Are you looking for innovations? We provide solutions.
Innovation arises where experience meets progress.
For over 120 years, KAISER has been developing solutions for electrical installation that make day-to-day work easier, faster and safer – sustainable, durable and practical. “Designed by tradespeople, made by KAISER.” – this motto shapes our innovations. The focus is on the UP1 flush-mounting range as the new standard for modern installation: flexible in application, efficient to install and thoughtfully designed down to the last detail. The portfolio is complemented by new solutions for timber, concrete, cleanroom and damp-proof installations, further-developed fire protection systems, and innovative products for connectivity and cable management. KAISER stands for forward-looking, safe and tradesman-friendly solutions – and provides you with reliable support for your projects.
Get a brief overview of our innovations in the fields of flush-mounting, cavity wall installations, concrete construction, fire protection and tools. There is also plenty to discover in the worlds of connectivity, plug-in installations and cable glands – see for yourself.
KAISER Innovations
UP¹. Our best flush-mounting box. - All the benefits at a glance
Flush-mounting
A complete system for all flush-mounting and masonry applications. Air-tight, fire protection, soundproof, and suitable for both internal and external insulation.
UP¹ ECON® Fix one-gang box
Artikel-No.
1055-26
- More volume than conventional one-gang boxes
- With quick fixing for installation without plaster
- With 4 x 3 screw domes
- Side-neutral combination
- Many through-wiring possibilities
- Standardised combination distance 71 mm
UP¹ ECON® Fix electronics box
Artikel-No.
1068-26
- With quick fixing for installation without plaster
- With 4 x 3 screw domes
- Side-neutral combination
- Many through-wiring possibilities
- Standardised combination distance 71 mm
UP¹ ECON® Fix two-gang junction box
Artikel-No.
1656-26
- With quick fixing for installation without plaster
- With 4 x 3 screw domes
- Side-neutral combination
- Many through-wiring possibilities
- Standardised combination distance 71 mm
Signal cover UP¹ for installation openings Ø 60 mm
Artikel-No.
1181-65
- Reusable
- Protects interior of box, screwing dome and screw heads when plastering
UP¹ Fix stepless plaster compensation frame
Artikel-No.
1155-65
- To compensate for deep-seated boxes
- To maintain IP protection class
- With 2 fixing screws 40 mm
- Check compatibility when installing large built-in appliances
Telescope equipment carrier
Artikel-No.
1159-60
- for secure installation of luminaires and much more
- for use with external insulation of walls and ceilings
- installation area for dowel-free installation of accessories
Mini equipment carrier with 4 swivels and 2 ribs
Artikel-No.
1159-50
- Retrofitting in existing composite thermal insulation systems (ETICS)
- consisting of anchor sleeve and attachment core
- for insulation thicknesses of 80 mm and upwards
- Screw-on surface with 10 mm tolerance compensation
- 4 swivel cutters
- 2 ribs
- Sealing lip on all sides
- Weight loading up to 30 N (3 kg)
- equipment attached with self-tapping screws with Ø of 3.2 - 4 mm
Installation housing ThermoX® Iso +
Artikel-No.
1159-70
- with external insulation of ceilings
- for insulation thicknesses of 100 mm and above
- Adjustment to the insulation thickness in 10 mm steps
- for LED luminaires up to 8 Watt
- max. luminaire installation depth 70 mm to 130 mm (insulation thickness less 30 mm)
- Front panel with ceiling exit (CE) Ø 68 mm or universal up to Ø 86 mm
- Space for ballast devices 120 mm x 30 mm x 28 mm (installation diameter 68 mm, installation depth 70 mm)
One-gang junction box ECON® Iso +
Artikel-No.
1159-55
- for retrofitting in ETICS with wood fibre and rock wool insulation boards
- for insulation thicknesses of 60 mm and upwards
- 4 swivelling cutters for secure mechanical fastening
- 4 screw domes
- Sealing lip on all sides
- including centering aid
- including setting tool (Art. No.1090-22) per packaging unit
One-gang junction box ECON® Styro 55
Artikel-No.
