Conceived by tradespeople, crafted by KAISER!
For over 120 years, KAISER has stood for pioneering innovations in flush-mounting installation. What began with Baktylamid boxes and the legendary Protektor has, over the decades, developed into a standard that has become an indispensable part of everyday electrical installation work. Today, our UP1 range marks the next milestone – and sets the new standard for flush-mounting installation.
Whether it’s traditional installation with plaster, an air-tight seal or quick, clean installation using innovative ribs – the UP1 range offers maximum flexibility for every requirement on site. Well-thought-out features such as through-wiring, 4-3-way screw domes or up to 25% more installation volume make all the difference – noticeable in practice, with impressive results.
With the UP1 range, electricians experience a level of convenience in flush-mounting that has never been achieved before – designed to meet the demands of today and tomorrow.
The new standard in flush-mounting
Flush-mounting boxes are part of KAISER’s DNA. The revamp of our flush-mounting range also marks a major milestone in KAISER’s history, which now spans more than 120 years.
KAISER flush-mounting installation – For 120 years and into the future
UP¹ - the new standard.
The ideal solution for every construction site.
Whatever challenges lie ahead on the construction site – the UP¹ range offers the right solution.
Our boxes for installation in plaster
Tried-and-tested products with new features!
KAISER explains – UP¹ and UP¹ ECON® flush-mounting boxes for plasterboard installation
UP¹ and UP¹ ECON® – All the benefits at a glance
Our boxes for installation with ribs
Installation requires no plaster or PU foam whatsoever
KAISER explains - Flush-mounting boxes UP¹ Fix and UP¹ ECON® Fix for terminal mounting
UP¹ Fix – plaster and foam-free installation with clamping ribs
UP¹ ECON® Fix one-gang box
Artikel-No.
1055-26
- More volume than conventional one-gang boxes
- With quick fixing for installation without plaster
- With 4 x 3 screw domes
- Side-neutral combination
- Many through-wiring possibilities
- Standardised combination distance 71 mm
UP¹ ECON® Fix electronics box
Artikel-No.
1068-26
- With quick fixing for installation without plaster
- With 4 x 3 screw domes
- Side-neutral combination
- Many through-wiring possibilities
- Standardised combination distance 71 mm
UP¹ ECON® Fix two-gang junction box
Artikel-No.
1656-26
- With quick fixing for installation without plaster
- With 4 x 3 screw domes
- Side-neutral combination
- Many through-wiring possibilities
- Standardised combination distance 71 mm
accessories
Practical accessories and tools for every situation.
Signal cover UP¹ for installation openings Ø 60 mm
Artikel-No.
1181-65
- Reusable
- Protects interior of box, screwing dome and screw heads when plastering
UP¹ Fix stepless plaster compensation frame
Artikel-No.
1155-65
- To compensate for deep-seated boxes
- To maintain IP protection class
- With 2 fixing screws 40 mm
- Check compatibility when installing large built-in appliances
Plaster compensation ring Ø 60 mm, height 12 mm
Artikel-No.
1155-63
- to compensate for deep-seated boxes
- To maintain IP protection class
- With 2 screwed-in device screws
- with 2 ring attachment screws
Distance support UP¹ 91 mm
Artikel-No.
1159-35
- für Kombinationsabstand 91 mm, z. B. bei Antennensteckdosen, Telefondosen oder EDV-Anschlussdosen mit nicht berührungssicheren Steckdoseneinsätzen
- erweitert den 71 mm Normabstand um 20 mm auf 91 / 111 / 131 / 151 mm usw.
Plaster compensation ring Ø 60 mm, height 24 mm
Artikel-No.
1155-64
- to compensate for deep-seated boxes
- To maintain IP protection class
- With 2 screwed-in device screws
- with 2 ring attachment screws
Distance support UP¹ 91 mm, air-tight
Artikel-No.
1159-33
- für Kombinationsabstand 91 mm, z. B. bei Antennensteckdosen, Telefondosen oder EDV-Anschlussdosen mit nicht berührungssicheren Steckdoseneinsätzen
- erweitert den 71 mm Normabstand um 20 mm auf 91 / 111 / 131 / 151 mm usw.
Signal cover UP¹ for installation openings Ø 2x60 mm
Artikel-No.
1181-16
- Reusable
- Protects interior of box, screwing dome and screw heads when plastering
Flush-mounting gun foam
Artikel-No.
1155-95
- For additional fixing of the UP¹ ECON® Fix boxes
- For processing with commercially available PU foam guns with M65 threaded connection
- Can be used with Art. No. 1055-26, 1555-26, 1068-26 and 1656-26
- 1-component PU foam
- Building material class E according to EN 13501 (DIN 4102 B2 quality)
- Fine-pored foam structure
- Ambient processing temperature -10°C to +30°C, optimum +20°C, 60% relative humidity (box temperature min. +5°C)
- Humidity curing
- Adhesive-free within approx. 10 min
- Can be cut after approx. 30 min.
- Fully loadable after approx. 12 h
- Temperature resistant cured from -40 °C to +80 °C
- Can be stored up to 12 months
- Please note the safety data sheet
