With the EnoX® installation housing, you can create an air-tight installation for luminaires, loudspeakers or displays. Thanks to its integrated strain relief and conduit entries up to Ø 25 mm, it provides a secure foundation.

The one-gang junction box is fitted with clamping ribs for rapid fixing in solid building materials, e.g. OSB panels, gypsum fibreboards or solid timber, with a minimum material thickness of 10 mm; it is air-tight and features toolless electric cable and conduit entries, standard-compliant cable retention and four screw terminals.

The O-range ECON® 3 one-gang junction box enables quick and convenient installation of pre-wired device inserts. Where different voltage types are present, the separator is fitted to ensure standardised electrical circuit separation.

The air-tight component seal ensures convenient in-factory assembly without the need for additional steps on site. Thanks to the 90-degree bend, the cable pull-in can be performed smoothly from both directions without any abutting edges – ideal for front or rear installation in mass-produced wall panels.

The PROFI cutter (Ø 68 mm) with a chamfering edge and a slot for a centering drill is specially designed for the precise and clean milling of installation openings in cavity walls and drywall walls.

For cavity wall installations, the two-gang junction box, with an installation depth of 47 mm and a cut hole of Ø 2x68 mm, provides a reliable basis for electrical installation in drywall.

Thanks to its combination entry for electric cables and conduits, the Orange® equipment connection box is ideal for standardised installation and device mounting, as well as fully insulated through-wiring.

The air-tight wall light connection box with an internal cover is suitable for a standardised cable exit from drywall.

The ceiling luminaire connection box with an integrated M5 metal thread for fitting a light hook (1226-xx) is ideally suited as a connection and connection box for ceiling luminaires.

The ThermoX® LED installation housing enables the air-tight installation of both fixed and swivelling LED luminaires in insulated hollow ceilings. It features a minimum depth of 75 mm (minimum cut hole diameter 74 mm) and a peripheral sealing lip.

The O-range ECON® Universal 120 flush-mounted installation housing provides a universal screw-on surface for the installation of surface-mounted and flush-mounted installation accessories in custom-made round and cornered installation openings and is designed to be air-tight using ECON technology.

The O-range ECON® Data equipment connection box is an air-tight cavity wall solution designed specifically for data and network technology, with an installation depth of 74 mm and a cut hole of Ø 68 mm. It offers toolless electric cable and conduit entry, thus combining convenient installation with optimal data transmission.

With an installation depth of 62 mm and 4 conduit entries, the O-range ECON® air-tight one-gang junction box offers particular flexibility for pipe installation in drywall.

With an installation depth of 75 mm and a flexible cable duct, the O-range ECON® Flex provides ideal space for electronic components and cable reserves. Thanks to its air-tight design with integrated sealing membranes, versatile electric cable and conduit entries, and simple installation, it is perfectly suited to demanding, energy-efficient cavity wall installations.

The O-range ECON® 63 one-gang box stands out thanks to its air-tight wire entries and the innovative conduit entry with an opening tab and an integrated 90° conduit entry elbow.

The air-tight sleeves for interior use enable a reliable, air-tight and flexible feed-through of electric cables and conduits of a wide range of diameters. They ensure a secure sealing operation within the air-tight building shell.