Company
Service
Media library
News
Career
Contact
KAISER GROUP
Go back
B² one-gang junction boxes
Open Cadenas Modal
  • for in-factory installation
  • Fixing to the formwork by means of KAISER B² magnet (Art. No. 1261-81)
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
  • 1-piece
Read more Read less

B² one-gang junction box without plaster skin, depth 83.5 mm

Kaiser GmbH & Co.KG
Artikel-No.: 1264-61
EAN: 4013456480742
VDE
OEVE
Product depth: 83.5 mm
Number of entries: 6
For conduit Ø: 32 mm, 40 mm
Cover for box/housing/casing Ø: 60 mm
Shipping: 100
Price (MSRP) / 100 ST:
€335.00
Price group: 140
More product details
Datasheet (PDF)

accessories

NEW
Magnet
Magnet
Artikel-No. 1261-81
  • for clamp attachment in the box
  • for anti-shock fixing of one-gang junction boxes in horizontal formwork
  • Adhesive force of 900 N (90 kg)
  • Magnet remains on the formwork table after formwork removal
  • Centering device for correct positioning during automated production
See more
- Werkzeugloser Rohranschluss an den B² Geräte-Verbindungsdosen - Aufnahme von starren und biegsamen Rohren - Dämpfung der Rohrschwingungen während des Verdichtungsvorgangs - Verhindert das Eindringen der Rohre in die Geräte-Verbindungsdose und vermeiden somit das spätere Rohrkürzen - Art.-Nr. 1261-21 ersetzt Art.-Nr. 1261-20 und Art.-Nr. 1261-26 ersetzt Art.-Nr. 1261-25
Conduit connector for DIN EN conduit Ø 32 mm
Artikel-No. 1261-32
  • Toolless conduit connection to the B² one-gang junction boxes
  • Accepts rigid and flexible conduits
  • Damping of conduit vibrations during the compaction process
  • Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
  • Art.-Nr. 1261-21 replaces Art. No. 1261-20 and Art. No. 1261-26 replaces Art. No. 1261-25
See more
- zum Verbinden aller Geräte-Verbindungsdosen im Mittenabstand von 142 mm - für getrennte Abdeckung z.B. Kleinspannung in Kombinationen mit nicht berührungssicheren Steckdosen - auch für oben liegende Dosen - mit Druckknopfverbindung für Aufstockelemente
Distance piece 142
Artikel-No. 1261-18
  • for connecting to all one-gang junction boxes at 142 mm centre distance
  • for separate covering, e.g. low-voltage in combinations with sockets without electric shock protection
  • also for overhead boxes
  • with push-button connection for extension elements
See more
- zum Aufrasten auf die Geräte-Verbindungsdosen - Schraubenabstand zur Gerätebefestigung 60 mm - mit angespritzter Putzhaut gegen Eindringen von Putzmaterial
Plaster compensation ring
Artikel-No. 1261-60
  • for latching on the one-gang junction box
  • screw distance to accessory fixing 60 mm
  • with moulded-in plaster skin to prevent ingress of cleaning material
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - zur Befestigung auf der Schalung
Abutment without special adhesive
Artikel-No. 1261-11
  • for fitting of overhead one-gang junction boxes at greater heights
  • for fixing to formworks
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - höhenverstellbar um jeweils 5 mm
Universal extension element 105 to 170 mm for glueing
Artikel-No. 1261-06
  • for fitting of overhead one-gang junction boxes at greater heights
  • height adjustable in increments of 5 mm
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - höhenverstellbar um jeweils 5 mm
Universal extension element 175 to 300 mm for glueing
Artikel-No. 1261-07
  • for fitting of overhead one-gang junction boxes at greater heights
  • height adjustable in increments of 5 mm
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - höhenverstellbar um jeweils 5 mm
Universal extension element 105 to 170 mm for push-button fixing
Artikel-No. 1261-08
  • for fitting of overhead one-gang junction boxes at greater heights
  • height adjustable in increments of 5 mm
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - höhenverstellbar um jeweils 5 mm
Universal extension element 175 to 300 mm for push-button fixing
Artikel-No. 1261-09
  • for fitting of overhead one-gang junction boxes at greater heights
  • height adjustable in increments of 5 mm
See more