1555-51
- Retrofitting in existing composite thermal insulation systems (ETICS)
- for insulation thicknesses of 80 mm and upwards
- 4 swivel cutters
- Clamping ribs
- Sealing lip on all sides
- including setting tool (Art. No.1090-22) per packaging unit
cavity wall
Suitable for all types of cavity walls: standard, air-tight and halogen-free. Solutions for damp and clean rooms, as well as fire protection, sound-insulating and radiation-protection walls.
Damp room one-gang junction box
Artikel-No.
9264-42
- Peripheral 5 cm wide adhesive collar to hold mineral sealing materials, e. g. sealing slurries
- Convenient sealing into the sealing layer thanks to the fleece-like surface structure of the sealing sleeve
- Tested and certified for applications according to DIN 18534
- Air-tight and watertight design with sealing membranes for six cables up to max. Ø 11.5 mm with integrated cable retention
- Can be used with the KAISER plaster compensating rings (Art. No. 9155-61 or -62) with built-up wall coverings
One-gang junction box for solid wood
Artikel-No.
9274-22
- Rib fastening for installation in cross-laminated timber or laminated timber walls or in solid wood panels
- Innovative cable entries positioned on the side of the box circumference
- 4 screw domes
- Toolless opening of the cable entries using an opening tab
- Fully insulated through-wiring for combinations using support connectors
- including setting tool (Art. No. 1090-12) per packaging unit
Clean room one-gang junction box with peripheral sealing lip, depth 62 mm
Artikel-No.
9264-32
- For professional installation in clean room walls and functioning containments
- Certified according to VDI 2083 sheet 19 (tightness class 7)
- Airtight design with sealing membranes and peripheral sealing lip
- For cables up to max. Ø 11.5mm with integrated cable retention
Installation housing O-range ECON® Universal 120, air-tight, Depth 65 mm
Artikel-No.
9273-50
- With universal screw-on surface for mounting accessories and installation accessories
- For individual round and cornered installation openings
- Air-tight design with sealing membranes
- Toolless cable or conduit entries
- Integrated cable retention of NYM cables, self-locking of conduits
Wall and ceiling transition 90° Ø 20 mm
Artikel-No.
9261-20
- Two-part design with secure catch mechanism
- Air-tight component closure for front and rear installation in the boarding of wall elements or modules
- Flexible cable pull-in from both directions thanks to 90° bend without abutting edges
- Wall connection element can be used on both sides for 90° bends and electrical conduit
- Flat collar for a firm and flush fit in the wall element
Wall and ceiling transition 90° Ø 25 mm
Artikel-No.
9261-25
- Two-part design with secure catch mechanism
- Air-tight component closure for front and rear installation in the boarding of wall elements or modules
- Flexible cable pull-in from both directions thanks to 90° bend without abutting edges
- Wall connection element can be used on both sides for 90° bends and electrical conduit
- Flat collar for a firm and flush fit in the wall element
Junction box Ø 120 mm O-range ECON®, air-tight, Depth 65 mm
Artikel-No.
9273-92
- Air-tight design with sealing membranes
- for 2 electrical circuits use separator wall 9073-20
- receptacle for TS 35 standard rail
- with stable holding ring
- Cutting the installation opening with bi-metal cutter 1082-20 or VARIOCUT 1089-00
- including cover and screws
O-range ECON® Fix one-gang junction box, air-tight, Depth 62 mm
Artikel-No.
9264-12
- Clamping ribs fastening in building materials from 10 mm thickness, e.g. wall constructions with OSB boards, gypsum fibre boards and exposed masonry
- 4 screw domes
- Air-tight design with sealing membranes
- Toolless cable or conduit entries
- Fully insulated, air-tight through-wiring for combinations using support connectors
- Integrated cable retention of the NYM cable, self-locking of the conduit
- including setting tool (Art. No. 1090-12) per packaging unit
O-range ECON® Data one-gang connection box, air-tight, Depth 74 mm
Artikel-No.
9280-22
- for network, coaxial, NYM and communication lines as well as fibre optic cables
- 4 screw domes
- Air-tight design with sealing membranes
- Toolless cable or conduit entries
- integrated NYM cable retention, self-locking of the communication cables and conduits
- Can be combined with all O-range® programme applications
Sound-insulation box 68 Flex
Artikel-No.
