Cable-mate® is the innovative, award-winning cable box system that excels in terms of time savings and ease of installation. There is a wide selection of versatile cover material that can be attached to the cable box easily, without screws. The completely renovated raceway click attachment system makes rapid installation possible on all common raceways.
Cable-mate® cableboxes for dry indoor use
1 /
2
Pluggable AK2 front part, WAGO WINSTA® MIDI, out: 2x5pin DALI blue
Product length:
125 mm
Product width:
100 mm
Product depth:
42 mm
Pre-wiring:
2.5
Connection to wire:
5
Output plug connector:
1
Protection class:
IP20
Packaging quantity:
10
accessories
AK2-S/VK IP40
Article number:
AT2250
- Packed per junction box 3 KBS 16 mm slide inlets and 1 shutter slide.
- Version with flat plastic mounting plate for quick click-mounting on cable trays.
- Matching AK2 front part can be ordered separately.
- Suitable for cable trays from Legrand (Van Geel), Stago, Niedax, Vergokan, PUK and OBO.
- Each article is packaged with 3x KBS 16 mm inlets and 1 locking slider
- Suitable for cable support systems from well-known manufacturers
AK2-S/GZ IP40
Article number:
AT2251
- Packed per junction box 3 KBS 16 mm slide inlets and 1 shutter slide.
- Version with set plastic mounting plate for quick click-mounting on cable trays
- Matching AK2 front part can be ordered separately.
- Suitable for cable trays from Legrand (Van Geel), Stago, Niedax, Vergokan, PUK and OBO.
- Each article is packaged with 3x KBS 16 mm inlets and 1 locking slider
- Suitable for cable support systems from well-known manufacturers
AK2-S/MD cable box for mesh cable trays
Article number:
AT2229
- Packed per junction box 3 KBS 16 mm slide inlets and 1 shutter slide.
- Pre-assembled on plastic mounting plate MD for quick click-connection.
- Matching AK2 front part can be ordered separately.
- Universally applicable for all brands of wire tray.
- Each article is packaged with 3x KBS 16 mm inlets and 1 locking slider
- Suitable for cable support systems from well-known manufacturers
AK2-S/MK Cable box cable duct
Article number:
AT2216
- Packed per junction box 3 KBS 16 mm slide inlets and 1 shutter slide.
- Design with a compact MK assembly plate for quick click-assembly on the side of the cable duct.
- Suitable for all common cable duct brands.
- Can also be fitted underneath some cable ducts.
- Matching AK2 front part can be ordered separately.
- Each article is packaged with 3x KBS 16 mm inlets and 1 locking slider
- Matching AK2 front part can be ordered separately
- Suitable for cable support systems from well-known manufacturers
Cable-mate® cableboxes for dry indoor use
Technical information
ETIM Product Classification:
Cover for box/housing for surface mounting on the wall/ceiling
Cover for box/housing for surface mounting on the wall/ceiling
Diameter:
Length:
125 mm
Width:
100 mm
Depth:
42 mm
Shape:
Rectangular
Type of fastening:
Click
Model:
Suitable for snap-in connector (manufacturer specific)
Colour:
Grey
Transparent:
No
RAL-number:
With connection cable:
No
Number of socket outlets:
Number of 3-pole connectors:
0
Number of 4-pole connectors:
0
Number of 5-pole connectors:
2
Outgoing connections with connectors for plug-in building installation:
Degree of protection (IP):
IP20
Degree of protection (NEMA):
Dimensions / Form
- Product length:
- 125 mm
- Product width:
- 100 mm
- Product depth:
- 42 mm
Electrical Properties
- Pre-wiring:
- 2.5
- Connection to wire:
- 5
- Output plug connector:
- 1
Certificates & Quality marks
- Protection class:
- IP20
AK2-S/VK IP40
Article number:
AT2250
- Packed per junction box 3 KBS 16 mm slide inlets and 1 shutter slide.
- Version with flat plastic mounting plate for quick click-mounting on cable trays.
- Matching AK2 front part can be ordered separately.
- Suitable for cable trays from Legrand (Van Geel), Stago, Niedax, Vergokan, PUK and OBO.
- Each article is packaged with 3x KBS 16 mm inlets and 1 locking slider
- Suitable for cable support systems from well-known manufacturers
AK2-S/GZ IP40
Article number:
AT2251
- Packed per junction box 3 KBS 16 mm slide inlets and 1 shutter slide.
- Version with set plastic mounting plate for quick click-mounting on cable trays
- Matching AK2 front part can be ordered separately.
- Suitable for cable trays from Legrand (Van Geel), Stago, Niedax, Vergokan, PUK and OBO.
- Each article is packaged with 3x KBS 16 mm inlets and 1 locking slider
- Suitable for cable support systems from well-known manufacturers
AK2-S/MD cable box for mesh cable trays
Article number:
AT2229
- Packed per junction box 3 KBS 16 mm slide inlets and 1 shutter slide.
- Pre-assembled on plastic mounting plate MD for quick click-connection.
- Matching AK2 front part can be ordered separately.
- Universally applicable for all brands of wire tray.
- Each article is packaged with 3x KBS 16 mm inlets and 1 locking slider
- Suitable for cable support systems from well-known manufacturers
AK2-S/MK Cable box cable duct
Article number:
AT2216
- Packed per junction box 3 KBS 16 mm slide inlets and 1 shutter slide.
- Design with a compact MK assembly plate for quick click-assembly on the side of the cable duct.
- Suitable for all common cable duct brands.
- Can also be fitted underneath some cable ducts.
- Matching AK2 front part can be ordered separately.
- Each article is packaged with 3x KBS 16 mm inlets and 1 locking slider
- Matching AK2 front part can be ordered separately
- Suitable for cable support systems from well-known manufacturers