similar

- zum werkseitigen Einbau - Befestigung an der Schalung mittels KAISER B² Haftmagnet (Art.-Nr. 1261-81) - 4 Schraubdome und 2 Spreizkrallenfelder zur Gerätebefestigung - Norm-Kombinationsabstand 71 mm - 1-teilig
B² one-gang junction box without plaster skin, depth 48.5 mm
Artikel-No. 1262-61
  • for in-factory installation
  • Fixing to the formwork by means of KAISER B² magnet (Art. No. 1261-81)
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
  • 1-piece
See more
- zum werkseitigen Einbau - Befestigung an der Schalung mittels KAISER B² Haftmagnet (Art.-Nr. 1261-81) - 4 Schraubdome und 2 Spreizkrallenfelder zur Gerätebefestigung - Norm-Kombinationsabstand 71 mm - 1-teilig
B² one-gang junction box without plaster skin, depth 68.5 mm
Artikel-No. 1263-61
  • for in-factory installation
  • Fixing to the formwork by means of KAISER B² magnet (Art. No. 1261-81)
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
  • 1-piece
See more

B² one-gang junction boxes

B² system for installation in horizontal precast concrete. All installation requirements can be met with just a few components. The one-gang boxes are self-adhesive and the accessories provide a practical product range.
  • Extremely time-saving
  • One-piece design
  • Available with or without plaster skin
  • Available prefabricated with special glue – no adhesive residues when removing formwork
  • Simple connectors for combinations or opposing boxes

Fixing options

B² one-gang junction boxes with receptacle for KAISER system magnets Art. No. 1299-69.
B² one-gang junction boxes with receptacle for KAISER system magnets Art. No. 1299-69.
B² one-gang junction boxes without plaster skin to accommodate the KAISER B² magnets Art. No. 1261-81.
B² one-gang junction boxes without plaster skin to accommodate the KAISER B² magnets Art. No. 1261-81.
B² one-gang junction boxes with plaster skin for fastening by means of KAISER adhesive foil Art. No. 1219-00...
B² one-gang junction boxes with plaster skin for fastening by means of KAISER adhesive foil Art. No. 1219-00...
...or by means of hot glue.
...or by means of hot glue.

Conduit connectors Ø 20/25 mm

With built-in conduit lock designed especially for corrugated conduits with a diameter of 20/25 mm.
With built-in conduit lock designed especially for corrugated conduits with a diameter of 20/25 mm.
Snap the conduit connector in to the one-gang junction box.
Snap the conduit connector in to the one-gang junction box.
Press the conduit connector downwards and completely punch out the feed-through.
Press the conduit connector downwards and completely punch out the feed-through.
Insert the conduit into the conduit connector.
Insert the conduit into the conduit connector.

Conduit connectors Ø 32/40 mm

With built-in conduit lock designed especially for corrugated conduits with a diameter of 32/40 mm.
With built-in conduit lock designed especially for corrugated conduits with a diameter of 32/40 mm.
Insert the tip of the conduit connector in the marked position.
Insert the tip of the conduit connector in the marked position.
Turn the conduit connector with pressure against the one-gang junction box until the feed-through is cut out.
Turn the conduit connector with pressure against the one-gang junction box until the feed-through is cut out.
Snap-in the conduit connector, insert the conduit into the conduit connector.
Snap-in the conduit connector, insert the conduit into the conduit connector.

Conduit connector 60° / diameter 25 mm

Snap the two halves of the 60° conduit connector together.
Snap the two halves of the 60° conduit connector together.
Pierce the tip of the 60° conduit connector at the desired conduit entry and turn until the feed-through is cut out.
Pierce the tip of the 60° conduit connector at the desired conduit entry and turn until the feed-through is cut out.
Insert the conduit in engaged conduit connector 60°.
Insert the conduit in engaged conduit connector 60°.
3-unit combination with inserted conduits in the wall area.
3-unit combination with inserted conduits in the wall area.

Dimensions / Form

Product depth:
83.5 mm
Cover for box/housing/casing Ø:
60 mm

Connections / Entries

Number of entries:
6
For conduit Ø:
32 mm, 40 mm

Assembly / Installation

Assembly type:
BB (solid construction)

Safety / Properties

Special application:
precast concrete

Approvals / Certifications

VDE:
Yes
Conformity declaration

Declaration of conformity

Accessory box including accessories.
59.2 KB | 19/12/2019
Download
Certificate

Concrete construction boxes - Sound insulation certificate

536.1 KB | 23/01/2023
Download
Electrical installation in concrete construction precast concrete production and prefabricated room modules.
Brochure

Electrical installation in concrete construction precast concrete production and prefabricated room modules.

Boxes, housings and systems.

46.6 MB
B² conduit couplings
Flyer

B² conduit couplings

Process reduction in precast concrete.

