AT7739
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, WAGO WINSTA® MIDI, out: 3x5pin DALI blue
Article number: AT7746
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, WAGO WINSTA® MIDI, out: 4x5pin DALI blue
Article number: AT7752
  • For DALI controlled lighting.
  • Equipped with VD wire 2.5 mm².
  • All connectors are equiped with locking.
  • Prefabricated with connection wires 2.5 mm²