9068-94
- for sound insulation walls
- for accessories and electronic components
- Air-tight design with sealing membranes
- Elastic tunnel
- can be combined with sound insulation boxes 68
Concrete construction – on-site mixed concrete
Boxes, housing, electric cables and pipe systems for on-site mixed concrete, including 3D concrete printing.
Central transition casing for universal conduit entries
Artikel-No.
9914.10
- Material: Polyethylene
- Processing temperature: -5 °C / + 60 °C
Prefix® concrete construction box Ø 60 mm
Artikel-No.
1211-01
- One-gang junction box for fixing to the reinforcement
- Can be used for concrete coverings from 20 - 60 mm
- Pre-fixing by means of Prefix® installation technology
- 1-piece with moulded front and rear part
- Standardised combination distance 71 mm
- with 4 screw domes and 2 expanding claw fields
- Art. No. 1211-01 replaces Art. No. 1211-61
Prefix® concrete construction box Ø 35 mm
Artikel-No.
1211-02
- Wall-light connection box for fixing to the reinforcement
- Can be used for concrete coverings from 20 - 60 mm
- Pre-fixing by means of Prefix® installation technology
- 1-piece with moulded front and rear part
- Art. No. 1211-02 replaces Art. No. 1211-36
B¹ one-gang box
Artikel-No.
1255-01
- with 4 screw domes and 2 expanding claw fields
- 2-piece with moulded rear part
- Two slots for B¹ Prefix® system wings
- Rear part of box with slot for support element
- Suitable for all types of formwork
- Standardised combination distance 71 mm
B¹ one-gang junction box
Artikel-No.
1265-01
- with 4 screw domes and 2 expanding claw fields
- 2-piece with moulded rear part
- Two slots for B¹ Prefix® system wings
- Rear part of box with slot for support element
- Suitable for all types of formwork
- Standardised combination distance 71 mm
B¹ large conduit one-gang junction box
Artikel-No.
1260-01
- with 4 screw domes and 2 expanding claw fields
- 2-piece with moulded rear part
- Two slots for B¹ Prefix® system wings
- Rear part of box with slot for support element
- Suitable for all types of formwork
- Standardised combination distance 71 mm
B¹ wall light connection box
Artikel-No.
1248-01
- space for 3 terminal blocks and associated cables
- 2-piece with moulded rear part
- Two slots for B¹ Prefix® system wings
- Rear part of box with slot for support element
- Suitable for all types of formwork
B¹ universal wall exit
Artikel-No.
1248-03
- Accessory fitting without drilling or dowelling
- space for 3 terminal blocks and associated cables
- Grey front part version for exposed concrete applications
- 2-piece with moulded rear part
- Two slots for B¹ Prefix® system wings
- Rear part of box with slot for support element
- Suitable for all types of formwork
Large slab ceiling box 115
Artikel-No.
1227-16
- For in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Installation height 115 mm, with M5 metal nut for light hook (min. hook length: 115 mm + plaster thickness)
- With closing cover for on-site fitting of conduits
- Maximum light hook load according to DIN EN 60670 100 N (10 kg)
Universal-waterproof cover Ø 90 mm, Screw spacing 60 mm
Artikel-No.
1174-98
- central entry with stoppers
- for countersunk screws Ø 4 mm
Precast concrete construction
Boxes, housing, electric cables and pipework systems for automated and manual precast concrete production, as well as for modular room units.
Central transition casing for universal conduit entries
Artikel-No.
9914.10
- Material: Polyethylene
- Processing temperature: -5 °C / + 60 °C
Conduit connector 90° for DIN EN conduit Ø 20 mm
Artikel-No.
1262-20
- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Easy cable pull-in thanks to optimised 90° conduit elbow
Wall and ceiling transition 90° Ø 20 mm
Artikel-No.
1261-95
- For connecting conduits at transition points
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Large adhesive surface
- Ideally suited for the construction of a rigid conduit system
- For overhead installation in solid walls
- With closing cover to prevent ingress of foreign bodies
- Can be combined with end and transition grommets and 30° wall and ceiling bends
- Two slots for Prefix® system accessories
- Suitable for all types of formwork
- Two nail domes
One-gang box Flat 45
Artikel-No.
1256-01
- For use in walls from 5 cm
- Attachment of the Flat 45 fixing and support elements by push-button connection
- 1-piece with moulded rear part
- Standardised combination distance 71 mm
- with 4 screw domes
B² one-gang junction box for system magnet, depth 68.5 mm
Artikel-No.
1263-06
- for in-factory installation
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- 1-piece
- 4 screw domes and 2 expanding claw fields for accessory fitting
- Standardised combination distance 71 mm
One-gang junction box Flat 45
Artikel-No.
1266-01
- For use in walls from 5 cm
- With lateral terminal compartment
- Attachment of the Flat 45 fixing and support elements by push-button connection
- 1-piece with moulded rear part
- Standardised combination distance 71 mm
- with 4 screw domes
Wall light connection box Flat 45
Artikel-No.
1246-01
- For use in walls from 5 cm
- Attachment of the Flat 45 fixing and support elements by push-button connection
- 1-piece with moulded rear part
Conduit connector for DIN EN conduit Ø 20 mm
Artikel-No.
1261-21
- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Art.-Nr. 1261-21 replaces Art. No. 1261-20 and Art. No. 1261-26 replaces Art. No. 1261-25
Conduit transition coupling Ø 32 mm
Artikel-No.
1263-32
- For toolless connection of Ø 32 mm conduits to the B² one-gang junction boxes 1262-XX and 1263-XX
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits from penetrating the B² one-gang junction boxes and thus avoids subsequent conduit shortening
fire protection
Box, housing and bulkhead systems for fire protection walls and ceilings.
HWD 68+ one-gang box
Artikel-No.
9463-03
- For F30-F90 or EI30-EI90, F30-B to F90-B fire-protection walls
- also for directly opposing installation
- from wall thicknesses of 100 mm
- can be combined with each other and with the one-gang junction box
HWD 68+ one-gang junction box
Artikel-No.
9464-03
- For F30-F90 or EI30-EI90, F30-B to F90-B fire-protection walls
- also for directly opposing installation
- from wall thicknesses of 125 mm
- combinable with each other and with the one-gang box
Fire protection PROTECT® one-gang junction box for solid wood
Artikel-No.
9464-05
- For F30-B to F120-B solid wood elements
- Mounting with rib fixing
- Cable entry enables tolerance compensation of the cable route
- Also for directly opposing installation
- Preserves the sound insulation properties of the solid wood elements
B15 PROTECT® cable sealing
Artikel-No.
9459-14
- For shipbuilding walls and ceilings in the category B15 separation planes and for use in solid wood walls
- For pre-assembled cables
- For fire protection sealing of cable entries
- Without the use of fire protection putty
- Self-supporting sealing through insulation-forming material
B15 PROTECT® multiple sealing
Artikel-No.
9459-15
- For shipbuilding walls and ceilings in the category B15 separation planes and for use in solid wood walls
- For pre-assembled cables
- For fire protection sealing of cable entries
- Without the use of fire protection putty
- Self-supporting sealing through insulation-forming material
Shipbuilding
B15 PROTECT® fire protection boxes and cable bulkheads ensure fire protection in walls and ceilings for fire protection class B15 on ships.
B15 PROTECT® cable sealing
Artikel-No.
9459-14
- For shipbuilding walls and ceilings in the category B15 separation planes and for use in solid wood walls
- For pre-assembled cables
- For fire protection sealing of cable entries
- Without the use of fire protection putty
- Self-supporting sealing through insulation-forming material
B15 PROTECT® multiple sealing
Artikel-No.
9459-15
- For shipbuilding walls and ceilings in the category B15 separation planes and for use in solid wood walls
- For pre-assembled cables
- For fire protection sealing of cable entries
- Without the use of fire protection putty
- Self-supporting sealing through insulation-forming material
O-range® one-gang box, Depth 49 mm, halogen-free
Artikel-No.
9063-78
- Screws ensure permanent fixing
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
- Fully insulated through-wiring for combinations using support connectors
- Can be combined with all O-range® programme applications
O-range® one-gang junction box, Depth 62 mm, halogen-free
Artikel-No.
