Central transition casing for universal conduit entries
Article No.
9914.10
- Material: Polyethylene
- Processing temperature: -5 °C / + 60 °C
Screw-on cover (330 x 120 x 5 mm) for Art. No. 9914.10
Article No.
9914.10.02
- Material: Polyethylene
- Processing temperature: -5 °C / + 60 °C
Moisture-proof cover ALU (330 x 120 x 8 mm) for Art. No. 9914.10
Article No.
9914.10.03
- Seal: CR neoprene
Upper frame (308 x 98 x 45 mm) for Art. No. 9914.10
Article No.
9914.10.68
- Material: Polyethylene
- Processing temperature: -5 °C / + 60 °C
Extra-large flush-mounted junction boxes
Article No.
9916.21
- For device screws Ø 3.5 mm
- Max. tightening torque 0.8 Nm
Extra-large flush-mounted junction boxes
Article No.
9917.21
- For device screws Ø 3.5 mm
- Max. tightening torque 0.8 Nm
Waterproof cover
Article No.
9916.03
- Anodised aluminium
- with full neoprene seal
- Cover fixing with enclosed screws, non-rusting
- Max. tightening torque 0.8 Nm
Waterproof cover
Article No.
9917.03
- Anodised aluminium
- with full neoprene seal
- Cover fixing with enclosed screws, non-rusting
- Max. tightening torque 0.8 Nm
Set of 2 Prefix® wing brackets
Article No.
9940.20
- Facilitates fixing to the reinforcement
- For wire-pull casings (Art. No. 9916 and 9917)
Prefix® wing set, 4 pieces for AGRO inlet box 9902.xx
Article No.
9940.25
- Facilitates fixing to the reinforcement
- Fast and easy installation on opposing formwork without support element and abutment
- Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
Prefix® wing set, 12 pieces for AGRO inlet box 9902.xx
Article No.
9940.50
- Facilitates fixing to the reinforcement
- Fast and easy installation on opposing formwork without support element and abutment
- Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
Inlet casing 2x1
Article No.
9902.22
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 3x1
Article No.
9902.23
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 4x1
Article No.
9902.24.40
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 2x2
Article No.
9902.24
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 3x2
Article No.
9902.26
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 4x2
Article No.
9902.28
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm