System magnet
Artikel-No.
1299-69
- for accurate positioning during automated or manual production
- with an anti-twist device for one-gang boxes
- adhesive force 500 N (50 kg)
- Can be used for the following articles:
- HaloX® installation housing / item no. 1282-74/-75/-76 and 1283-74/-76
- B² one-gang junction boxes / item no. 1262-06, 1263-06, 1264-06
- 115 large slab ceiling box / item no. 1227-16
- End and transition bushes / item no. 1261-82/-83/-84
- Wall and ceiling transitions 30° / item no. 1261-92/-93/-94
System magnet PLUS
Artikel-No.
1299-70
- for correct positioning during automated production as well as automated removal and storage
- with an anti-twist device for one-gang boxes
- adhesive force 500 N (50 kg)
- Can be used for the following articles:
- HaloX® installation housing / item no. 1282-74/-75/-76 and 1283-74/-76
- B² one-gang junction boxes / item no. 1262-06, 1263-06, 1264-06
- 115 large slab ceiling box / item no. 1227-16
- End and transition bushes / item no. 1261-82/-83/-84
- Wall and ceiling transitions 30° / item no. 1261-92/-93/-94
B² one-gang junction box for system magnet, depth 48.5 mm
Artikel-No.
1262-06
- for in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- 1-piece
- 4 screw domes and 2 expanding claw fields for accessory fitting
- Standardised combination distance 71 mm
B² one-gang junction box for system magnet, depth 68.5 mm
Artikel-No.
1263-06
- for in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- 1-piece
- 4 screw domes and 2 expanding claw fields for accessory fitting
- Standardised combination distance 71 mm
B² one-gang junction box for system magnet, depth 83.5 mm
Artikel-No.
1264-06
- for in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- 1-piece
- 4 screw domes and 2 expanding claw fields for accessory fitting
- Standardised combination distance 71 mm
Conduit connector for DIN EN conduit Ø 20 mm
Artikel-No.
1261-21
- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Art.-Nr. 1261-21 replaces Art. No. 1261-20 and Art. No. 1261-26 replaces Art. No. 1261-25
Conduit connector for DIN EN conduit Ø 25 mm
Artikel-No.
1261-26
- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Art.-Nr. 1261-21 replaces Art. No. 1261-20 and Art. No. 1261-26 replaces Art. No. 1261-25
Conduit connector for DIN EN conduit Ø 32 mm
Artikel-No.
1261-32
- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Art.-Nr. 1261-21 replaces Art. No. 1261-20 and Art. No. 1261-26 replaces Art. No. 1261-25
Conduit connector for DIN EN conduit Ø 40 mm
Artikel-No.
1261-40
- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Art.-Nr. 1261-21 replaces Art. No. 1261-20 and Art. No. 1261-26 replaces Art. No. 1261-25
Conduit connector 90° for DIN EN conduit Ø 20 mm
Artikel-No.
1262-20
- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Easy cable pull-in thanks to optimised 90° conduit elbow
Conduit connector 90° for DIN EN conduit Ø 25 mm
Artikel-No.
1262-25
- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Easy cable pull-in thanks to optimised 90° conduit elbow
Conduit connector 90° for DIN EN conduit Ø 32 mm
Artikel-No.
1262-32
- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Easy cable pull-in thanks to optimised 90° conduit elbow
Conduit transition coupling Ø 32 mm
Artikel-No.
1263-32
- For toolless connection of Ø 32 mm conduits to the B² one-gang junction boxes 1262-XX and 1263-XX
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits from penetrating the B² one-gang junction boxes and thus avoids subsequent conduit shortening
60° conduit connector
Artikel-No.
1266-25
- space-saving entry of conduits in confined spaces, e.g. door and window areas
- for punching out markings without tools
- for fitting flexible 25 mm DIN EN conduits
Large slab ceiling box 115
Artikel-No.
1227-16
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Installation height 115 mm, with M5 metal nut for light hook (min. hook length: 115 mm + plaster thickness)
- With closing cover for on-site fitting of conduits
- Maximum light hook load according to DIN EN 60670 100 N (10 kg)
End and transition grommet, Ø 20 mm
Artikel-No.
1261-82
- For connecting conduits at transition points
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Large adhesive surface
- For overhead installation in solid walls
- With closing cover to prevent ingress of foreign bodies
- Combinable end and transition grommets and wall and 30° ceiling transition
- Two slots for Prefix® system accessories
- Suitable for all types of formwork
- Two nail domes
End and transition grommet, Ø 25 mm
Artikel-No.
1261-83
- For connecting conduits at transition points
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Large adhesive surface
- For overhead installation in solid walls
- With closing cover to prevent ingress of foreign bodies
- Combinable end and transition grommets and wall and 30° ceiling transition
- Two slots for Prefix® system accessories
- Suitable for all types of formwork
- Two nail domes
End and transition grommet, Ø 32 mm
Artikel-No.
1261-84
- For connecting conduits at transition points
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Large adhesive surface
- For overhead installation in solid walls
- With closing cover to prevent ingress of foreign bodies
- Combinable end and transition grommets and wall and 30° ceiling transition
- Two slots for Prefix® system accessories
- Suitable for all types of formwork
- Two nail domes
Wall and ceiling bend 30° Ø 20 mm
Artikel-No.
1261-92
- For connecting conduits at transition points
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Large adhesive surface
- For overhead installation in solid walls
- With closing cover to prevent ingress of foreign bodies
- Combinable end and transition grommets and wall and 30° ceiling transition
- Two slots for Prefix® system accessories
- Suitable for all types of formwork
- Two nail domes
Wall and ceiling bend 30° Ø 25 mm
Artikel-No.
1261-93
- For connecting conduits at transition points
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Large adhesive surface
- For overhead installation in solid walls
- With closing cover to prevent ingress of foreign bodies
- Combinable end and transition grommets and wall and 30° ceiling transition
- Two slots for Prefix® system accessories
- Suitable for all types of formwork
- Two nail domes
Wall and ceiling bend 30° Ø 32 mm
Artikel-No.
1261-94
- For connecting conduits at transition points
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Large adhesive surface
- For overhead installation in solid walls
- With closing cover to prevent ingress of foreign bodies
- Combinable end and transition grommets and wall and 30° ceiling transition
- Two slots for Prefix® system accessories
- Suitable for all types of formwork
- Two nail domes
Wall and ceiling transition 90° Ø 20 mm
Artikel-No.
1261-95
- For connecting conduits at transition points
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Large adhesive surface
- Ideally suited for the construction of a rigid conduit system
- For overhead installation in solid walls
- With closing cover to prevent ingress of foreign bodies
- Can be combined with end and transition grommets and 30° wall and ceiling bends
- Two slots for Prefix® system accessories
- Suitable for all types of formwork
- Two nail domes
Wall and ceiling transition 90° Ø 25 mm
Artikel-No.
1261-96
- For connecting conduits at transition points
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Large adhesive surface
- Ideally suited for the construction of a rigid conduit system
- For overhead installation in solid walls
- With closing cover to prevent ingress of foreign bodies
- Can be combined with end and transition grommets and 30° wall and ceiling bends
- Two slots for Prefix® system accessories
- Suitable for all types of formwork
- Two nail domes