9064-78
- Screws ensure permanent fixing
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
- Fully insulated through-wiring for combinations using support connectors
- Can be combined with all O-range® programme applications
One-gang box, Depth 35 mm, halogen-free
Artikel-No.
9061-77
- Screws ensure permanent fixing
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
- Fully insulated through-wiring for combinations using support connectors
- Can be combined with all O-range® programme applications
Two-gang junction box, Depth 47 mm, halogen-free
Artikel-No.
9062-77
- for 2 electrical inserts or 1 block insert
- with cover (Art. No. 9062-90), for use as a junction box
- use separator wall to separate electrical circuits Art. No. 9062-22
- With holding ring
Electronics box O-range ECON® Flex, air-tight, Depth 75 mm, halogen-free
Artikel-No.
9268-74
- for accessories and electronic components
- Air-tight design with sealing membranes
- Elastic tunnel
- Combinable with ECON® one-gang junction boxes
HWD B15 one-gang junction box for thin boarding
Artikel-No.
9464-14
- for shipbuilding walls of category B15
AK2-S/MK Cable box cable duct
Artikel-No.
AT2216
- Packed per junction box 3 KBS 16 mm slide inlets and 1 shutter slide.
- Matching AK2 front part can be ordered separately.
- Each article is packaged with 3x KBS 16 mm inlets and 1 locking slider
- Matching AK2 front part can be ordered separately
- Suitable for cable support systems from well-known manufacturers
O-range ECON® 2 one-gang junction box, air-tight, Depth 48 mm, halogen-free
Artikel-No.
9252-78
- Air-tight design with sealing membranes
- Toolless cable and conduit entires
- Integrated cable retention of the NYM cable, self-locking of the conduit
- Standardised separation of individual installation openings using a bridge
- Can be combined with all O-range® programme applications
O-range ECON® 3 one-gang junction box, air-tight, Depth 48 mm, halogen-free
Artikel-No.
9253-78
- Air-tight design with sealing membranes
- Toolless cable and conduit entires
- Integrated cable retention of the NYM cable, self-locking of the conduit
- Standardised separation of individual installation openings using a bridge
- Can be combined with all O-range® programme applications
Pluggable installation
Modular distribution enclosures for cable support systems. Waterproof cable junction casing for outdoor applications.
AK2 Data basic housing with flat mounting plate
Artikel-No.
AT1960
- Each cable box includes 2 soft slide-in data lead-ins and 1 slide-in blind cover'.
- Version with flat plastic mounting plate for quick click-mounting on cable trays.
- Matching AK2-D lid and RJ45 adapters can be ordered separately.
- Suitable for cable trays from Legrand (Van Geel), Stago, Niedax, Vergokan, PUK and OBO.
- 2 cable entries and 1 blanking plug are included per item
- Matching AK2 front part can be ordered separately
- Suitable for cable support systems from well-known manufacturers
AK2 Data basic housing with angled mounting plate
Artikel-No.
AT1961
- Each cable box includes 2 soft slide-in data lead-ins and 1 slide-in blind cover'.
- Version with set plastic mounting plate for quick click-assembly on cable trays.
- Matching AK2-D lid and RJ45 adapters can be ordered separately.
- Suitable for cable trays from Legrand (Van Geel), Stago, Niedax, Vergokan, PUK and OBO.
- 2 cable entries and 1 blanking plug are included per item
- Matching AK2 front part can be ordered separately
- Suitable for cable support systems from well-known manufacturers
Pluggable AK2 front part, Wieland GST18, out: 3x5pin DALI blue
Artikel-No.
AT6328
- For DALI controlled lighting.
- Equipped with VD wire 2.5 mm².
- All connectors are equiped with locking.
- Wieland gesis® CLASSIC GST18® snap-in connector
- 5-pin for DALI applications
- Connectors are self-locking, can be released with tools
- Prefabricated with connection wires 2.5 mm²
Pluggable AK2 front part, WAGO WINSTA® MIDI, out: 3x5pin DALI blue
Artikel-No.
AT7746
- For DALI controlled lighting.
- Equipped with VD wire 2.5 mm².
- All connectors are equiped with locking.
- WAGO WINSTA® MIDI snap-in connector
- 5-pin for DALI applications
- Connectors are self-locking, can be released with tools
- Prefabricated with connection wires 2.5 mm²
AK2-S/GZ/WAK 3p, cover 2x3p WAGO
Artikel-No.
AT4746
- Pre-shaped plastic assembly bracket for quick click-assembly on all common cable ducts.
- Set of mounting brackets for quick "click" mounting on all common cable trays
- Wiring: 2.5 mm²
AK2-S/GZ/WAK 3p, double socket cover WAGO
Artikel-No.
AT4732
- Equipped with double wall socket.
- Pre-shaped plastic assembly bracket for quick click-assembly on all common cable ducts.
- Wiring: 2.5 mm²
- Set of mounting brackets for quick "click" mounting on all common cable trays
AK2-S/GZ/WIK 3p, cover 2x3p Wieland
Artikel-No.
AT4621
- Pre-shaped plastic assembly bracket for quick click-assembly on all common cable ducts.
- Wiring: 2.5 mm²
- Wiring: 2.5 mm²
- Set of mounting brackets for quick "click" mounting on all common cable trays
AK2-S/GZ/WIK 3p, double socket cover Wieland
Artikel-No.
AT4601
- Equipped with double wall socket.
- Pre-shaped plastic assembly bracket for quick click-assembly on all common cable ducts.
- Wiring: 2.5 mm²
- Set of mounting brackets for quick "click" mounting on all common cable trays
AK2-S/GZ/WAK 3p, cover 4x3p WAGO
Artikel-No.
AT4734
- Pre-shaped plastic assembly bracket for quick click-assembly on all common cable ducts.
- Wiring: 2.5 mm²
- Set of mounting brackets for quick "click" mounting on all common cable trays
AK2-S/GZ/WAK 3p, four socket cover WAGO
Artikel-No.
AT4733
- Equipped with quadruple wall socket.
- Pre-shaped plastic assembly bracket for quick click-assembly on all common cable ducts.
- Wiring: 2.5 mm²
- Set of mounting brackets for quick "click" mounting on all common cable trays
AK2-S/GZ/WIK 3p, cover 4x3p Wieland
Artikel-No.
AT4604
- Pre-shaped plastic assembly bracket for quick click-assembly on all common cable ducts.
- Wiring: 2.5 mm²
- Set of mounting brackets for quick "click" mounting on all common cable trays
AK2-S/GZ/WIK 3p, double socket cover Wieland
Artikel-No.
AT4602
- Equipped with quadruple wall socket.
- Pre-shaped plastic assembly bracket for quick click-assembly on all common cable ducts.
- Wiring: 2.5 mm²
- Set of mounting brackets for quick "click" mounting on all common cable trays
Connectivity / Fibre-optic broadband roll-out
Solutions for professional fibre-optic broadband roll-out. Fibre-optic laying and installation in street distribution (network level 3) and building and domestic distribution (network level 4).
E3S Connect® accessory box
Artikel-No.
4261011
- E3S Connect® accessory box equipped with:
- Cleaning tool: click cleaner for cleaning LC fibre optic connectors plugged into the connector, microfibre cleaning cassette for various fibre optic connectors, lint-free cleaning cloths for fibre cleaning
- Tools: screwdriver, Kevlar scissors, stripping tool
- Optical termination outlets: optical termination outlet flush-mounting (Art. No. 4252001), optical termination outlet flush-mounting (Art. No. 4250001)
- E3S Connect® spare parts: 25 x E3S Connect® housing, 25 x E3S Connect® locking element, 25 x E3S Connect® dust cap, 1 x LC/APC Quad connector, 2 x LC/APC Duplex connector
E3S Connect® (FO-SC) subscriber connection, surface-mounting, 2xF, LC/APC DX, L=30m, HTP
Artikel-No.
4252038
- Scope of delivery: FO subscriber connection, LC-APC coupling and pre-assembled E3S Connect® fibre optic cable
E3S Connect® (FO-SC) subscriber connection, flush-mounting, 4xF, LC/APC QD, L=30m, HTP
Artikel-No.