651.6 KB
Download
NEW
Magnet
Magnet
Artikel-No. 1261-81
  • for clamp attachment in the box
  • for anti-shock fixing of one-gang junction boxes in horizontal formwork
  • Adhesive force of 900 N (90 kg)
  • Magnet remains on the formwork table after formwork removal
  • Centering device for correct positioning during automated production
See more
- Werkzeugloser Rohranschluss an den B² Geräte-Verbindungsdosen - Aufnahme von starren und biegsamen Rohren - Dämpfung der Rohrschwingungen während des Verdichtungsvorgangs - Verhindert das Eindringen der Rohre in die Geräte-Verbindungsdose und vermeiden somit das spätere Rohrkürzen - Art.-Nr. 1261-21 ersetzt Art.-Nr. 1261-20 und Art.-Nr. 1261-26 ersetzt Art.-Nr. 1261-25
Conduit connector for DIN EN conduit Ø 32 mm
Artikel-No. 1261-32
  • Toolless conduit connection to the B² one-gang junction boxes
  • Accepts rigid and flexible conduits
  • Damping of conduit vibrations during the compaction process
  • Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
  • Art.-Nr. 1261-21 replaces Art. No. 1261-20 and Art. No. 1261-26 replaces Art. No. 1261-25
See more
- zum Verbinden aller Geräte-Verbindungsdosen im Mittenabstand von 142 mm - für getrennte Abdeckung z.B. Kleinspannung in Kombinationen mit nicht berührungssicheren Steckdosen - auch für oben liegende Dosen - mit Druckknopfverbindung für Aufstockelemente
Distance piece 142
Artikel-No. 1261-18
  • for connecting to all one-gang junction boxes at 142 mm centre distance
  • for separate covering, e.g. low-voltage in combinations with sockets without electric shock protection
  • also for overhead boxes
  • with push-button connection for extension elements
See more
- zum Aufrasten auf die Geräte-Verbindungsdosen - Schraubenabstand zur Gerätebefestigung 60 mm - mit angespritzter Putzhaut gegen Eindringen von Putzmaterial
Plaster compensation ring
Artikel-No. 1261-60
  • for latching on the one-gang junction box
  • screw distance to accessory fixing 60 mm
  • with moulded-in plaster skin to prevent ingress of cleaning material
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - zur Befestigung auf der Schalung
Abutment without special adhesive
Artikel-No. 1261-11
  • for fitting of overhead one-gang junction boxes at greater heights
  • for fixing to formworks
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - höhenverstellbar um jeweils 5 mm
Universal extension element 105 to 170 mm for glueing
Artikel-No. 1261-06
  • for fitting of overhead one-gang junction boxes at greater heights
  • height adjustable in increments of 5 mm
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - höhenverstellbar um jeweils 5 mm
Universal extension element 175 to 300 mm for glueing
Artikel-No. 1261-07
  • for fitting of overhead one-gang junction boxes at greater heights
  • height adjustable in increments of 5 mm
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - höhenverstellbar um jeweils 5 mm
Universal extension element 105 to 170 mm for push-button fixing
Artikel-No. 1261-08
  • for fitting of overhead one-gang junction boxes at greater heights
  • height adjustable in increments of 5 mm
See more
- zum Einbau obenliegender Geräte-Verbindungsdosen - höhenverstellbar um jeweils 5 mm
Universal extension element 175 to 300 mm for push-button fixing
Artikel-No. 1261-09
  • for fitting of overhead one-gang junction boxes at greater heights
  • height adjustable in increments of 5 mm
See more
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
- zum werkseitigen Einbau - Befestigung an der Schalung mittels KAISER B² Haftmagnet (Art.-Nr. 1261-81) - 4 Schraubdome und 2 Spreizkrallenfelder zur Gerätebefestigung - Norm-Kombinationsabstand 71 mm - 1-teilig
B² one-gang junction box without plaster skin, depth 48.5 mm
Artikel-No. 1262-61
  • for in-factory installation
  • Fixing to the formwork by means of KAISER B² magnet (Art. No. 1261-81)
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
  • 1-piece
See more
- zum werkseitigen Einbau - Befestigung an der Schalung mittels KAISER B² Haftmagnet (Art.-Nr. 1261-81) - 4 Schraubdome und 2 Spreizkrallenfelder zur Gerätebefestigung - Norm-Kombinationsabstand 71 mm - 1-teilig
B² one-gang junction box without plaster skin, depth 68.5 mm
Artikel-No. 1263-61
  • for in-factory installation
  • Fixing to the formwork by means of KAISER B² magnet (Art. No. 1261-81)
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
  • 1-piece
See more