Plaster compensation rings, accessories
Support connector, air tight
recommendations
Cavity wall one-gang junction box
Article No.
9066-01
- incl. 10 connection pieces (for every 25 boxes)
- With holding ring
One-gang junction box for solid wood
Article No.
9066-12
- for clamped attachment in solid wood from 10 mm thickness upwards
- not suitable for use with plasterboard or mineral fibreboard!
- With holding ring
One-gang box for thin boardings
Article No.
9068-01
- for boardings that do not permit any countersinking
- Combinations only possible with boxes with the same Art. No.
- with thin holding ring
O-range ECON® 63 one-gang box, air-tight, Depth 49 mm
Article No.
9263-22
- Air-tight design with sealing membranes
- Fully insulated, air-tight through-wiring for combinations using support connectors
- Toolless cable or conduit entries
- Integrated cable retention of NYM cables, self-locking of conduits
O-range ECON® 64 one-gang junction box, air-tight, Depth 62 mm
Article No.
9264-22
- Air-tight design with sealing membranes
- Fully insulated, air-tight through-wiring for combinations using support connectors
- Toolless cable or conduit entries
- Integrated cable retention of NYM cables, self-locking of conduits
Two-gang junction box, Depth 47 mm
Article No.
9062-02
- for 2 electrical inserts or 1 block insert
- with cover (Art. No. 9062-90), for use as a junction box
- use separator wall to separate electrical circuits Art. No. 9062-22
- With holding ring
Electronic box with partition and cover, airtight, depth 75 mm
Article No.
9062-94
- air-tight version with additional sealing lip
- Tunnel twin-chamber box with enclosed separator wall and cover that can be wallpapered over.
- for accessory inserts and electronic components, such as EIB actuators, communication technology, radio control elements, alarm modules, etc.
- With holding ring
Electronics box O-range ECON® Flex, air-tight, Depth 75 mm
Article No.
9268-94
- for accessories and electronic components
- Air-tight design with sealing membranes
- Elastic tunnel
- Combinable with ECON® one-gang junction boxes
O-range ECON® conduit one-gang junction box, air-tight, Depth 62 mm
Article No.
9266-22
- Air-tight design with sealing membranes
- fully-insulated through-wiring for combinations of conduit one-gang junction boxes with support connectors
- toolless conduit entries
similar
Support connector, air-tight, halogen-free
Article No.
9060-78
- For fully insulated through-wiring in combinations
- to make air-tight combinations
- for Art. Nos. 9066-01/12, 9068-01, 9263-..., 9264-… , 9062-02/-77, 9062-94/-74, 9268-94/-74, 9266-22/-77
Assembly / Installation
- Assembly type:
- HW (drywall/lightweight construction)
Cavity wall one-gang junction box
Article No.
9066-01
- incl. 10 connection pieces (for every 25 boxes)
- With holding ring
One-gang junction box for solid wood
Article No.
9066-12
- for clamped attachment in solid wood from 10 mm thickness upwards
- not suitable for use with plasterboard or mineral fibreboard!
- With holding ring
One-gang box for thin boardings
Article No.
9068-01
- for boardings that do not permit any countersinking
- Combinations only possible with boxes with the same Art. No.
- with thin holding ring
O-range ECON® 63 one-gang box, air-tight, Depth 49 mm
Article No.
9263-22
- Air-tight design with sealing membranes
- Fully insulated, air-tight through-wiring for combinations using support connectors
- Toolless cable or conduit entries
- Integrated cable retention of NYM cables, self-locking of conduits
O-range ECON® 64 one-gang junction box, air-tight, Depth 62 mm
Article No.
9264-22
- Air-tight design with sealing membranes
- Fully insulated, air-tight through-wiring for combinations using support connectors
- Toolless cable or conduit entries
- Integrated cable retention of NYM cables, self-locking of conduits
Two-gang junction box, Depth 47 mm
Article No.
9062-02
- for 2 electrical inserts or 1 block insert
- with cover (Art. No. 9062-90), for use as a junction box
- use separator wall to separate electrical circuits Art. No. 9062-22
- With holding ring
Electronic box with partition and cover, airtight, depth 75 mm
Article No.
9062-94
- air-tight version with additional sealing lip
- Tunnel twin-chamber box with enclosed separator wall and cover that can be wallpapered over.
- for accessory inserts and electronic components, such as EIB actuators, communication technology, radio control elements, alarm modules, etc.
- With holding ring
Electronics box O-range ECON® Flex, air-tight, Depth 75 mm
Article No.
9268-94
- for accessories and electronic components
- Air-tight design with sealing membranes
- Elastic tunnel
- Combinable with ECON® one-gang junction boxes
O-range ECON® conduit one-gang junction box, air-tight, Depth 62 mm
Article No.
9266-22
- Air-tight design with sealing membranes
- fully-insulated through-wiring for combinations of conduit one-gang junction boxes with support connectors
- toolless conduit entries
Support connector, air-tight, halogen-free
Article No.
9060-78
- For fully insulated through-wiring in combinations
- to make air-tight combinations
- for Art. Nos. 9066-01/12, 9068-01, 9263-..., 9264-… , 9062-02/-77, 9062-94/-74, 9268-94/-74, 9266-22/-77