4250028
- Scope of delivery: FO subscriber connection, LC-APC coupling and pre-assembled E3S Connect® fibre optic cable
Fiber distribution cabinet (FDC), up to 576 fibers, 48 outbound cables, loop, IP54
Artikel-No.
4231011
- Scope of delivery: FDC housing, FDC plinth, 24x strain-relief for ducts, strain-relief with fiber routing, cable overlength tray, loop
- Plastic housing made of glass-fiber-reinforced duroplastic polyester
- swinging splice tray
- C-rail in plinth for composite support
- Door latch with three-point locking
- Strain relief for up to 48 micro-duct pipes 7-12 mm
- Installation of up to 48 splice trays 4 mm
- ribbed front ensures more difficult placarding
- Housing with predetermined breaking point
Fiber distribution cabinet (FDC), up to 1,728 fibers, 96 outbound cables, loop, IP54
Artikel-No.
4231012
- Scope of delivery: FDC housing, FDC plinth, 48x strain-relief for ducts, strain relief with fiber routing, cable overlength tray, loop, 2 energy chains
- Plastic housing made of glass-fiber-reinforced duroplastic polyester
- Can be aligned without any gaps
- Variable door opening angle 90° or 130°
- Door latch with three-point locking
- Strain relief for up to 96 micro-duct pipes 7-12 mm
- Installation of up to 144 splice-trays 4 mm
- Energy chain ensures the connection between door and housing
- Housing with predetermined breaking point
Optical termination outlet (OTO), ready to splice with pre-assembled cable, 4x fibres, 30 m
Artikel-No.
4252031
- Scope of delivery: OTO, LC/APC coupling, connector and fibre optic cable
Optical termination outlet (OTO), partial equipped
Artikel-No.
4252002
- Scope of delivery: OTO, 1x LC/APC DX coupler
Optical termination outlet (OTO), splice ready
Artikel-No.
4252005
- Scope of delivery: OTO, 2x LC/APC DX coupler, 4x pigtails
Optical termination outlet (OTO), partial equipped
Artikel-No.
4250001
- Scope of delivery: OTO, 1x LC/APC QD coupler
Distribution closure, housing underground for FMP, IP68
Artikel-No.
AT29030
- Easy assembly.
- Scope of delivery: distribution closure, sand seal
House transfer point HTP, 2 fibres, 1 LC/APC DX, shutter
Artikel-No.
AT29221
- Easy installation.
- Clear assembly sequence.
- Universally applicable (for indoor use).
- Scope of delivery: HTP with cover, LC/APC duplex coupling
Mains distributor NVt, 192 fibres, CSP, 48 outlets, loop, IP65
Artikel-No.
AT29321
- Street cabinet:
- 60 - 80 μm polyester powder coating.
- Integrated foundation
- Stainless steel
- Universal ½ Euro-cylinder
- Weatherproof mounting panel
- Removable front panel
- Pre-assembled fixing points for ducts and cables.
- FM Box:
- 48 hybrid entry ports Ø 3,0 - 8,0 mm.
- Flexibility in the FTTX concept.
- Flexibility in fiber network management.
- Integrated strain relief per cable / duct.
- Easy entry seal for each individual cable or duct.
- Structured management of cables, fibres and welding protectors.
- Suitable for direct buried customer cables and ducts
- Easy to install.
- Save on working time
- IP65 Waterproof
- Impact-resistant.
- Window Cut.
- Scope of delivery: Gf-NVt, FMB including splice cassettes, 4x stainless steel bolts, sealing material, moisture absorber
Midi fiber dome (MFD), 24 fibers, CSP, 6 outlets, loop, IP68
Artikel-No.
AT29293
- Flexibility in FttH concept.
- Multi-functional product.
- Integrated strain relief per cable / duct.
- Window Cut possibility.
- Plug & Play installation.
- 2x 12 splice protectors ANT or mini heatshrink.
- Scope of delivery: midi fibre dome, sealing material
Cable glands
The professional range for efficient cable management. Screw attachments in all sizes, made from plastic, brass and stainless steel.
Cable glands Progress® EMC easyCONNECT stainless steel A2 with contact spring
Artikel-No.
