Inlet casing 2x1
Artikel-No.
9902.22
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 3x1
Artikel-No.
9902.23
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 4x1
Artikel-No.
9902.24.40
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 2x2
Artikel-No.
9902.24
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 3x2
Artikel-No.
9902.26
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 4x2
Artikel-No.
9902.28
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Inlet casing 3x3
Artikel-No.
9902.29
- Compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
One-gang box for Italian and American accessories
Artikel-No.
1200-00
- For 3 modules in monoblock construction (single row)
- Installation opening 60 x 90 mm
One-gang box for British accessories, one-gang
Artikel-No.
1223-41
- Accessories can be aligned at any time by using to M 3.5 slide nuts
- Certified according to BS 4662 standard
One-gang box for British accessories, two-gang
Artikel-No.
1224-41
- Accessories can be aligned at any time by using to M 3.5 slide nuts
- Certified according to BS 4662 standard
Slide nuts for British accessories
Artikel-No.
1224-99
- 2 pieces required per one-gang box
- for clipping into one-gang boxes 1223-41/1224-41
- protected against corrosion
B¹ one-gang box Italian standard with 3 modules
Artikel-No.
1269-03
- For 3 modules in monoblock construction
- Suitable for all types of formwork
- 2-piece with moulded rear part
- Two slots for B¹ Prefix® system wings
- Rear part of box with slot for support element
- Suitable for American accessories
B¹ one-gang box Italian standard with 4 modules
Artikel-No.
1269-04
- For 4 modules in monoblock construction
- Suitable for all types of form-work
- 2-piece with moulded rear part
- Two slots for B¹ Prefix® system wings
- Rear part of box with slot for support element
Prefix® 2.0 concrete construction box 1x1
Artikel-No.
9941
- Compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Prefix® 2.0 concrete construction box 2x1 NUP
Artikel-No.
9941.25
- Compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Prefix® 2.0 concrete construction box 3x1 NUP
Artikel-No.
9941.35
- Compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm