Air-tight sleeve

accessories

Primer 250 ml, solvent-free
Artikel-No. 9000-02
  • The self-adhesive primer is water and heat resistant. It can also be used on Styrofoam, EPS, XPS etc.

similar

Air-tight sleeves for cables
Artikel-No. 9059-44
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for cables
Artikel-No. 9059-45
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for cables
Artikel-No. 9059-46
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for cables
Artikel-No. 9059-47
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-48
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-55
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-49
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-51
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-52
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-54
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air sealing sleeve for conduits, Ø 12 - 15 mm
Artikel-No. 9059-56
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free

Air-tight sleeve

Air-tight sleeve for sealing conduit and cable entries in the interior of air-tight building shells.
  • extremely strong adhesion
  • For guaranteed air-tight feed-throughs, especially in the attic
  • 12 types for different conduit and cable diameters
  • Suitable for moisture barrier foils, sarking membranes, OSB boards *

Examples of use

Processing instructions

Air-tight conduit entries can be made cleanly and easily by using the self-adhesive KAISER air-tight sleeves.
The sleeves create faster, more stable and, above all, more air-tight transitions than improvised methods.
Please ensure that the base is dry and free from dust and grease. Processing should be carried out at a temperature higher than -5°C, and full adhesive strength is achieved after 24 hours. The sleeves have an unlimited shelf life when stored cool and dry at room temperature. * For fibreboard, we recommend a pre-coat using primer

Measuring the air-tightness

Installation

Push the sleeve over the cable or conduit.
Push the sleeve over the cable or conduit.
Remove the foil from the sleeve.
Remove the foil from the sleeve.
Stick on the sleeve and press firmly on to the base, working outwards from the centre.
Stick on the sleeve and press firmly on to the base, working outwards from the centre.

Dimensions / Form

Product length:
230 mm
Product width:
230 mm
Product depth:
50 mm

Assembly / Installation

Assembly type:
HW (drywall/lightweight construction)

Safety / Properties

air tightness:
Yes
Instruction

Air-tight sleeve

Assembly instructions

1.3 MB | 11/03/2024
Energy efficiency.
Brochure

Energy efficiency.

Electrical installation for energy-saving buildings.

6.1 MB
Sealing sleeves
Flyer

Sealing sleeves

Reliable sealing of installation feed-throughs.

2.8 MB
Primer 250 ml, solvent-free
Artikel-No. 9000-02
  • The self-adhesive primer is water and heat resistant. It can also be used on Styrofoam, EPS, XPS etc.
Air-tight sleeves for cables
Artikel-No. 9059-44
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for cables
Artikel-No. 9059-45
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for cables
Artikel-No. 9059-46
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for cables
Artikel-No. 9059-47
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-48
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-55
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-49
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-51
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-52
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air-tight sleeves for conduits
Artikel-No. 9059-54
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free
Air sealing sleeve for conduits, Ø 12 - 15 mm
Artikel-No. 9059-56
  • Continuous sealing by means of air-tight layers for penetration of cables
  • extremely strong adhesion
  • Temperature resistance -30°C to +80°C, in the feed-through area up to +120°C
  • UV-resistant, halogen-free