1083.12.96.050
- Two-piece sealing insert
- not overall length insulated
- For high temperature applications
Cable glands Progress® multiLAYER nickel-plated brass
Artikel-No.
F1100.4.20
- Multi-piece sealing insert
- not overall length insulated
Cable glands Progress® multiLAYER synthetic GFK
Artikel-No.
1520.4.20
- White RAL 9010
- Multi-piece sealing insert
Cable glands Progress® multiLAYER synthetic GFK
Artikel-No.
1571.4.20
- Light grey RAL 7035
- Multi-piece sealing insert
Cable glands Progress® EMC powerCONNECT nickel-plated brass
Artikel-No.
1084.17
- Two-piece sealing insert
- not overall length insulated
Cable glands Progress® EMC powerCONNECT nickel-plated brass
Artikel-No.
1184.17
- Two-piece sealing insert
- not overall length insulated
AGRO cable glands Progress® EMC easyCONNECT with clamps increased safety Ex e II
Artikel-No.
EX1803.83.12.065
- Two-piece sealing insert
- not overall length insulated
AGRO cable glands Ex Compact nickel-plated brass flameproof enclosure Ex d IIC and increased safety Ex e II
Artikel-No.
EX1126.3/8NPT.070
- One-piece sealing insert
- not overall length insulated
AGRO cable glands Ex Compact nickel-plated brass with clamps Ex d IIC and Ex e II
Artikel-No.
EX1826.17.070
- One-piece sealing insert
- not overall length insulated
AGRO cable glands Ex Compact nickel-plated brass flameproof enclosure Ex d IIC and increased saftey Ex e II
Artikel-No.
EX1126.17.070
- One-piece sealing insert
- not overall length insulated
AGRO cable glands Progress® EMC easyCONNECT with clamps increased safety Ex e II
Artikel-No.
EX1813.83.12.065
- Two-piece sealing insert
- not overall length insulated
Tools
High-quality system tools for professional electrical installation.
PROFI cutter Ø 68 mm with countersink hole cutter, holder, centering drill
Artikel-No.
1081-10
- high cutting power
- precise cut for circular drilled holes
- high radial runout accuracy
- Removable countersink hole cutter
- Fits all electric drills with 13 mm chuck
EXPERT carbide cutter Ø 68 mm with countersink hole cutter, holder, centering drill
Artikel-No.
1082-30
- Carbide tipped cutter head and countersink hole cutter
- extremely powerful
- very long operating life
- Removable countersink hole cutter
- Fits all electric drills with 13 mm chuck
Quick ejector set with PROFI cutter head Ø 68 mm, accessories
Artikel-No.
1083-80
- including KAISER PROFI cutter head Ø 68 mm with adapter
- with centering drill Ø 6 mm
- Allen key 2.5 and 5 mm
Dust extraction for cavity wall cutters
Artikel-No.
1088-50
- Exclusively for PROFI or EXPERT cutter heads Ø 68 or Ø 74 mm
- Vacuum cleaner hose attachments from Ø 31 - 36 mm
- Including centring drill Ø 6 mm
BASIC cutter Ø 86 mm
Artikel-No.
1084-86
- With countersink hole cutter, holder and centering drill
- Removable countersink hole cutter
- Fits all electric drills with 13 mm chuck
- For ceiling-flush installation of ThermoX® LED housing (DA 86), Art. No. 9320-20, 9320-21
BASIC cutter Ø 74 mm with holder and centring drill
Artikel-No.
1084-74
- With holder and centring drill
- Fits all electric drills with 13 mm chuck
SPECIAL cutter MDF Ø 68 mm
Artikel-No.
1085-68
- especially for medium density fibreboard MDF
- very suitable for wood materials
- With countersink hole cutter, holder and centering drill
- ground carbide teeth for fast cutting
- no clogging due to large chip space
- very long operating life
- Removable countersink hole cutter
- Fits all electric drills with 13 mm chuck
SPECIAL cutter METAL Ø 68 mm with holder and centering drill
Artikel-No.
1086-68
- specially for sheet metal panelling made of unalloyed/alloyed steels, non-ferrous metals
- Fine bi-metal toothing 10 teeth pi
- special centering drill for exact drilling
- Fits all electric drills with 13 mm chuck